Autor Kennedy, Mark William
|
|
Documentos disponibles escritos por este autor (3)
Hacer una sugerencia Refinar búsqueda8th International Symposium on High-Temperature Metallurgical Processing / Hwang, Jiann-Yang ; Jiang, Tao ; Kennedy, Mark William ; Yücel, Onuralp ; Pistorius, P. Chris ; Seshadri, Varadarajan ; Zhao, Baojun ; Gregurek, Dean ; Keskinkilic, Ender
Título : 8th International Symposium on High-Temperature Metallurgical Processing Tipo de documento: documento electrónico Autores: Hwang, Jiann-Yang, ; Jiang, Tao, ; Kennedy, Mark William, ; Yücel, Onuralp, ; Pistorius, P. Chris, ; Seshadri, Varadarajan, ; Zhao, Baojun, ; Gregurek, Dean, ; Keskinkilic, Ender, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2017 Número de páginas: XXII, 818 p. 421 ilustraciones ISBN/ISSN/DL: 978-3-319-51340-9 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Material Rieles Materiales Caracterización y Técnica Analítica Metales y aleaciones Ingeniería de Materiales Índice Dewey: 620.112 Resumen: Esta colección presenta contribuciones que cubren los avances y desarrollos de nuevas tecnologías metalúrgicas de alta temperatura y sus aplicaciones en las áreas de: procesamiento de minerales; extracción de metales; preparación de materiales metálicos, refractarios y cerámicos; tratamiento y reciclaje de escorias y residuos; Conservacion de energia; y protección del medio ambiente. El volumen tendrá un amplio impacto en los académicos y profesionales que prestan servicios en las industrias metalúrgicas de todo el mundo al brindarles una cobertura integral de una amplia variedad de temas. Nota de contenido: Part 1: Energy Efficient Clean Metallurgical Technology -- Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work -- Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture -- Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection -- Microwave-intensified Reduction of Biochar-containing Briquettes -- Refractory Challenges in Lead Recycling Furnaces -- Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix -- Part 2: Simulation of High Temperature Process -- A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor -- A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement -- Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process -- Analysis of Jet Behavior and Surface Fluctuations in the Meniscusof Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling -- CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting -- Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation -- Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag -- Part 3: Fundamental Research of Metallurgical Process -- Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels -- Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon -- Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags -- Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel -- Part 4: Alloys and Materials Preparation -- Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications -- Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating -- Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition -- Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves -- Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy -- Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel -- Part 5: Extraction and Recovery of Metals -- Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation -- Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method -- Direct-to-blister Copper Smelting with the ISASMELT™ Process -- Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction -- Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process -- Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating -- Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process -- Part 6: Ironmaking and Steelmaking -- Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process -- Formation Mechanisms of Inclusions in Spring Steels -- Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace -- Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel -- High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process -- Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace -- Part 7: Treatment and Recycling of Slag/Wastes -- Introduction of Matte Droplets in Copper Smelting Slag -- Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag -- Penetration Depth of Microwave in Tire Rubber -- Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags -- Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting -- Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag -- Part 8: Utilization of Complex Ores -- Evaluation of Molybdenum Concentrates -- Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process -- The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature -- Roasting of Celestite in Laboratory Scale Rotary Furnace -- The Experimental Study of CaCO3 in the Vanadium Extraction Process -- The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process -- Part 8: Poster I -- A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry -- A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method -- Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum -- Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process -- Effect of Inner Shape on Blast Furnace Performance for Iron Making -- Effect of Lance Configurations on Coal Flow and Combustion Characteristics -- Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag -- Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel -- High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms -- Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust -- Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace -- Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines -- Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag -- Two-step Copper Smelting Process at Dongying Fangyuan -- Part 9: Poster II -- Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln -- Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction -- Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting -- Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials -- Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace -- Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate -- Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process -- Influence of Hot Charge on Blast Furnace Performance for Iron Making -- Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace -- Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue -- Molecular Dynamics Study of the Structural Properties with Varying -- One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis -- Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore -- Research on the Flow Behavior of Molten Slag through Pore -- Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i 8th International Symposium on High-Temperature Metallurgical Processing [documento electrónico] / Hwang, Jiann-Yang, ; Jiang, Tao, ; Kennedy, Mark William, ; Yücel, Onuralp, ; Pistorius, P. Chris, ; Seshadri, Varadarajan, ; Zhao, Baojun, ; Gregurek, Dean, ; Keskinkilic, Ender, . - 1 ed. . - [s.l.] : Springer, 2017 . - XXII, 818 p. 421 ilustraciones.
ISBN : 978-3-319-51340-9
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Material Rieles Materiales Caracterización y Técnica Analítica Metales y aleaciones Ingeniería de Materiales Índice Dewey: 620.112 Resumen: Esta colección presenta contribuciones que cubren los avances y desarrollos de nuevas tecnologías metalúrgicas de alta temperatura y sus aplicaciones en las áreas de: procesamiento de minerales; extracción de metales; preparación de materiales metálicos, refractarios y cerámicos; tratamiento y reciclaje de escorias y residuos; Conservacion de energia; y protección del medio ambiente. El volumen tendrá un amplio impacto en los académicos y profesionales que prestan servicios en las industrias metalúrgicas de todo el mundo al brindarles una cobertura integral de una amplia variedad de temas. Nota de contenido: Part 1: Energy Efficient Clean Metallurgical Technology -- Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work -- Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture -- Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection -- Microwave-intensified Reduction of Biochar-containing Briquettes -- Refractory Challenges in Lead Recycling Furnaces -- Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix -- Part 2: Simulation of High Temperature Process -- A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor -- A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement -- Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process -- Analysis of Jet Behavior and Surface Fluctuations in the Meniscusof Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling -- CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting -- Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation -- Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag -- Part 3: Fundamental Research of Metallurgical Process -- Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels -- Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon -- Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags -- Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel -- Part 4: Alloys and Materials Preparation -- Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications -- Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating -- Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition -- Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves -- Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy -- Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel -- Part 5: Extraction and Recovery of Metals -- Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation -- Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method -- Direct-to-blister Copper Smelting with the ISASMELT™ Process -- Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction -- Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process -- Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating -- Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process -- Part 6: Ironmaking and Steelmaking -- Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process -- Formation Mechanisms of Inclusions in Spring Steels -- Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace -- Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel -- High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process -- Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace -- Part 7: Treatment and Recycling of Slag/Wastes -- Introduction of Matte Droplets in Copper Smelting Slag -- Dissolution Behavior of Fe from Glassy Oxide Phase in Steelmaking Slag -- Penetration Depth of Microwave in Tire Rubber -- Effect of TiO2 on Thermophysical Properties and Structure of P-bearing Steelmaking Slags -- Analysis for Optimum Conditions for Recovery of Valuable Metals from E-Waste through Black Copper Smelting -- Precipitation Behavior of MxTi3-xO5 in the Titanium-Bearing Electric Furnace Slag -- Part 8: Utilization of Complex Ores -- Evaluation of Molybdenum Concentrates -- Intensification of Gold Leaching from a Multi-refractory Gold Concentrate by the Two-stage Roasting-alkaline Sulfide Washing-cyanidation Process -- The Recovery of Cobalt from Copper Converter Slag by Reduction-sulfurization Smelting at High Temperature -- Roasting of Celestite in Laboratory Scale Rotary Furnace -- The Experimental Study of CaCO3 in the Vanadium Extraction Process -- The Extraction of Zinc from Zinc Ferrite by Calcified Roasting and Ammonia Leaching Process -- Part 8: Poster I -- A New Method to Detect the High Temperature Distribution in the Ironmaking and Steelmaking Industry -- A Study for Reconstructing the Three-dimensional Temperature Field of a Blast Furnace Raceway Based on Monte Carlo Method -- Behaviour of Silicon in Nickel Laterite by Carbothermic Reduction in Vacuum -- Effect of CaO Addition on the Behavior of Vanadium and Phosphorus during Oxidation and Leaching Process -- Effect of Inner Shape on Blast Furnace Performance for Iron Making -- Effect of Lance Configurations on Coal Flow and Combustion Characteristics -- Effect of Silicon on Removal of Phosphorus from High Phosphorus Si-Mn alloy by CaO-Based Slag -- Effect of Super Gravity on the Solidification Structure and C Segregation of High Carbon Steel -- High Temperature Distribution Measurement of the Blast Furnace Raceway through Imaging Techniques and Optimization Algorithms -- Kinetics and Reduction Behavior of Self-reducing Briquettes Containing Blast Furnace Dust -- Model Analysis of the Phenomena of Pulverized Coal Injection in Blast Furnace -- Sintering Performance of Blends Containing High Proportion of Limonite Iron Ore Fines -- Thermodynamics Study on Phosphorus Distribution between 2CaO•SiO2-3CaO•P2O5 Solid Solution and Liquid Slag -- Two-step Copper Smelting Process at Dongying Fangyuan -- Part 9: Poster II -- Comparison of the Ringing Characteristics between Acid and Alkaline Iron Ore Pellets Powder in Kiln -- Comprehensive Utilization of Ludwigite Iron Concentrate by Gas-based Direct Reduction -- Decarburization of Spent Petrochemical Catalysts via Microwave Oxidation Roasting -- Effect of FeO Content in Laterite Nickel Slag on the Corrosioin Behaviour of Refractory Materials -- Effects of Blowing Conditions on the Dispersion States of Materials Charged into Bottom Blown Oxygen Smelting Furnace -- Effects of Pre-oxidation and Additives on Carbothermic Reduction of Ilmenite Concentrate -- Influence of Converter Slag on Decomposition Behavior of Limestone during BOF Steelmaking Process -- Influence of Hot Charge on Blast Furnace Performance for Iron Making -- Investigation and Application of Evolution System of Stock Surface Gas Flow Distribution in Blast Furnace -- Investigation of the Carbothermic Reduction of Chromium-containing Vanadium Extraction Residue -- Molecular Dynamics Study of the Structural Properties with Varying -- One-step Extraction of Lead from Spent Lead-acid Battery Paste via Reductive Sulfur-fixing Smelting: Thermodynamic Analysis -- Removal of Cd(II) Ion from Aqueous Solution by Adsorption on Wasted Low Grade Phosphorus-containing Iron Ore -- Research on the Flow Behavior of Molten Slag through Pore -- Study on the Influence of Materials on Heat Transfer Characteristics of Blast Furnace Cooling Staves. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i
Título : 9th International Symposium on High-Temperature Metallurgical Processing Tipo de documento: documento electrónico Autores: Hwang, Jiann-Yang, ; Jiang, Tao, ; Kennedy, Mark William, ; Gregurek, Dean, ; Wang, Shijie, ; Zhao, Baojun, ; Yücel, Onuralp, ; Keskinkilic, Ender, ; Downey, Jerome P., ; Peng, Zhiwei, ; Padilla, Rafael, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2018 Número de páginas: XXIV, 887 p. 534 ilustraciones ISBN/ISSN/DL: 978-3-319-72138-5 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Material Rieles Materiales Caracterización y Técnica Analítica Metales y aleaciones Ingeniería de Materiales Índice Dewey: 620.112 Resumen: En los últimos años, las industrias metalúrgicas mundiales han experimentado un crecimiento rápido y próspero. La tecnología metalúrgica de alta temperatura es la columna vertebral para satisfacer las necesidades técnicas, ambientales y económicas del crecimiento. Esta colección presenta contribuciones que cubren los avances y desarrollos de nuevas tecnologías metalúrgicas de alta temperatura y sus aplicaciones en las áreas de procesamiento de minerales; extracción de metales; preparación de materiales metálicos, refractarios y cerámicos; tratamiento y reciclaje de escorias y residuos; y ahorro de energía y protección del medio ambiente. El volumen tendrá un amplio impacto en los académicos y profesionales que prestan servicios en las industrias metalúrgicas de todo el mundo. Nota de contenido: Part 1. Energy-efficient and Clean Metallurgical Technology -- Simplified Process for Making Anode Copper -- Techno-economic Analysis of Energy Recovery from Plastic Waste -- Development of Continuous Blast Furnace Slag Solidification Process for Coarse Aggregates -- An Innovative Oxygen-enriched Flash Smelting Technology for Lead Smelting and its Industrial Application -- Characteristics and Control Technology of Fine Particulate Matter (PM) of Iron Ore Sintering -- Sintering Bed Spraying Steam to Reduce NOx and Dioxin Emissions in Shougang -- Part 2. Simulation and Modeling of High Temperature Metallurgical Process -- Neural Prediction Model for Extraction of Germanium from Zinc Oxide Dust by Microwave Alkaline Roasting-Water Leaching -- Simulation of Velocity Field of Molten Steel in Electric Arc Furnace Steelmaking -- Thermodynamic Modelling of Magnesium, Calcium and Strontium-oxides Reduction Systems in Vacuum -- Metallization and Carburization Kinetics in DR Shaft Furnaces. The Metcarb Model -- CFD Modeling of Flow and Chemical Reactions in a Submerged Lance Copper Smelting Furnace -- Numerical Simulation of Ultrasound-Induced Cavitation Bubbling in a Calcium Ferrite Melt -- Part 3. Alloys and Materials Preparation -- Synthesis of Nanocrystalline Carbide Ceramics via Reduction of Anion-loaded Activated Carbon Precursors -- Production of Lithium-Ion Cathode Material for Automotive Batteries Using Melting Casting Process -- Part 4. Fundamental Research on High Temperature Metallurgical Processing -- Degradation Mechanisms of Refractories in a Bottom Blown Copper Smelting Furnace -- Reaction Routes of CaO-Fe2O3-TiO2 and Calcium Ferrite-TiO2 System in Continuous Heating Process -- Thermodynamic Calculations on Electric Furnace Smelting Separation of Chromium-bearing Vanadium Titanium Magnetite -- Preparation for High Activity Lime and its Effect on Desulfurization of Hot Metal Pretreatment -- Part 5. Extraction and Recovery of Metals -- An Industry Overlook of Secondary Lead Pyrometallurgical Processing -- Recovery of Aluminium and its Compounds with Hydro and Pyrometalurgical Methods from Non-metallic Residue -- Purification of Molten Zinc Chloride-Alkali Chloride by Cementation Reaction -- Thermodynamic Analysis of Smelting of Spent Catalysts for Recovery of Platinum Group Metals -- Preparation of Titanium Foams through Direct Electrolysis of the Sintered CaO-TiO2 in Molten Salt CaCl2 -- Experimental Study on Oxidative Desulfurization and Selective Reduction of Molten Copper Slag -- Recycling SiO2 and Al2O3 from the Metallurgical Slag of Nickel Laterite Ores in Molten Sodium Hydroxides -- Remove Sulfur in Copper Dross from Refining Lead by Converting Process -- Part 6. Treatment and Recycling of Metallurgical Slag/Solid Wastes -- Recovery of Fe-Cu Alloys from Copper Slags -- Physiochemical Properties of High Alumina Blast Furnace Slag -- Effect of Cooling Rate on the Acidolysis of Titania Slag -- Structural Analysis of Ge-containing Ferrous Calcium Silicate Magnesia Slag forApplications of Black Copper Smelting -- Selective Recovery of P and Mn from Steelmaking Slag by Carbothermic Reduction -- The Use of Zirconia-based Solid Electrolytes Oxygen Sensor in High Titanium Slag -- In-situ Observation of the Precipitation Behavior of Dy2O3 Containing Slag System -- Recovery of Zn and Mn from Spent Alkaline Batteries -- Part 7. Ironmaking, Steelmaking and Casting -- Optimization of Exothermic Riser Sleeve Design Parameters -- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process -- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel -- A Statistical Analysis of Process Abnormalities in Slab Casting -- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper -- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel -- Part 8. Agglomeration and Direct Reduction of Complex Iron Ores -- Study on Direct Reduction Melting Separation-leaching Process of Disposal Rare Earth Composite Iron Ore -- Reduction Behavior of Garnierite Using Methane by Roasting-Magnetic Separation Method -- Effect of Calculation Method of CaO Addition on Liquid Phase Fluidity -- Effect of Carbon Coating on Magnetite Reduction -- Optimization Method for Iron Ore Blending Based on the Sintering Basic Characteristics of Blended Ore -- Study on Direct Reduction of Low-grade Iron Ore-coal Mini-pellets in Coal-based Rotary Kiln -- Part 9. Poster Session I -- Controlled Synthesis of TiC Nanoparticles Using Solid Oxide Membrane Technology in Molten CaCl2 -- Effect of Chemical Components of Mould Flux on Dissolution Rate of Al2O3 into Molten Flux for High Manganese High Aluminum Steel -- Effect of Temperature on Oxidation Behavior of Cr-Mo-V Steel with Different Cr Contents for High-speed Train Brake Discs -- Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-rich Slag in Molten CaCl2 -- Evolution of Al-Ti-Mg-O Inclusions during Refining and Casting Process of Interstitial Free Steel -- Experimental Study on Carburization of Higher Vanadium-bearing Hot Metal -- Hematite Precipitation from High Iron Solution in Hydrometallurgy Process -- Influence On The Crystallization Phase Of Mold Flux By Magnetic Fields -- Kinetics Study on Limestone Decomposition in Early Converter Slag -- Mathematical Modeling and Analysis of Converter Slagging and Steelmaking Process by Replacing Part of Lime With Limestone -- Research of Digital Platform and Process Guidance Model in EAF Steelmaking Process -- Research on Factors Affecting and Prediction Model of Silicon Content in Hot Metal of Corex -- Studied on the Cooling Effect of CO2 on the Temperature of Vanadium in Converter -- Study on Grain Size and Porosity of the Produced Lime from Limestone in Early Converter Slag -- Study on Reducing Al2O3 Inclusions by Optimizing Refining Slag -- Study on the Volatilization of Sb2S3 in Vacuum -- The Effects of ZrO2, Y2O3 and Sc2O3 on the Properties of Mould Fluxes for High Manganese High Aluminum Steels -- Thermogravimetric Analysis and Kinetic Study of the Calcification Roasting of Vanadium Slag -- Viscosity of Mould Flux under Electromagnetic Field -- Part 10. Poster Session II -- Analysis of Microwave Drying Behavior of Nickel Laterite -- Analysis of Operational Parameters Affecting Metallization Degree of DRI in Reduction Shaft of COREX Process and Improvement Measures -- Dechlorination of Zinc Oxide Dust by Microwave Rosating with RSM Optimization -- Effect of TiO2 on the Viscous Behavior of High Alumina Blast Furnace Slag -- Fundamental Research on the Iron Nugget Process from Carbon Composite Pellet -- Influence of Coke Quality on Main Technical Indexes of Blast Furnace -- Kinetic Analysis of Blast Furnace Dust Recycling with Flash Reduction Process at High Temperature -- Preparation and Characterization of Iron-coke Briquette -- Preparation of Oxidized pellets with Chrome Ore -- Research and Application of Sintering Surface Steam Spraying Technology for Energy Saving and Quality Improvement -- Research on Bonding Mechanism of Sintering Grate -- Research on Optimizing Sinter Ore Matching Based on the High Temperature Characteristic Numbers -- Research on the Mineral Composition and Microstructure Changes of Iron Ore Sinter during the Gas-Solid Reduction -- Roasting Kinetics of Molybdenite Concentrates -- Study on Influences of Different Ti-bearing Materials on MgO-bearing Pellets Metallurgical Properties -- Supergravity Separation of Pb and Sn from Waste Printed Circuit Boards -- The Effect of Temperature and Additive on Transport and Transformation of P of High-phosphorus Iron Ore during Carbothermic Reduction -- Thermodynamic Calculations on Direct Reduction of Chromium-bearing Vanadium Titanium Magnetite. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i 9th International Symposium on High-Temperature Metallurgical Processing [documento electrónico] / Hwang, Jiann-Yang, ; Jiang, Tao, ; Kennedy, Mark William, ; Gregurek, Dean, ; Wang, Shijie, ; Zhao, Baojun, ; Yücel, Onuralp, ; Keskinkilic, Ender, ; Downey, Jerome P., ; Peng, Zhiwei, ; Padilla, Rafael, . - 1 ed. . - [s.l.] : Springer, 2018 . - XXIV, 887 p. 534 ilustraciones.
ISBN : 978-3-319-72138-5
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Material Rieles Materiales Caracterización y Técnica Analítica Metales y aleaciones Ingeniería de Materiales Índice Dewey: 620.112 Resumen: En los últimos años, las industrias metalúrgicas mundiales han experimentado un crecimiento rápido y próspero. La tecnología metalúrgica de alta temperatura es la columna vertebral para satisfacer las necesidades técnicas, ambientales y económicas del crecimiento. Esta colección presenta contribuciones que cubren los avances y desarrollos de nuevas tecnologías metalúrgicas de alta temperatura y sus aplicaciones en las áreas de procesamiento de minerales; extracción de metales; preparación de materiales metálicos, refractarios y cerámicos; tratamiento y reciclaje de escorias y residuos; y ahorro de energía y protección del medio ambiente. El volumen tendrá un amplio impacto en los académicos y profesionales que prestan servicios en las industrias metalúrgicas de todo el mundo. Nota de contenido: Part 1. Energy-efficient and Clean Metallurgical Technology -- Simplified Process for Making Anode Copper -- Techno-economic Analysis of Energy Recovery from Plastic Waste -- Development of Continuous Blast Furnace Slag Solidification Process for Coarse Aggregates -- An Innovative Oxygen-enriched Flash Smelting Technology for Lead Smelting and its Industrial Application -- Characteristics and Control Technology of Fine Particulate Matter (PM) of Iron Ore Sintering -- Sintering Bed Spraying Steam to Reduce NOx and Dioxin Emissions in Shougang -- Part 2. Simulation and Modeling of High Temperature Metallurgical Process -- Neural Prediction Model for Extraction of Germanium from Zinc Oxide Dust by Microwave Alkaline Roasting-Water Leaching -- Simulation of Velocity Field of Molten Steel in Electric Arc Furnace Steelmaking -- Thermodynamic Modelling of Magnesium, Calcium and Strontium-oxides Reduction Systems in Vacuum -- Metallization and Carburization Kinetics in DR Shaft Furnaces. The Metcarb Model -- CFD Modeling of Flow and Chemical Reactions in a Submerged Lance Copper Smelting Furnace -- Numerical Simulation of Ultrasound-Induced Cavitation Bubbling in a Calcium Ferrite Melt -- Part 3. Alloys and Materials Preparation -- Synthesis of Nanocrystalline Carbide Ceramics via Reduction of Anion-loaded Activated Carbon Precursors -- Production of Lithium-Ion Cathode Material for Automotive Batteries Using Melting Casting Process -- Part 4. Fundamental Research on High Temperature Metallurgical Processing -- Degradation Mechanisms of Refractories in a Bottom Blown Copper Smelting Furnace -- Reaction Routes of CaO-Fe2O3-TiO2 and Calcium Ferrite-TiO2 System in Continuous Heating Process -- Thermodynamic Calculations on Electric Furnace Smelting Separation of Chromium-bearing Vanadium Titanium Magnetite -- Preparation for High Activity Lime and its Effect on Desulfurization of Hot Metal Pretreatment -- Part 5. Extraction and Recovery of Metals -- An Industry Overlook of Secondary Lead Pyrometallurgical Processing -- Recovery of Aluminium and its Compounds with Hydro and Pyrometalurgical Methods from Non-metallic Residue -- Purification of Molten Zinc Chloride-Alkali Chloride by Cementation Reaction -- Thermodynamic Analysis of Smelting of Spent Catalysts for Recovery of Platinum Group Metals -- Preparation of Titanium Foams through Direct Electrolysis of the Sintered CaO-TiO2 in Molten Salt CaCl2 -- Experimental Study on Oxidative Desulfurization and Selective Reduction of Molten Copper Slag -- Recycling SiO2 and Al2O3 from the Metallurgical Slag of Nickel Laterite Ores in Molten Sodium Hydroxides -- Remove Sulfur in Copper Dross from Refining Lead by Converting Process -- Part 6. Treatment and Recycling of Metallurgical Slag/Solid Wastes -- Recovery of Fe-Cu Alloys from Copper Slags -- Physiochemical Properties of High Alumina Blast Furnace Slag -- Effect of Cooling Rate on the Acidolysis of Titania Slag -- Structural Analysis of Ge-containing Ferrous Calcium Silicate Magnesia Slag forApplications of Black Copper Smelting -- Selective Recovery of P and Mn from Steelmaking Slag by Carbothermic Reduction -- The Use of Zirconia-based Solid Electrolytes Oxygen Sensor in High Titanium Slag -- In-situ Observation of the Precipitation Behavior of Dy2O3 Containing Slag System -- Recovery of Zn and Mn from Spent Alkaline Batteries -- Part 7. Ironmaking, Steelmaking and Casting -- Optimization of Exothermic Riser Sleeve Design Parameters -- Assessment of Gas-Slag-Metal Interaction during a Converter Steelmaking Process -- On the Role of Nb on the Texture and Mechanical Properties of a Novel As-rolled Medium Carbon Wear Resistant Slurry Pipeline Steel -- A Statistical Analysis of Process Abnormalities in Slab Casting -- Effect of Density Difference on Particle Segregation Behaviors at Bell-less Top Blast Furnace with Parallel-type Hopper -- The Effect of Austenitizing Temperature on Hardenability, Precipitation and Mechanical Properties of Boron Bearing Cr-Mo Alloy Steel -- Part 8. Agglomeration and Direct Reduction of Complex Iron Ores -- Study on Direct Reduction Melting Separation-leaching Process of Disposal Rare Earth Composite Iron Ore -- Reduction Behavior of Garnierite Using Methane by Roasting-Magnetic Separation Method -- Effect of Calculation Method of CaO Addition on Liquid Phase Fluidity -- Effect of Carbon Coating on Magnetite Reduction -- Optimization Method for Iron Ore Blending Based on the Sintering Basic Characteristics of Blended Ore -- Study on Direct Reduction of Low-grade Iron Ore-coal Mini-pellets in Coal-based Rotary Kiln -- Part 9. Poster Session I -- Controlled Synthesis of TiC Nanoparticles Using Solid Oxide Membrane Technology in Molten CaCl2 -- Effect of Chemical Components of Mould Flux on Dissolution Rate of Al2O3 into Molten Flux for High Manganese High Aluminum Steel -- Effect of Temperature on Oxidation Behavior of Cr-Mo-V Steel with Different Cr Contents for High-speed Train Brake Discs -- Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-rich Slag in Molten CaCl2 -- Evolution of Al-Ti-Mg-O Inclusions during Refining and Casting Process of Interstitial Free Steel -- Experimental Study on Carburization of Higher Vanadium-bearing Hot Metal -- Hematite Precipitation from High Iron Solution in Hydrometallurgy Process -- Influence On The Crystallization Phase Of Mold Flux By Magnetic Fields -- Kinetics Study on Limestone Decomposition in Early Converter Slag -- Mathematical Modeling and Analysis of Converter Slagging and Steelmaking Process by Replacing Part of Lime With Limestone -- Research of Digital Platform and Process Guidance Model in EAF Steelmaking Process -- Research on Factors Affecting and Prediction Model of Silicon Content in Hot Metal of Corex -- Studied on the Cooling Effect of CO2 on the Temperature of Vanadium in Converter -- Study on Grain Size and Porosity of the Produced Lime from Limestone in Early Converter Slag -- Study on Reducing Al2O3 Inclusions by Optimizing Refining Slag -- Study on the Volatilization of Sb2S3 in Vacuum -- The Effects of ZrO2, Y2O3 and Sc2O3 on the Properties of Mould Fluxes for High Manganese High Aluminum Steels -- Thermogravimetric Analysis and Kinetic Study of the Calcification Roasting of Vanadium Slag -- Viscosity of Mould Flux under Electromagnetic Field -- Part 10. Poster Session II -- Analysis of Microwave Drying Behavior of Nickel Laterite -- Analysis of Operational Parameters Affecting Metallization Degree of DRI in Reduction Shaft of COREX Process and Improvement Measures -- Dechlorination of Zinc Oxide Dust by Microwave Rosating with RSM Optimization -- Effect of TiO2 on the Viscous Behavior of High Alumina Blast Furnace Slag -- Fundamental Research on the Iron Nugget Process from Carbon Composite Pellet -- Influence of Coke Quality on Main Technical Indexes of Blast Furnace -- Kinetic Analysis of Blast Furnace Dust Recycling with Flash Reduction Process at High Temperature -- Preparation and Characterization of Iron-coke Briquette -- Preparation of Oxidized pellets with Chrome Ore -- Research and Application of Sintering Surface Steam Spraying Technology for Energy Saving and Quality Improvement -- Research on Bonding Mechanism of Sintering Grate -- Research on Optimizing Sinter Ore Matching Based on the High Temperature Characteristic Numbers -- Research on the Mineral Composition and Microstructure Changes of Iron Ore Sinter during the Gas-Solid Reduction -- Roasting Kinetics of Molybdenite Concentrates -- Study on Influences of Different Ti-bearing Materials on MgO-bearing Pellets Metallurgical Properties -- Supergravity Separation of Pb and Sn from Waste Printed Circuit Boards -- The Effect of Temperature and Additive on Transport and Transformation of P of High-phosphorus Iron Ore during Carbothermic Reduction -- Thermodynamic Calculations on Direct Reduction of Chromium-bearing Vanadium Titanium Magnetite. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i
Título : Energy Technology 2017 : Carbon Dioxide Management and Other Technologies Tipo de documento: documento electrónico Autores: Zhang, Lei, ; Drelich, Jaroslaw W., ; Neelameggham, Neale R., ; Guillen, Donna Post, ; Haque, Nawshad, ; Zhu, Jingxi, ; Sun, Ziqi, ; Wang, Tao, ; Howarter, John A., ; Tesfaye, Fiseha, ; Ikhmayies, Shadia, ; Olivetti, Elsa, ; Kennedy, Mark William, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2017 Número de páginas: XXII, 499 p. 244 ilustraciones ISBN/ISSN/DL: 978-3-319-52192-3 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Materiales Catálisis Fuerza y energía Material Fuentes de energía renovable Materiales para Energía y Catálisis Caracterización y Técnica Analítica Energía renovable Índice Dewey: 620.1 Mecánica y materiales de Ingeniería Resumen: Esta colección se centra en tecnologías energéticamente eficientes, incluido el beneficio innovador de minerales, tecnologías de fundición, reciclaje y recuperación de calor residual. El volumen también cubre varios aspectos tecnológicos de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. Artículos que abordan recursos energéticos renovables para la producción de metales y materiales, recuperación de calor residual y otras tecnologías industriales energéticamente eficientes, nuevos conceptos o dispositivos para la generación y conversión de energía, mejora de la eficiencia energética en la ingeniería de procesos, sostenibilidad y evaluación del ciclo de vida de los sistemas energéticos, así como Se incluye la termodinámica y modelado para procesos metalúrgicos sustentables. Este volumen también ofrece temas sobre el secuestro de CO2 y la reducción de las emisiones de gases de efecto invernadero procedentes de la ingeniería de procesos, las tecnologías sostenibles en la metalurgia extractiva, así como las industrias de procesamiento y fabricación de materiales con menor consumo de energía y emisiones de CO2. También se incluyen en este volumen las contribuciones de todos los ámbitos de las fuentes de energía no nuclear y no tradicional, como la solar, la eólica y la biomasa. Los artículos de los siguientes simposios se presentan en el libro: Tecnologías energéticas Avances en tecnologías ambientales: sesión conjunta sobre reciclaje y sostenibilidad Derivación del valor de materiales de desecho desafiantes: sesión conjunta sobre reciclaje y sostenibilidad Silicio de células solares. Nota de contenido: Part 1: Energy Technologies: Energy Technologies -- Continuous optimization of the energy input – The success story of AOS -- Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes -- Transforming the way electricity is consumed during the aluminium smelting process -- The thermodynamics of slag forming inorganic phases in biomass combustion processes -- Leaching of Sb from TROF furnace Doré Slag -- Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors -- Part 3: Energy Technologies: Novel Technologies -- Modeling Anthropogenic Heat Flux in Climate Models -- In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications -- Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method -- Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement -- Part 4: Energy Technologies: Heat Recovery -- Integrated utilization of sewage sludge and coal gangue in clinker manufacture -- Valuable metals and energy recovery from electronic waste streams -- Dry Granulation of Hot Metal and Heat Recovery from Off-Gas -- Energy Recovery of Livestock Waste in Taiwan -- Life cycle assessments of incineration treatment for sharp medical waste -- Part 5: Energy Technologies: Poster Session -- Effect of granularity on pretreatment of coke with microwave irradiation -- Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal -- Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere -- Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I -- Maximizing the values of steelmaking slags -- Recycling of zinc from the steelmaking dust in the sintering process -- Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method -- Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II -- Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics -- Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review -- Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III -- Chromium removal from iron-rich waste generated during processing lateritic nickel ores -- Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization -- Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination -- Thermodynamic analysis of the recycling of aircraft Al alloys -- Lithium-ion Battery Recycling Through Secondary Aluminum Production -- Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session -- Alternative method for materials separa-tion from crystalline silicon photovoltaic modules -- Bioleaching process for metal recovery from waste materials -- Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil -- Preparing ferrosilicon alloy with copper slag -- Research on Optimization of Sintering Mixture with Low-grade Complex Ore -- Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties -- Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore -- Phase Analysis of the Si-O2 System -- Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan -- Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining -- Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment -- Evaporation removal of boron in molten silicon using reactive fluxes -- Part 12: Solar Cell Silicon: Silicon Photovoltaics -- Electrodynamic Eddy Current Separation of End-of-Life PV Materials -- Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells -- Influence of Oxygen Content on the Wettability of Silicon on Graphite -- Particle Separation in Silicon Ingot Casting Using AC Magnetic Field -- Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty -- Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10 -- Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery -- Accelerating life-cycle management protocols for new generation batteries -- Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques -- The use of rice husk ash as an aggregate for foundry sand mould production -- Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session -- Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange -- Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane -- Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i Energy Technology 2017 : Carbon Dioxide Management and Other Technologies [documento electrónico] / Zhang, Lei, ; Drelich, Jaroslaw W., ; Neelameggham, Neale R., ; Guillen, Donna Post, ; Haque, Nawshad, ; Zhu, Jingxi, ; Sun, Ziqi, ; Wang, Tao, ; Howarter, John A., ; Tesfaye, Fiseha, ; Ikhmayies, Shadia, ; Olivetti, Elsa, ; Kennedy, Mark William, . - 1 ed. . - [s.l.] : Springer, 2017 . - XXII, 499 p. 244 ilustraciones.
ISBN : 978-3-319-52192-3
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Materiales Catálisis Fuerza y energía Material Fuentes de energía renovable Materiales para Energía y Catálisis Caracterización y Técnica Analítica Energía renovable Índice Dewey: 620.1 Mecánica y materiales de Ingeniería Resumen: Esta colección se centra en tecnologías energéticamente eficientes, incluido el beneficio innovador de minerales, tecnologías de fundición, reciclaje y recuperación de calor residual. El volumen también cubre varios aspectos tecnológicos de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. Artículos que abordan recursos energéticos renovables para la producción de metales y materiales, recuperación de calor residual y otras tecnologías industriales energéticamente eficientes, nuevos conceptos o dispositivos para la generación y conversión de energía, mejora de la eficiencia energética en la ingeniería de procesos, sostenibilidad y evaluación del ciclo de vida de los sistemas energéticos, así como Se incluye la termodinámica y modelado para procesos metalúrgicos sustentables. Este volumen también ofrece temas sobre el secuestro de CO2 y la reducción de las emisiones de gases de efecto invernadero procedentes de la ingeniería de procesos, las tecnologías sostenibles en la metalurgia extractiva, así como las industrias de procesamiento y fabricación de materiales con menor consumo de energía y emisiones de CO2. También se incluyen en este volumen las contribuciones de todos los ámbitos de las fuentes de energía no nuclear y no tradicional, como la solar, la eólica y la biomasa. Los artículos de los siguientes simposios se presentan en el libro: Tecnologías energéticas Avances en tecnologías ambientales: sesión conjunta sobre reciclaje y sostenibilidad Derivación del valor de materiales de desecho desafiantes: sesión conjunta sobre reciclaje y sostenibilidad Silicio de células solares. Nota de contenido: Part 1: Energy Technologies: Energy Technologies -- Continuous optimization of the energy input – The success story of AOS -- Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes -- Transforming the way electricity is consumed during the aluminium smelting process -- The thermodynamics of slag forming inorganic phases in biomass combustion processes -- Leaching of Sb from TROF furnace Doré Slag -- Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors -- Part 3: Energy Technologies: Novel Technologies -- Modeling Anthropogenic Heat Flux in Climate Models -- In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications -- Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method -- Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement -- Part 4: Energy Technologies: Heat Recovery -- Integrated utilization of sewage sludge and coal gangue in clinker manufacture -- Valuable metals and energy recovery from electronic waste streams -- Dry Granulation of Hot Metal and Heat Recovery from Off-Gas -- Energy Recovery of Livestock Waste in Taiwan -- Life cycle assessments of incineration treatment for sharp medical waste -- Part 5: Energy Technologies: Poster Session -- Effect of granularity on pretreatment of coke with microwave irradiation -- Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal -- Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere -- Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I -- Maximizing the values of steelmaking slags -- Recycling of zinc from the steelmaking dust in the sintering process -- Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method -- Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II -- Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics -- Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review -- Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III -- Chromium removal from iron-rich waste generated during processing lateritic nickel ores -- Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization -- Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination -- Thermodynamic analysis of the recycling of aircraft Al alloys -- Lithium-ion Battery Recycling Through Secondary Aluminum Production -- Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session -- Alternative method for materials separa-tion from crystalline silicon photovoltaic modules -- Bioleaching process for metal recovery from waste materials -- Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil -- Preparing ferrosilicon alloy with copper slag -- Research on Optimization of Sintering Mixture with Low-grade Complex Ore -- Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties -- Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore -- Phase Analysis of the Si-O2 System -- Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan -- Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining -- Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment -- Evaporation removal of boron in molten silicon using reactive fluxes -- Part 12: Solar Cell Silicon: Silicon Photovoltaics -- Electrodynamic Eddy Current Separation of End-of-Life PV Materials -- Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells -- Influence of Oxygen Content on the Wettability of Silicon on Graphite -- Particle Separation in Silicon Ingot Casting Using AC Magnetic Field -- Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty -- Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10 -- Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery -- Accelerating life-cycle management protocols for new generation batteries -- Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques -- The use of rice husk ash as an aggregate for foundry sand mould production -- Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session -- Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange -- Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane -- Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments. En línea: https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Link: https://biblioteca.umanizales.edu.co/ils/opac_css/index.php?lvl=notice_display&i
