Autor Lalic, Bojan
|
|
Documentos disponibles escritos por este autor (4)
Hacer una sugerencia Refinar búsquedaComparative Analysis of ICT in Education Between China and Central and Eastern European Countries / Liu, Dejian ; Huang, Ronghuai ; Lalic, Bojan ; Zeng, Haijun ; Zivlak, Nikola
Título : Comparative Analysis of ICT in Education Between China and Central and Eastern European Countries Tipo de documento: documento electrónico Autores: Liu, Dejian, ; Huang, Ronghuai, ; Lalic, Bojan, ; Zeng, Haijun, ; Zivlak, Nikola, Mención de edición: 1 ed. Editorial: Singapore [Malasya] : Springer Fecha de publicación: 2020 Número de páginas: X, 414 p. 58 ilustraciones, 52 ilustraciones en color. ISBN/ISSN/DL: 978-981-1568794-- Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Tecnologia Educacional Educación internacional Educación comparada Educación Digital y Tecnología Educativa Educación internacional y comparada Computadoras y Educación Índice Dewey: 371.33 Resumen: Este libro presenta el status quo de las tecnologías de la información y la comunicación (TIC) en la educación, centrándose en China y los 17 países de Europa central y oriental (PECO), incluidos Albania, Bosnia y Herzegovina, Bulgaria, Croacia, la República Checa y Estonia. , Grecia, Hungría, Letonia, Lituania, Macedonia, Montenegro, Polonia, Rumanía, Serbia, Eslovaquia y Eslovenia (el mecanismo de cooperación "17+1", como incubadora de una plataforma pragmática de cooperación transregional, creada por China y los 17 PECO ). Con los recientes avances de las TIC en China y los PECO, estas han asumido funciones cada vez más importantes en la educación, incluida la mejora de la calidad de la enseñanza y el aprendizaje, así como la promoción de la equidad en la educación. La importante contribución de las TIC a la educación permite alcanzar los objetivos del mecanismo de "cooperación 17+1" entre China y los PECO, que ha atraído considerable atención en todo el mundo, ha dado un nuevo impulso a la cooperación entre las dos partes y ha abierto un nuevo capítulo. en la cooperación China-PECO. Los colaboradores, todos provenientes de estos 18 países, describen el estado del arte de las TIC en la educación en sus respectivos países y se centran en tres aspectos principales, a saber: el perfil del país, el estado general del desarrollo de la educación y TIC en la educación. A su vez, los principales expertos en investigación sobre informatización educativa comparan la situación en diferentes países. En conjunto, los artículos ofrecen ideas valiosas para los responsables de la formulación de políticas y los educadores sobre cómo integrar las TIC en los procesos educativos y sobre la cooperación interregional con respecto a las TIC en la educación. Nota de contenido: Chapter 1: Report on ICT in Education in China -- Chapter 2: Report on ICT in Education in Albania -- Chapter 3: Report on ICT in Education in Bosnia and Herzegovina -- Chapter 4: Report on ICT in Education in the Republic of Bulgaria -- Chapter 5: Report on ICT in Education in the Republic of Croatia -- Chapter 6: Report on ICT in Education in the Czech Republic -- Chapter 7: Report on ICT in Education in the Republic of Estonia -- Chapter 8: Report on ICT in Education in the Republic of Greece -- Chapter 9: Report on ICT in Education in Hungary -- Chapter 10: Report on ICT in Education in Latvia -- Chapter 11: Report on ICT in Education in the Republic of Lithuania -- Chapter 12: Report on ICT in Education in Montenegro -- Chapter 13: Report on ICT in Education in the Republic of North Macedonia -- Chapter 14: Report on ICT in Education in the Republic of Poland -- Chapter 15: Report on ICT in Education in Romania -- Chapter 16: Report on ICT in Education in the Republic of Serbia -- Chapter 17: Report on ICT in Education in the Slovak Republic -- Chapter 18: Report on ICT in Education in the Republic of Slovenia -- Chapter 19: Comparative Analysis of ICT in Education between China and CEECs. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i Comparative Analysis of ICT in Education Between China and Central and Eastern European Countries [documento electrónico] / Liu, Dejian, ; Huang, Ronghuai, ; Lalic, Bojan, ; Zeng, Haijun, ; Zivlak, Nikola, . - 1 ed. . - Singapore [Malasya] : Springer, 2020 . - X, 414 p. 58 ilustraciones, 52 ilustraciones en color.
ISBN : 978-981-1568794--
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Tecnologia Educacional Educación internacional Educación comparada Educación Digital y Tecnología Educativa Educación internacional y comparada Computadoras y Educación Índice Dewey: 371.33 Resumen: Este libro presenta el status quo de las tecnologías de la información y la comunicación (TIC) en la educación, centrándose en China y los 17 países de Europa central y oriental (PECO), incluidos Albania, Bosnia y Herzegovina, Bulgaria, Croacia, la República Checa y Estonia. , Grecia, Hungría, Letonia, Lituania, Macedonia, Montenegro, Polonia, Rumanía, Serbia, Eslovaquia y Eslovenia (el mecanismo de cooperación "17+1", como incubadora de una plataforma pragmática de cooperación transregional, creada por China y los 17 PECO ). Con los recientes avances de las TIC en China y los PECO, estas han asumido funciones cada vez más importantes en la educación, incluida la mejora de la calidad de la enseñanza y el aprendizaje, así como la promoción de la equidad en la educación. La importante contribución de las TIC a la educación permite alcanzar los objetivos del mecanismo de "cooperación 17+1" entre China y los PECO, que ha atraído considerable atención en todo el mundo, ha dado un nuevo impulso a la cooperación entre las dos partes y ha abierto un nuevo capítulo. en la cooperación China-PECO. Los colaboradores, todos provenientes de estos 18 países, describen el estado del arte de las TIC en la educación en sus respectivos países y se centran en tres aspectos principales, a saber: el perfil del país, el estado general del desarrollo de la educación y TIC en la educación. A su vez, los principales expertos en investigación sobre informatización educativa comparan la situación en diferentes países. En conjunto, los artículos ofrecen ideas valiosas para los responsables de la formulación de políticas y los educadores sobre cómo integrar las TIC en los procesos educativos y sobre la cooperación interregional con respecto a las TIC en la educación. Nota de contenido: Chapter 1: Report on ICT in Education in China -- Chapter 2: Report on ICT in Education in Albania -- Chapter 3: Report on ICT in Education in Bosnia and Herzegovina -- Chapter 4: Report on ICT in Education in the Republic of Bulgaria -- Chapter 5: Report on ICT in Education in the Republic of Croatia -- Chapter 6: Report on ICT in Education in the Czech Republic -- Chapter 7: Report on ICT in Education in the Republic of Estonia -- Chapter 8: Report on ICT in Education in the Republic of Greece -- Chapter 9: Report on ICT in Education in Hungary -- Chapter 10: Report on ICT in Education in Latvia -- Chapter 11: Report on ICT in Education in the Republic of Lithuania -- Chapter 12: Report on ICT in Education in Montenegro -- Chapter 13: Report on ICT in Education in the Republic of North Macedonia -- Chapter 14: Report on ICT in Education in the Republic of Poland -- Chapter 15: Report on ICT in Education in Romania -- Chapter 16: Report on ICT in Education in the Republic of Serbia -- Chapter 17: Report on ICT in Education in the Slovak Republic -- Chapter 18: Report on ICT in Education in the Republic of Slovenia -- Chapter 19: Comparative Analysis of ICT in Education between China and CEECs. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i
Título : IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 – September 3, 2020, Proceedings, Part I Tipo de documento: documento electrónico Autores: Lalic, Bojan, ; Majstorovic, Vidosav, ; Marjanovic, Ugljesa, ; von Cieminski, Gregor, ; Romero, David, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2020 Número de páginas: XXXI, 692 p. 158 ilustraciones, 100 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-57993-7 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Ingenieria asistida por computadora Software de la aplicacion Ingeniería Informática Red de computadoras Inteligencia artificial Teoría de la codificación Teoría de la información Comercio electrónico Ingeniería y Diseño Asistidos por Computador (CAD CAE) Aplicaciones informáticas y de sistemas de información Ingeniería Informática y Redes Teoría de la codificación y la información comercio electrónico y negocios electrónicos Índice Dewey: 670.285 Resumen: El conjunto de dos volúmenes IFIP AICT 591 y 592 constituye las actas arbitradas de la Conferencia Internacional IFIP WG 5.7 sobre Avances en los Sistemas de Gestión de la Producción, APMS 2020, celebrada en Novi Sad, Serbia, en agosto/septiembre de 2020. Los 164 artículos presentados fueron cuidadosamente revisado y seleccionado entre 199 presentaciones. Discuten cuestiones apremiantes a nivel mundial en materia de fabricación inteligente, gestión de operaciones, gestión de la cadena de suministro e Industria 4.0. Los artículos están organizados en las siguientes secciones temáticas: Parte I: modelado avanzado, simulación y análisis de datos en redes de producción y suministro; fabricación avanzada, digital e inteligente; sistemas de gestión de calidad digitales y virtuales; fabricación en la nube; sistemas de producción ciberfísicos y gemelos digitales; interoperabilidad IIOT; planificación y optimización de la cadena de suministro; gestión de la cadena de suministro digital e inteligente; gestión de redes logísticas inteligentes; inteligencia artificial y tecnologías blockchain en logística y DSN; nuevos enfoques de planificación y control de la producción; aprendizaje automático e inteligencia artificial; fábricas inteligentes y conectadas del futuro; ingeniería de sistemas de fabricación: ágil, flexible, reconfigurable; sistemas de asistencia digital: realidad aumentada y realidad virtual; diseño e ingeniería de productos circulares; fabricación circular, verde y sostenible; evaluaciones del ciclo de vida ambiental y social; aspectos socioculturales en los sistemas de producción; gestión de operaciones de servicios y fabricación basada en datos; sistemas producto-servicio en DSN; y diseño e ingeniería colaborativos Parte II: el Operador 4.0: nuevos caminos evolutivos físicos y cognitivos; enfoques de transformación digital en la gestión de la producción; transformación digital para cadenas de suministro más sostenibles; aplicaciones basadas en datos en sistemas de logística y fabricación inteligentes; servicios basados en datos: características, tendencias y aplicaciones; el futuro del pensamiento y la práctica lean; manufactura esbelta digital y sus prácticas emergentes; nuevos sistemas de producción reconfigurables, flexibles o ágiles en la era de la industria 4.0; gestión de operaciones en fabricación bajo pedido; gestión de la producción en las cadenas de suministro de alimentos; diseño de sistemas de servicios gastronómicos; gestión del ciclo de vida de productos y activos en la economía circular; y estrategias de aumento de la producción del producto. Nota de contenido: Advanced Modelling, Simulation and Data Analytics in Production and Supply Networks -- A Robust Multi-Commodity Rebalancing Process in Humanitarian Logistics -- Towards a unified reliability-centered information logistics model for production assets -- Characterization of energy consumers in production systems with renewable on-site power generation -- A simulation model supporting the production optimization for high-precision machines assembly -- Agent-Based Modeling and Analysis of Dynamic Slab Yard Management in a Steel Factory -- A Simulation Analysis of Part Feeding to Assembly Stations with Vertical Robotic Storage and Retrieval -- Process Mining in Manufacturing: Goals, Techniques and Applications -- Bayesian Modelling for Product Testing and Release -- Advanced, Digital and Smart Manufacturing -- The Use of Organizational Innovation Concepts in Manufacturing Companies -- Systems Engineering Approach to Identify Requirements for Digital Twins Development -- Manufacturing Operations Management for Smart Manufacturing – A Case Study -- Industry 4.0 on demand: a value driven methodology to implement Industry 4.0 -- Gamification of Operational Tasks in Manufacturing - A Literature Review -- Technology Adoption in the Industry 4.0 Era: Empirical Evidence from Manufacturing Companies -- Towards the definition of an Impact Level factor of SME features over Digital Transformation -- Industry 4.0: maturity of automotive companies in Brazil for the digitization of processes -- General readiness assessment of Industry 4.0: Evidence from Serbian manufacturing industry -- Digital and Virtual Quality Management Systems -- Assembly issue resolution system using machine learning in aero engine manufacturing -- Introduction to Material Feeding 4.0: strategic, tactical, and operational impact -- Cloud-Manufacturing -- Cycle Time Estimation Model for Hybrid Assembly Stations based on Digital Twin Concept -- Cyber-Physical Production Systems and Digital Twins -- Digital Shadows as an enabler for the internet of production -- The transformation towards smart(er) factories: integration requirements of the digital twin -- IIOT Interoperability -- Towards inter-operable enterprise systems – graph-based validation of a context-driven approach for message profiling -- Supply Chain Planning and Optimization -- Software-based Assistance System for Decision Support on Supply Chain Level -- Integration of triple sustainable management by considering multi-period supply chain for next-generation fuel -- Potential benefits of Reverse Blending in the fertilizer industry -- Effectiveness of Vendor Managed Inventory [VMI] in Explosive Inventory Management -- Value chain integration – a framework for assessment -- A dynamic hybrid Berth Allocation Problem with routing constraints in bulk ports -- Blockchain-based secured collaborative model for supply chain resource sharing and visibility -- Gripper types and components in robotic bin picking -- A stochastic model for a two-level disassembly lot-sizing problem under random lead time -- Digital and Smart Supply Chain Management -- ERP in Industry 4.0 Context -- Identifying the opportunities for enhancing the digital readiness level of the supply chain -- Intelligent Logistics Networks Management -- The Role of Last-Mile Delivery in the Future of E-commerce -- Production-storage and transport integratedplanning for a multi-site mining industry -- Artificial Intelligence and Blockchain Technologies in Logistics and DSN -- Evaluating a Blockchain-based supply chain purchasing process through simulation -- Questionnaire model for paraconsistent quality assessment of software developed in Sales Force -- Novel Production Planning & Control Approaches -- Supporting the Decision of the Order Processing Strategy by using Logistic Models: A Case Study -- Order acceptance and scheduling with a throughput diagram -- Machine Learning and Artificial Intelligence -- Machine Learning-Supported Planning of Lead Times in Job Shop Manufacturing -- Connected, Smart Factories of the Future -- Identifying Key Business Processes that Can Benefit from Industry 4.0 in the Gas Sector, The Public Gas Distribution Networks Case in Greece -- The impact of Industry 4.0 connectivity on the collaboration along Brazilian automotive supply chain -- Manufacturing Systems Engineering: Agile, Flexible, Reconfigurable -- Towards a reference model for configuration of reconfigurable manufacturing system (RMS) -- Automatic Design of Dispatching Rules with Genetic Programming for Dynamic Job Shop Scheduling -- A Literature review on the Level of Automation and new approach proposal -- De-risking investments in industrial systems using Real Options Analysis: Case of chemical industry -- Data-driven Replenishment Method Choice in a Picking System -- Business Process Management for Manufacturing Execution System deployment: some lessons from a bearings manufacturer experience -- An Application of a DSML in Industry 4.0 Production Processes -- Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing -- Reconfigurable Manufacturing: Lesson Learnt from the COVID-19 Outbreak -- Digital Assistance Systems: Augmented Reality and Virtual Reality -- Virtual and Augmented reality as a digital support to HR systems in production management -- Application of Virtual Reality Technologies for Achieving Energy Efficient Manufacturing: Literature Analysis and Findings -- Smart Products in Smart Manufacturing Systems: An Opportunity to Utilize AR? -- Evaluation of Augmented Reality in Industry -- Circular Products Design and Engineering -- Finding and Capturing Value in e-Waste for Refrigerators Manufacturers and Recyclers -- Circular, Green, Sustainable Manufacturing -- Sustainable Business Model Innovation in Furniture Supply Chain: A Case Study -- A basic study on scheduling method for electric power saving of production machine -- Sustainability in fabric chains and garments for a circular economy -- Planning environments of hospital laboratories: An exploratory study -- Knowledge and practices towards sustainability and circular economy transitions: A Norwegian manufacturing perspective -- A methodology to integrate sustainability evaluations into vendor rating -- Environmental and Social Lifecycle Assessments -- Travel-Times Analysis and Passenger Transport Disutilities in Congested American Cities: Los Angeles, New York, Atlanta, Austin, and Chicago -- Socio-Cultural Aspects in Production Systems -- The interdependencies of Quality Management, Knowledge Management and Innovation Performance. A literature review -- Insights from a top-down lean subprogram deployment in a corporate group: The use of deployment tactics -- Tools for Evaluating Human Factor Aspects in Production and Logistics System -- Economy and its symbiosis with Circularity -- Data-driven Manufacturing and Services Operations Management -- First Steps to the Digital Shadow of Maintenance Services' Value Contribution -- Reshoring of service operations: evidence from a Delphi study -- Digital and physical testbed for production logistics operations -- Principles and Research Agenda for Sustainable, Data-Driven Food Production Planning and Control -- Product-Service Systems in DSN -- Agile guideline for development of smart services in manufacturing enterprises with support of artificial intelligence -- Collaborative Design and Engineering -- Framework for identifying gripper requirements for collaborative applications in manufacturing -- A novel value driven co-creation framework -- Autonomous mobile robots in hospital logistics -- Interorganizational learning in manufacturing industry. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 – September 3, 2020, Proceedings, Part I [documento electrónico] / Lalic, Bojan, ; Majstorovic, Vidosav, ; Marjanovic, Ugljesa, ; von Cieminski, Gregor, ; Romero, David, . - 1 ed. . - [s.l.] : Springer, 2020 . - XXXI, 692 p. 158 ilustraciones, 100 ilustraciones en color.
ISBN : 978-3-030-57993-7
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Ingenieria asistida por computadora Software de la aplicacion Ingeniería Informática Red de computadoras Inteligencia artificial Teoría de la codificación Teoría de la información Comercio electrónico Ingeniería y Diseño Asistidos por Computador (CAD CAE) Aplicaciones informáticas y de sistemas de información Ingeniería Informática y Redes Teoría de la codificación y la información comercio electrónico y negocios electrónicos Índice Dewey: 670.285 Resumen: El conjunto de dos volúmenes IFIP AICT 591 y 592 constituye las actas arbitradas de la Conferencia Internacional IFIP WG 5.7 sobre Avances en los Sistemas de Gestión de la Producción, APMS 2020, celebrada en Novi Sad, Serbia, en agosto/septiembre de 2020. Los 164 artículos presentados fueron cuidadosamente revisado y seleccionado entre 199 presentaciones. Discuten cuestiones apremiantes a nivel mundial en materia de fabricación inteligente, gestión de operaciones, gestión de la cadena de suministro e Industria 4.0. Los artículos están organizados en las siguientes secciones temáticas: Parte I: modelado avanzado, simulación y análisis de datos en redes de producción y suministro; fabricación avanzada, digital e inteligente; sistemas de gestión de calidad digitales y virtuales; fabricación en la nube; sistemas de producción ciberfísicos y gemelos digitales; interoperabilidad IIOT; planificación y optimización de la cadena de suministro; gestión de la cadena de suministro digital e inteligente; gestión de redes logísticas inteligentes; inteligencia artificial y tecnologías blockchain en logística y DSN; nuevos enfoques de planificación y control de la producción; aprendizaje automático e inteligencia artificial; fábricas inteligentes y conectadas del futuro; ingeniería de sistemas de fabricación: ágil, flexible, reconfigurable; sistemas de asistencia digital: realidad aumentada y realidad virtual; diseño e ingeniería de productos circulares; fabricación circular, verde y sostenible; evaluaciones del ciclo de vida ambiental y social; aspectos socioculturales en los sistemas de producción; gestión de operaciones de servicios y fabricación basada en datos; sistemas producto-servicio en DSN; y diseño e ingeniería colaborativos Parte II: el Operador 4.0: nuevos caminos evolutivos físicos y cognitivos; enfoques de transformación digital en la gestión de la producción; transformación digital para cadenas de suministro más sostenibles; aplicaciones basadas en datos en sistemas de logística y fabricación inteligentes; servicios basados en datos: características, tendencias y aplicaciones; el futuro del pensamiento y la práctica lean; manufactura esbelta digital y sus prácticas emergentes; nuevos sistemas de producción reconfigurables, flexibles o ágiles en la era de la industria 4.0; gestión de operaciones en fabricación bajo pedido; gestión de la producción en las cadenas de suministro de alimentos; diseño de sistemas de servicios gastronómicos; gestión del ciclo de vida de productos y activos en la economía circular; y estrategias de aumento de la producción del producto. Nota de contenido: Advanced Modelling, Simulation and Data Analytics in Production and Supply Networks -- A Robust Multi-Commodity Rebalancing Process in Humanitarian Logistics -- Towards a unified reliability-centered information logistics model for production assets -- Characterization of energy consumers in production systems with renewable on-site power generation -- A simulation model supporting the production optimization for high-precision machines assembly -- Agent-Based Modeling and Analysis of Dynamic Slab Yard Management in a Steel Factory -- A Simulation Analysis of Part Feeding to Assembly Stations with Vertical Robotic Storage and Retrieval -- Process Mining in Manufacturing: Goals, Techniques and Applications -- Bayesian Modelling for Product Testing and Release -- Advanced, Digital and Smart Manufacturing -- The Use of Organizational Innovation Concepts in Manufacturing Companies -- Systems Engineering Approach to Identify Requirements for Digital Twins Development -- Manufacturing Operations Management for Smart Manufacturing – A Case Study -- Industry 4.0 on demand: a value driven methodology to implement Industry 4.0 -- Gamification of Operational Tasks in Manufacturing - A Literature Review -- Technology Adoption in the Industry 4.0 Era: Empirical Evidence from Manufacturing Companies -- Towards the definition of an Impact Level factor of SME features over Digital Transformation -- Industry 4.0: maturity of automotive companies in Brazil for the digitization of processes -- General readiness assessment of Industry 4.0: Evidence from Serbian manufacturing industry -- Digital and Virtual Quality Management Systems -- Assembly issue resolution system using machine learning in aero engine manufacturing -- Introduction to Material Feeding 4.0: strategic, tactical, and operational impact -- Cloud-Manufacturing -- Cycle Time Estimation Model for Hybrid Assembly Stations based on Digital Twin Concept -- Cyber-Physical Production Systems and Digital Twins -- Digital Shadows as an enabler for the internet of production -- The transformation towards smart(er) factories: integration requirements of the digital twin -- IIOT Interoperability -- Towards inter-operable enterprise systems – graph-based validation of a context-driven approach for message profiling -- Supply Chain Planning and Optimization -- Software-based Assistance System for Decision Support on Supply Chain Level -- Integration of triple sustainable management by considering multi-period supply chain for next-generation fuel -- Potential benefits of Reverse Blending in the fertilizer industry -- Effectiveness of Vendor Managed Inventory [VMI] in Explosive Inventory Management -- Value chain integration – a framework for assessment -- A dynamic hybrid Berth Allocation Problem with routing constraints in bulk ports -- Blockchain-based secured collaborative model for supply chain resource sharing and visibility -- Gripper types and components in robotic bin picking -- A stochastic model for a two-level disassembly lot-sizing problem under random lead time -- Digital and Smart Supply Chain Management -- ERP in Industry 4.0 Context -- Identifying the opportunities for enhancing the digital readiness level of the supply chain -- Intelligent Logistics Networks Management -- The Role of Last-Mile Delivery in the Future of E-commerce -- Production-storage and transport integratedplanning for a multi-site mining industry -- Artificial Intelligence and Blockchain Technologies in Logistics and DSN -- Evaluating a Blockchain-based supply chain purchasing process through simulation -- Questionnaire model for paraconsistent quality assessment of software developed in Sales Force -- Novel Production Planning & Control Approaches -- Supporting the Decision of the Order Processing Strategy by using Logistic Models: A Case Study -- Order acceptance and scheduling with a throughput diagram -- Machine Learning and Artificial Intelligence -- Machine Learning-Supported Planning of Lead Times in Job Shop Manufacturing -- Connected, Smart Factories of the Future -- Identifying Key Business Processes that Can Benefit from Industry 4.0 in the Gas Sector, The Public Gas Distribution Networks Case in Greece -- The impact of Industry 4.0 connectivity on the collaboration along Brazilian automotive supply chain -- Manufacturing Systems Engineering: Agile, Flexible, Reconfigurable -- Towards a reference model for configuration of reconfigurable manufacturing system (RMS) -- Automatic Design of Dispatching Rules with Genetic Programming for Dynamic Job Shop Scheduling -- A Literature review on the Level of Automation and new approach proposal -- De-risking investments in industrial systems using Real Options Analysis: Case of chemical industry -- Data-driven Replenishment Method Choice in a Picking System -- Business Process Management for Manufacturing Execution System deployment: some lessons from a bearings manufacturer experience -- An Application of a DSML in Industry 4.0 Production Processes -- Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing -- Reconfigurable Manufacturing: Lesson Learnt from the COVID-19 Outbreak -- Digital Assistance Systems: Augmented Reality and Virtual Reality -- Virtual and Augmented reality as a digital support to HR systems in production management -- Application of Virtual Reality Technologies for Achieving Energy Efficient Manufacturing: Literature Analysis and Findings -- Smart Products in Smart Manufacturing Systems: An Opportunity to Utilize AR? -- Evaluation of Augmented Reality in Industry -- Circular Products Design and Engineering -- Finding and Capturing Value in e-Waste for Refrigerators Manufacturers and Recyclers -- Circular, Green, Sustainable Manufacturing -- Sustainable Business Model Innovation in Furniture Supply Chain: A Case Study -- A basic study on scheduling method for electric power saving of production machine -- Sustainability in fabric chains and garments for a circular economy -- Planning environments of hospital laboratories: An exploratory study -- Knowledge and practices towards sustainability and circular economy transitions: A Norwegian manufacturing perspective -- A methodology to integrate sustainability evaluations into vendor rating -- Environmental and Social Lifecycle Assessments -- Travel-Times Analysis and Passenger Transport Disutilities in Congested American Cities: Los Angeles, New York, Atlanta, Austin, and Chicago -- Socio-Cultural Aspects in Production Systems -- The interdependencies of Quality Management, Knowledge Management and Innovation Performance. A literature review -- Insights from a top-down lean subprogram deployment in a corporate group: The use of deployment tactics -- Tools for Evaluating Human Factor Aspects in Production and Logistics System -- Economy and its symbiosis with Circularity -- Data-driven Manufacturing and Services Operations Management -- First Steps to the Digital Shadow of Maintenance Services' Value Contribution -- Reshoring of service operations: evidence from a Delphi study -- Digital and physical testbed for production logistics operations -- Principles and Research Agenda for Sustainable, Data-Driven Food Production Planning and Control -- Product-Service Systems in DSN -- Agile guideline for development of smart services in manufacturing enterprises with support of artificial intelligence -- Collaborative Design and Engineering -- Framework for identifying gripper requirements for collaborative applications in manufacturing -- A novel value driven co-creation framework -- Autonomous mobile robots in hospital logistics -- Interorganizational learning in manufacturing industry. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i
Título : IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 – September 3, 2020, Proceedings, Part II Tipo de documento: documento electrónico Autores: Lalic, Bojan, ; Majstorovic, Vidosav, ; Marjanovic, Ugljesa, ; von Cieminski, Gregor, ; Romero, David, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2020 Número de páginas: XXXI, 772 p. 222 ilustraciones, 132 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-57997-5 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Ingenieria asistida por computadora Software de la aplicacion Ingeniería Informática Red de computadoras Inteligencia artificial Teoría de la codificación Teoría de la información Comercio electrónico Ingeniería y Diseño Asistidos por Computador (CAD CAE) Aplicaciones informáticas y de sistemas de información Ingeniería Informática y Redes Teoría de la codificación y la información comercio electrónico y negocios electrónicos Índice Dewey: 670.285 Resumen: El conjunto de dos volúmenes IFIP AICT 591 y 592 constituye las actas arbitradas de la Conferencia Internacional IFIP WG 5.7 sobre Avances en los Sistemas de Gestión de la Producción, APMS 2020, celebrada en Novi Sad, Serbia, en agosto/septiembre de 2020. Los 164 artículos presentados fueron cuidadosamente revisado y seleccionado entre 199 presentaciones. Discuten cuestiones apremiantes a nivel mundial en materia de fabricación inteligente, gestión de operaciones, gestión de la cadena de suministro e Industria 4.0. Los artículos están organizados en las siguientes secciones temáticas: Parte I: modelado avanzado, simulación y análisis de datos en redes de producción y suministro; fabricación avanzada, digital e inteligente; sistemas de gestión de calidad digitales y virtuales; fabricación en la nube; sistemas de producción ciberfísicos y gemelos digitales; interoperabilidad IIOT; planificación y optimización de la cadena de suministro; gestión de la cadena de suministro digital e inteligente; gestión de redes logísticas inteligentes; inteligencia artificial y tecnologías blockchain en logística y DSN; enfoques novedosos de planificación y control de la producción; aprendizaje automático e inteligencia artificial; fábricas inteligentes y conectadas del futuro; ingeniería de sistemas de fabricación: ágil, flexible, reconfigurable; sistemas de asistencia digital: realidad aumentada y realidad virtual; diseño e ingeniería de productos circulares; fabricación circular, verde y sostenible; evaluaciones del ciclo de vida ambiental y social; aspectos socioculturales en los sistemas de producción; gestión de operaciones de servicios y fabricación basada en datos; sistemas producto-servicio en DSN; y diseño e ingeniería colaborativos Parte II: el Operador 4.0: nuevos caminos evolutivos físicos y cognitivos; enfoques de transformación digital en la gestión de la producción; transformación digital para cadenas de suministro más sostenibles; aplicaciones basadas en datos en sistemas de logística y fabricación inteligentes; servicios basados en datos: características, tendencias y aplicaciones; el futuro del pensamiento y la práctica lean; manufactura esbelta digital y sus prácticas emergentes; nuevos sistemas de producción reconfigurables, flexibles o ágiles en la era de la industria 4.0; gestión de operaciones en fabricación bajo pedido; gestión de la producción en las cadenas de suministro de alimentos; diseño de sistemas de servicios gastronómicos; gestión del ciclo de vida de productos y activos en la economía circular; y estrategias de aumento de la producción del producto. Nota de contenido: The Operator 4.0: New Physical and Cognitive Evolutionary Paths -- Facilitating Operator Participation in Continuous Improvement: An Investigation of Organizational Factors -- Improving the Safety of Using Didactic Setups by Augmented Reality -- Production Management as-a-Service: A Softbot Approach -- Knowledge Strategies for Organisation 4.0 -- Challenges for the Operator 3.0 Addressed Through the Enabling Technologies of the Operator 4.0 -- Agent- and Skill-based Process Interoperability for Socio-Technical Production Systems-of-Systems -- Digital Transformation Approaches in Production Management -- Challenges in Data Life Cycle Management for Sustainable Cyber-Physical Production Systems -- Explainable AI in Manufacturing: A Predictive Maintenance Case Study -- Retrofit Concept for Textile Production -- Organizational enablers for digitalization in manufacturing industry -- Concept of PLM application integration with VR and AR techniques -- The big potential of Big Data in manufacturing: evidence from emerging economies -- A conceptual model for deploying digitalization in SMEs through capability building -- The Potential of Game Development Platforms for Digital Twins and Virtual Labs: Case Study of an Energy -- The Application of ICT Software Solutions in Manufacturing Sector in Serbia -- Achieving Business Model Innovation with the Personalized Product Business Model Radar Template -- Integrating electronic components into 3D printed parts to develop a digital manufacturing approach -- Digital transformation and its potential effects on future management: Insights from an ETO context -- Applying contextualization for data-driven transformation in manufacturing -- Digital Transformation for more Sustainable Supply Chains -- Smart contract-based blockchain solution to reduce supply chain risks -- Towards sustainability: The manufacturers' perspective -- Data-Driven Applications in Smart Manufacturing and Logistics Systems -- Smart Factory Competitiveness based on real time Monitoring and Quality predictive model applied to multi-stages Production lines -- A New Application of Coordination Contracts for Supplier Selection in a Cloud Environment -- Workforce Assignment with a Different Skill Level for Automotive Parts Assembly Lines -- A framework of data-driven dynamic optimisation for smart production logistics -- Decentralized Industrial IoT Data Management Based on Blockchain and IPFS -- Integrated Platform and Digital Twin Application for Global Automotive Part Suppliers -- Analyzing the Characteristics of Digital Twin and Discrete Event Simulation in Cyber Physical Systems -- Streaming Analytics in Edge-Cloud Environment for Logistics Processes -- An Improvement in Master Surgical Scheduling using Artificial Neural Network and Fuzzy Programming -- SKOS Tool: A Tool for Creating Knowledge Graphs to Support Semantic Text Classification -- Data-Driven Services: Characteristics, Trends and Applications -- The successful commercialization ofa digital twin in an industrial product service system -- Using Service Dominant logic to assess the value co-creation of Smart Services -- Engineering of data-driven Service Systems for Smart Living: Application and Challenges -- The role of service business models in the manufacturing of transition economies -- System architecture analysis with network index in MBSE approach -Application to smart interactive service with digital health modeling -- The Data-Driven Product-Service Systems Design and Delivery (4DPSS) methodology -- Data-driven maintenance delivery framework: test in an Italian company -- Towards a Comparative Data Value Assessment Framework for Smart Product Service Systems -- Impact of platform openness on ecosystems and value streams in Platform-based PSS exemplified using RAMI 4.0 -- Industry 4.0 data-related technologies and servitization: a systematic literature review -- A framework to support value co-creation in PSS development -- The Future of Lean Thinking and Practice -- Utilizing Lean Thinking as a Means to Digital Transformation in Service Organizations -- On the Need of Functional Priority and Failure Risk Assessment to Optimize Human Resource Allocation in Public Service Organizations -- Assessing the Value of Process Improvement Suggestions -- On the Necessity for Identifying Waste in Knowledge Work Dominated Projects: A Case Study from Oil and Gas-Related Product Development Projects -- Lean Thinking: from the shop floor to an organizational culture -- Digital Lean Manufacturing and its Emerging Practices -- A Learning Roadmap for Digital Lean Manufacturing -- Investigating the Challenges and Opportunities for Production Planning and Control in Digital Lean Manufacturing -- New Forms of Gemba Walks and their Digital Tools in the Digital Lean Manufacturing World -- New Reconfigurable, Flexible or Agile Production Systems in the Era of Industry 4.0 -- A computational method for identifying the optimum buffer size in the era of Zero Defect Manufacturing -- A Bi-objective Scheduling Model for Additive Manufacturing with Multiple Materials and Sequence-dependent Setup Time -- Dynamic Distributed Job-Shop Scheduling Problem Consisting of Reconfigurable Machine Tools -- Towards a Non-Disruptive System for Dynamic Orchestration of the Shop Floor -- Assembly process design: performance evaluation under ergonomics consideration using several robot collaboration modes -- A Method of Distributed Production Management for Highly-Distributed Flexible Job Shops -- A Digital Twin modular framework for Reconfigurable Manufacturing Systems -- Reconfigurable Digitalized and Servitized Production Systems: Requirements and Challenges -- The impact of dynamic tasks assignment in paced mixed-model assembly line with moving workers -- Balancing and configuration planning of RMS to minimize energy cost -- Operations Management in Engineer-to-Order Manufacturing -- Factors affecting shipyard operations and logistics: A framework and comparison of shipbuilding approaches -- Using the Smartphone as an Augmented Reality Device in ETO Industry -- Exploring the Path Towards Construction 4.0: Collaborative Networks & Enterprise Architecture Views -- The Potential for Purchasing function to Enhance Circular Economy Business Models for ETO production -- Planning procurement activities in ETO projects -- Maturity model for successful cost transformation in ETO companies -- Backlog Oriented Bottleneck Management – Practical Guide for Production Managers -- Cross-functional coordination before and after the CODP: an empirical study in the machinery industry -- Production Management in Food Supply Chains -- Food Bank: A Proposal for Short Agri-Food Chains -- The New Frontiers in World Soybean Production: An Analysis of Savanna in Piaui, Brazil -- Prediction of cold chain transport conditions using data mining -- Environmental impact classification of perishable on-road transport using data mining -- Economic and Environmental Perfomance in Coffee Supply Chains: A Brazilian Case Study -- Managing Perishable Multi-Product Inventory with Supplier Fill-Rate, Price Reduction and Substitution -- Digital Technology Enablers for Resilient and Customer Driven Food Value Chains -- Gastronomic Service System Design -- Human–Robot Hybrid Service System Introduction for Enhancing Labor and Robot Productivity -- Forecasting Customers Visiting using Machine Learning and Characteristics Analysis with Low Forecasting Accuracy Days -- A study on menu planning method for managed meal -Consideration of the cost of ordering ingredients -- Service system design considering employee satisfaction -- Product and Asset Life Cycle Management in the Circular Economy -- Exploring synergies between Circular Economy and Asset Management -- Information flows supporting Circular Economy adoption in the manufacturing sector -- A conceptual model of the IT ecosystem for Asset Management in the global manufacturing context -- Production Ramp-up Strategies for Product -- Part Selection for Freeform Injection Molding: framework for development of a unique methodology -- A Model for Cost-Benefit Analysis of Production Ramp-up Strategies -- Key factors on utilizing the production system design phase for increasing operational performance -- Business Model Development for a Dynamic Production Network Platform -- Changeable Closed-Loop Manufacturing Systems: A Case Study of Challenges in Product Take-Back. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 – September 3, 2020, Proceedings, Part II [documento electrónico] / Lalic, Bojan, ; Majstorovic, Vidosav, ; Marjanovic, Ugljesa, ; von Cieminski, Gregor, ; Romero, David, . - 1 ed. . - [s.l.] : Springer, 2020 . - XXXI, 772 p. 222 ilustraciones, 132 ilustraciones en color.
ISBN : 978-3-030-57997-5
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Ingenieria asistida por computadora Software de la aplicacion Ingeniería Informática Red de computadoras Inteligencia artificial Teoría de la codificación Teoría de la información Comercio electrónico Ingeniería y Diseño Asistidos por Computador (CAD CAE) Aplicaciones informáticas y de sistemas de información Ingeniería Informática y Redes Teoría de la codificación y la información comercio electrónico y negocios electrónicos Índice Dewey: 670.285 Resumen: El conjunto de dos volúmenes IFIP AICT 591 y 592 constituye las actas arbitradas de la Conferencia Internacional IFIP WG 5.7 sobre Avances en los Sistemas de Gestión de la Producción, APMS 2020, celebrada en Novi Sad, Serbia, en agosto/septiembre de 2020. Los 164 artículos presentados fueron cuidadosamente revisado y seleccionado entre 199 presentaciones. Discuten cuestiones apremiantes a nivel mundial en materia de fabricación inteligente, gestión de operaciones, gestión de la cadena de suministro e Industria 4.0. Los artículos están organizados en las siguientes secciones temáticas: Parte I: modelado avanzado, simulación y análisis de datos en redes de producción y suministro; fabricación avanzada, digital e inteligente; sistemas de gestión de calidad digitales y virtuales; fabricación en la nube; sistemas de producción ciberfísicos y gemelos digitales; interoperabilidad IIOT; planificación y optimización de la cadena de suministro; gestión de la cadena de suministro digital e inteligente; gestión de redes logísticas inteligentes; inteligencia artificial y tecnologías blockchain en logística y DSN; enfoques novedosos de planificación y control de la producción; aprendizaje automático e inteligencia artificial; fábricas inteligentes y conectadas del futuro; ingeniería de sistemas de fabricación: ágil, flexible, reconfigurable; sistemas de asistencia digital: realidad aumentada y realidad virtual; diseño e ingeniería de productos circulares; fabricación circular, verde y sostenible; evaluaciones del ciclo de vida ambiental y social; aspectos socioculturales en los sistemas de producción; gestión de operaciones de servicios y fabricación basada en datos; sistemas producto-servicio en DSN; y diseño e ingeniería colaborativos Parte II: el Operador 4.0: nuevos caminos evolutivos físicos y cognitivos; enfoques de transformación digital en la gestión de la producción; transformación digital para cadenas de suministro más sostenibles; aplicaciones basadas en datos en sistemas de logística y fabricación inteligentes; servicios basados en datos: características, tendencias y aplicaciones; el futuro del pensamiento y la práctica lean; manufactura esbelta digital y sus prácticas emergentes; nuevos sistemas de producción reconfigurables, flexibles o ágiles en la era de la industria 4.0; gestión de operaciones en fabricación bajo pedido; gestión de la producción en las cadenas de suministro de alimentos; diseño de sistemas de servicios gastronómicos; gestión del ciclo de vida de productos y activos en la economía circular; y estrategias de aumento de la producción del producto. Nota de contenido: The Operator 4.0: New Physical and Cognitive Evolutionary Paths -- Facilitating Operator Participation in Continuous Improvement: An Investigation of Organizational Factors -- Improving the Safety of Using Didactic Setups by Augmented Reality -- Production Management as-a-Service: A Softbot Approach -- Knowledge Strategies for Organisation 4.0 -- Challenges for the Operator 3.0 Addressed Through the Enabling Technologies of the Operator 4.0 -- Agent- and Skill-based Process Interoperability for Socio-Technical Production Systems-of-Systems -- Digital Transformation Approaches in Production Management -- Challenges in Data Life Cycle Management for Sustainable Cyber-Physical Production Systems -- Explainable AI in Manufacturing: A Predictive Maintenance Case Study -- Retrofit Concept for Textile Production -- Organizational enablers for digitalization in manufacturing industry -- Concept of PLM application integration with VR and AR techniques -- The big potential of Big Data in manufacturing: evidence from emerging economies -- A conceptual model for deploying digitalization in SMEs through capability building -- The Potential of Game Development Platforms for Digital Twins and Virtual Labs: Case Study of an Energy -- The Application of ICT Software Solutions in Manufacturing Sector in Serbia -- Achieving Business Model Innovation with the Personalized Product Business Model Radar Template -- Integrating electronic components into 3D printed parts to develop a digital manufacturing approach -- Digital transformation and its potential effects on future management: Insights from an ETO context -- Applying contextualization for data-driven transformation in manufacturing -- Digital Transformation for more Sustainable Supply Chains -- Smart contract-based blockchain solution to reduce supply chain risks -- Towards sustainability: The manufacturers' perspective -- Data-Driven Applications in Smart Manufacturing and Logistics Systems -- Smart Factory Competitiveness based on real time Monitoring and Quality predictive model applied to multi-stages Production lines -- A New Application of Coordination Contracts for Supplier Selection in a Cloud Environment -- Workforce Assignment with a Different Skill Level for Automotive Parts Assembly Lines -- A framework of data-driven dynamic optimisation for smart production logistics -- Decentralized Industrial IoT Data Management Based on Blockchain and IPFS -- Integrated Platform and Digital Twin Application for Global Automotive Part Suppliers -- Analyzing the Characteristics of Digital Twin and Discrete Event Simulation in Cyber Physical Systems -- Streaming Analytics in Edge-Cloud Environment for Logistics Processes -- An Improvement in Master Surgical Scheduling using Artificial Neural Network and Fuzzy Programming -- SKOS Tool: A Tool for Creating Knowledge Graphs to Support Semantic Text Classification -- Data-Driven Services: Characteristics, Trends and Applications -- The successful commercialization ofa digital twin in an industrial product service system -- Using Service Dominant logic to assess the value co-creation of Smart Services -- Engineering of data-driven Service Systems for Smart Living: Application and Challenges -- The role of service business models in the manufacturing of transition economies -- System architecture analysis with network index in MBSE approach -Application to smart interactive service with digital health modeling -- The Data-Driven Product-Service Systems Design and Delivery (4DPSS) methodology -- Data-driven maintenance delivery framework: test in an Italian company -- Towards a Comparative Data Value Assessment Framework for Smart Product Service Systems -- Impact of platform openness on ecosystems and value streams in Platform-based PSS exemplified using RAMI 4.0 -- Industry 4.0 data-related technologies and servitization: a systematic literature review -- A framework to support value co-creation in PSS development -- The Future of Lean Thinking and Practice -- Utilizing Lean Thinking as a Means to Digital Transformation in Service Organizations -- On the Need of Functional Priority and Failure Risk Assessment to Optimize Human Resource Allocation in Public Service Organizations -- Assessing the Value of Process Improvement Suggestions -- On the Necessity for Identifying Waste in Knowledge Work Dominated Projects: A Case Study from Oil and Gas-Related Product Development Projects -- Lean Thinking: from the shop floor to an organizational culture -- Digital Lean Manufacturing and its Emerging Practices -- A Learning Roadmap for Digital Lean Manufacturing -- Investigating the Challenges and Opportunities for Production Planning and Control in Digital Lean Manufacturing -- New Forms of Gemba Walks and their Digital Tools in the Digital Lean Manufacturing World -- New Reconfigurable, Flexible or Agile Production Systems in the Era of Industry 4.0 -- A computational method for identifying the optimum buffer size in the era of Zero Defect Manufacturing -- A Bi-objective Scheduling Model for Additive Manufacturing with Multiple Materials and Sequence-dependent Setup Time -- Dynamic Distributed Job-Shop Scheduling Problem Consisting of Reconfigurable Machine Tools -- Towards a Non-Disruptive System for Dynamic Orchestration of the Shop Floor -- Assembly process design: performance evaluation under ergonomics consideration using several robot collaboration modes -- A Method of Distributed Production Management for Highly-Distributed Flexible Job Shops -- A Digital Twin modular framework for Reconfigurable Manufacturing Systems -- Reconfigurable Digitalized and Servitized Production Systems: Requirements and Challenges -- The impact of dynamic tasks assignment in paced mixed-model assembly line with moving workers -- Balancing and configuration planning of RMS to minimize energy cost -- Operations Management in Engineer-to-Order Manufacturing -- Factors affecting shipyard operations and logistics: A framework and comparison of shipbuilding approaches -- Using the Smartphone as an Augmented Reality Device in ETO Industry -- Exploring the Path Towards Construction 4.0: Collaborative Networks & Enterprise Architecture Views -- The Potential for Purchasing function to Enhance Circular Economy Business Models for ETO production -- Planning procurement activities in ETO projects -- Maturity model for successful cost transformation in ETO companies -- Backlog Oriented Bottleneck Management – Practical Guide for Production Managers -- Cross-functional coordination before and after the CODP: an empirical study in the machinery industry -- Production Management in Food Supply Chains -- Food Bank: A Proposal for Short Agri-Food Chains -- The New Frontiers in World Soybean Production: An Analysis of Savanna in Piaui, Brazil -- Prediction of cold chain transport conditions using data mining -- Environmental impact classification of perishable on-road transport using data mining -- Economic and Environmental Perfomance in Coffee Supply Chains: A Brazilian Case Study -- Managing Perishable Multi-Product Inventory with Supplier Fill-Rate, Price Reduction and Substitution -- Digital Technology Enablers for Resilient and Customer Driven Food Value Chains -- Gastronomic Service System Design -- Human–Robot Hybrid Service System Introduction for Enhancing Labor and Robot Productivity -- Forecasting Customers Visiting using Machine Learning and Characteristics Analysis with Low Forecasting Accuracy Days -- A study on menu planning method for managed meal -Consideration of the cost of ordering ingredients -- Service system design considering employee satisfaction -- Product and Asset Life Cycle Management in the Circular Economy -- Exploring synergies between Circular Economy and Asset Management -- Information flows supporting Circular Economy adoption in the manufacturing sector -- A conceptual model of the IT ecosystem for Asset Management in the global manufacturing context -- Production Ramp-up Strategies for Product -- Part Selection for Freeform Injection Molding: framework for development of a unique methodology -- A Model for Cost-Benefit Analysis of Production Ramp-up Strategies -- Key factors on utilizing the production system design phase for increasing operational performance -- Business Model Development for a Dynamic Production Network Platform -- Changeable Closed-Loop Manufacturing Systems: A Case Study of Challenges in Product Take-Back. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i
Título : Proceedings on 25th International Joint Conference on Industrial Engineering and Operations Management – IJCIEOM : The Next Generation of Production and Service Systems Tipo de documento: documento electrónico Autores: Anisic, Zoran, ; Lalic, Bojan, ; Gracanin, Danijela, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2020 Número de páginas: XII, 535 p. 126 ilustraciones, 88 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-43616-2 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Artículos Gestión industrial Aprendizaje automático Máquinas Herramientas Procesos Índice Dewey: 670 Manufactura Resumen: Este libro presenta las actas de la 25ª edición de la Conferencia Conjunta Internacional sobre Ingeniería Industrial y Gestión de Operaciones. La conferencia está organizada por 6 instituciones (de diferentes países y continentes) que reúnen a un gran número de miembros en el campo de la gestión operativa, la ingeniería industrial y la gestión de la ingeniería. Esta edición de la conferencia tuvo como título: LA PRÓXIMA GENERACIÓN DE SISTEMAS DE PRODUCCIÓN Y SERVICIOS con el fin de enfatizar un futuro impredecible y muy cambiante. Esta conferencia tiene como objetivo mejorar la conexión entre la academia y la industria y reunir a investigadores y profesionales especializados en gestión de operaciones, ingeniería industrial, gestión de ingeniería y otras disciplinas relacionadas de todo el mundo. Nota de contenido: From the content: Increasing Resource Efficiency through Digitalization – Chances and Challenges for Manufacturing Industries -- A Review Content Analysis between Industry 4.0 and Sustainable Manufacturing -- Title Blood Inventory Management System: Reducing Wastage and Shortage -- Perspectives for IoT-Based Integration of Distributed and Automated Manufacturing Lines for Mass Customization -- Stochastic Liquidity Model and Its Applications to Portfolio Selection -- Career Expectations of Generation Z -- Group Technology: Hybrid Genetic Algorithm with Greedy Formation and a Local Search Cluster Technique in the Solution of Manufacturing Cell Formation Problems -- Hospital Operations Management: An Exploratory Study from Brazil and Portugal -- The Relationship of Continuous Improvement Practice with Service Operations Competitiveness in Healthcare -- Data Analysis for Prediction of Forest Fires. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i Proceedings on 25th International Joint Conference on Industrial Engineering and Operations Management – IJCIEOM : The Next Generation of Production and Service Systems [documento electrónico] / Anisic, Zoran, ; Lalic, Bojan, ; Gracanin, Danijela, . - 1 ed. . - [s.l.] : Springer, 2020 . - XII, 535 p. 126 ilustraciones, 88 ilustraciones en color.
ISBN : 978-3-030-43616-2
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Artículos Gestión industrial Aprendizaje automático Máquinas Herramientas Procesos Índice Dewey: 670 Manufactura Resumen: Este libro presenta las actas de la 25ª edición de la Conferencia Conjunta Internacional sobre Ingeniería Industrial y Gestión de Operaciones. La conferencia está organizada por 6 instituciones (de diferentes países y continentes) que reúnen a un gran número de miembros en el campo de la gestión operativa, la ingeniería industrial y la gestión de la ingeniería. Esta edición de la conferencia tuvo como título: LA PRÓXIMA GENERACIÓN DE SISTEMAS DE PRODUCCIÓN Y SERVICIOS con el fin de enfatizar un futuro impredecible y muy cambiante. Esta conferencia tiene como objetivo mejorar la conexión entre la academia y la industria y reunir a investigadores y profesionales especializados en gestión de operaciones, ingeniería industrial, gestión de ingeniería y otras disciplinas relacionadas de todo el mundo. Nota de contenido: From the content: Increasing Resource Efficiency through Digitalization – Chances and Challenges for Manufacturing Industries -- A Review Content Analysis between Industry 4.0 and Sustainable Manufacturing -- Title Blood Inventory Management System: Reducing Wastage and Shortage -- Perspectives for IoT-Based Integration of Distributed and Automated Manufacturing Lines for Mass Customization -- Stochastic Liquidity Model and Its Applications to Portfolio Selection -- Career Expectations of Generation Z -- Group Technology: Hybrid Genetic Algorithm with Greedy Formation and a Local Search Cluster Technique in the Solution of Manufacturing Cell Formation Problems -- Hospital Operations Management: An Exploratory Study from Brazil and Portugal -- The Relationship of Continuous Improvement Practice with Service Operations Competitiveness in Healthcare -- Data Analysis for Prediction of Forest Fires. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i
