Información del autor
Autor Furlong, Cosme |
Documentos disponibles escritos por este autor (5)
Crear una solicitud de compra Refinar búsquedaAdvancement of Optical Methods & Digital Image Correlation in Experimental Mechanics / Lin, Ming-Tzer ; Furlong, Cosme ; Hwang, Chi-Hung
TÃtulo : Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics : Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics Tipo de documento: documento electrónico Autores: Lin, Ming-Tzer, ; Furlong, Cosme, ; Hwang, Chi-Hung, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2021 Número de páginas: VII, 99 p. 92 ilustraciones, 63 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-59773-3 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Medidas ópticas MetrologÃa Material fotónica IngenierÃa óptica Materiales ópticos Mecánica Aplicada MetrologÃa óptica Técnica de caracterización de materiales Fotónica e IngenierÃa Óptica IngenierÃa Mecánica Clasificación: Resumen: Avance de los métodos ópticos y la correlación de imágenes digitales en la mecánica experimental, volumen 4 de las actas de la conferencia y exposición anual SEM 2020 sobre mecánica experimental y aplicada, el cuarto volumen de siete de la conferencia, reúne contribuciones a esta importante área de investigación y ingenierÃa. La colección presenta los primeros hallazgos y estudios de casos sobre una amplia gama de métodos ópticos que van desde la fotoelasticidad y la interferometrÃa tradicionales hasta las técnicas DIC y DVC más recientes, e incluye artÃculos en las siguientes áreas de investigación técnica general: Métodos DIC y sus aplicaciones. Aplicaciones de fotoelsticidad e interferometrÃa. Óptica y Sistemas MicroscópicosMultiescala. Nota de contenido: Chapter 1. Diagnosis of Deformation Stages with Optical Interferometric Technique and Comprehensive Theory of Deformation and Fracture -- Chapter 2. Non-Contact Measurement of Strains Using Two Orthogonal Sets of Twin 'Blue' Lasers -- Chapter 3. Experimental Observations on the Fracture of Metals -- Chapter 4. A Digital Laser Speckle Technique for Generating Slope, Curvature, and Deflection Contours of Bent Plates -- Chapter 5. Holography and Holographic Interferometry via Photopolymer Film -- Chapter 6. Evaluating Stresses from measured strains in Viscoelastic Body Using Numerical Laplace Transformation -- Chapter 7. Evaluation of the Influence of Water Absorptivity on the Properties of CFRP Cylinder Materials by SHPB Impact Compression Test -- Chapter 8. Speckling and Testing with DIC at Micro Scales -- Chapter 9. Perspective Compensation of 2D-DIC Measurements by Combination with Speckle Imaging -- Chapter 10. Holographic Measurement of Semi-Transparent Tympanic Membrane Shape Using MultipleAngle Illuminations -- Chapter 11. Characterization of Interface Debonding Behavior Utilizing an Embedded Digital Image Correlation Scheme -- Chapter 12. Preliminary Characterization of a Plastic Piezoelectric Motor Stator Using High-speed Digital Holographic Interferometry -- Chapter 13. DIC Measurement of Anisotropy for Plastically Deformed Thermoplastic. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics : Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics [documento electrónico] / Lin, Ming-Tzer, ; Furlong, Cosme, ; Hwang, Chi-Hung, . - 1 ed. . - [s.l.] : Springer, 2021 . - VII, 99 p. 92 ilustraciones, 63 ilustraciones en color.
ISBN : 978-3-030-59773-3
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Medidas ópticas MetrologÃa Material fotónica IngenierÃa óptica Materiales ópticos Mecánica Aplicada MetrologÃa óptica Técnica de caracterización de materiales Fotónica e IngenierÃa Óptica IngenierÃa Mecánica Clasificación: Resumen: Avance de los métodos ópticos y la correlación de imágenes digitales en la mecánica experimental, volumen 4 de las actas de la conferencia y exposición anual SEM 2020 sobre mecánica experimental y aplicada, el cuarto volumen de siete de la conferencia, reúne contribuciones a esta importante área de investigación y ingenierÃa. La colección presenta los primeros hallazgos y estudios de casos sobre una amplia gama de métodos ópticos que van desde la fotoelasticidad y la interferometrÃa tradicionales hasta las técnicas DIC y DVC más recientes, e incluye artÃculos en las siguientes áreas de investigación técnica general: Métodos DIC y sus aplicaciones. Aplicaciones de fotoelsticidad e interferometrÃa. Óptica y Sistemas MicroscópicosMultiescala. Nota de contenido: Chapter 1. Diagnosis of Deformation Stages with Optical Interferometric Technique and Comprehensive Theory of Deformation and Fracture -- Chapter 2. Non-Contact Measurement of Strains Using Two Orthogonal Sets of Twin 'Blue' Lasers -- Chapter 3. Experimental Observations on the Fracture of Metals -- Chapter 4. A Digital Laser Speckle Technique for Generating Slope, Curvature, and Deflection Contours of Bent Plates -- Chapter 5. Holography and Holographic Interferometry via Photopolymer Film -- Chapter 6. Evaluating Stresses from measured strains in Viscoelastic Body Using Numerical Laplace Transformation -- Chapter 7. Evaluation of the Influence of Water Absorptivity on the Properties of CFRP Cylinder Materials by SHPB Impact Compression Test -- Chapter 8. Speckling and Testing with DIC at Micro Scales -- Chapter 9. Perspective Compensation of 2D-DIC Measurements by Combination with Speckle Imaging -- Chapter 10. Holographic Measurement of Semi-Transparent Tympanic Membrane Shape Using MultipleAngle Illuminations -- Chapter 11. Characterization of Interface Debonding Behavior Utilizing an Embedded Digital Image Correlation Scheme -- Chapter 12. Preliminary Characterization of a Plastic Piezoelectric Motor Stator Using High-speed Digital Holographic Interferometry -- Chapter 13. DIC Measurement of Anisotropy for Plastically Deformed Thermoplastic. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 : Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics Tipo de documento: documento electrónico Autores: Lamberti, Luciano, ; Lin, Ming-Tzer, ; Furlong, Cosme, ; Sciammarella, Cesar, ; Reu, Phillip L., ; Sutton, Michael A., Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2019 Número de páginas: XIII, 264 p. 211 ilustraciones, 172 ilustraciones en color. ISBN/ISSN/DL: 978-3-319-97481-1 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Telecomunicación Mecánica Aplicada Material Matemáticas de ingenierÃa IngenierÃa Láseres Microondas IngenierÃa de RF y Comunicaciones Ópticas IngenierÃa Mecánica Caracterización y Técnica AnalÃtica Aplicaciones de ingenierÃa matemática y computacional Láser Clasificación: Resumen: Avance de los métodos ópticos y la correlación de imágenes digitales en la mecánica experimental, volumen 3 de las actas de la conferencia y exposición anual SEM de 2018 sobre mecánica experimental y aplicada, el tercer volumen de ocho de la conferencia, reúne contribuciones a esta importante área de investigación y ingenierÃa. La colección presenta hallazgos iniciales y estudios de casos sobre una amplia gama de métodos ópticos que van desde la fotoelasticidad tradicional y la interferometrÃa hasta técnicas DIC y DVC más recientes, e incluye artÃculos en las siguientes áreas de investigación técnica general: Nuevos desarrollos en métodos ópticos y análisis de patrones de franjas; Aplicaciones DIC para entornos desafiantes; Métodos ópticos en SEM: historia y perspectiva; Caracterización Mecánica de Materiales y Estructuras con Métodos Ópticos; BioingenierÃa. Nota de contenido: Chapter 1. Beyond the Airbrush: Applications of Digital Image Correlation in Vascular Biomechanics -- Chapter 2. A New Method of Fringe Pattern Analysis -- Chapter 3. A Review: Optical Methods that Evaluate Displacement Information (40-min) -- Chapter 4. Measuring Spallation Strength of Epoxy by Laser Spallation Technique -- Chapter 5. Uncertainty Quantifications for Multiviewcorrelation -- Chapter 6. Image Analysis of Curvature Using Classical Mechanics, The Elastica -- Chapter 7. Fast Adaptive Global Digital Image Correlation -- Chapter 8. Speckle Image Rendering for DIC Performance Assessment -- chapter 9. Speckles and DIC or Checkerboards and LSA? -- Chapter 10. Update on the 2D-DIC Challenge: Results and Conclusions -- Chapter 11.Eliminating Air Refraction Issues in DIC by Conducting Experiments in Vacuum -- Chapter 12. Identification of Deformation Mechanism in Biomaterials Through AFM and Digital Image Correlation -- Chapter 13. Fast, Sub-Pixel Accurate Digital Image Correlation Algorithm Powered by Heterogeneous (CPU-GPU) Framework -- Chapter 14. Vibration Modal Analysis by High-Speed and Accurate Shape Measurement using One-Pitch Phase Analysis Method -- Chapter 15. DIC Image on FIB Ring-Core Analysis of Depth Sensing Residual Stress Measurement of Thin Films -- Chapter 16. Measurement of Local Strain Distribution and Its Variation Near Eyes During Blink Using Digital Image Correlation -- Chapter 17. Investigating Fatigue Striation Morphology in Crystallisable Elastomers by using a Phase Extraction Algorithm -- Chapter 18. Ultra-High Speed Imaging for DIC Measurements in Kolsky Bar Experiments -- Chapter 19. Application of Digital Image Correlation to Structures in Fire -- Chapter 20. Full-Field Determination of the Taylor-Quinney Coefficient in Tension Tests of Ti-6Al-4V at Strain Rates up to 7000 sˉ¹ -- Chapter 21. Laser and White-light Speckle Techniques - A Brief Review (40-min) -- Chapter 22. Accurate Reconstruction of High-gradient Strain Field in Digital Image Correlation: A Local Hermite Scheme -- Chapter 23. Development of a New Normalization Technique for Twelve- Fringe Photoelasticity (TFP) -- Chapter 24. On Performing Spatiotemporal Stereocorrelation at Very High Temperatures -- Chapter 25. Compression Tests on CFRP Analyzed by Digital Image Correlation -- Chapter 26. Evaluation of Residual Stress with Optical Methods -- Chapter 27. Elevated Temperature Optical Microscopy DIC -- chapter 28. A Digital Laser Speckle Technique for Generating Slope Contours of Bent Plate -- Chapter 29. Deflectometry on Curved Surfaces -- Chapter 30. Measurement on a Sample of Fuel Cell at High Temperature -- Chapter 31. Simulation of 3D Reconstruction of Conical Calibration Targets -- Chapter 32. Recent Advancements and Perspective about Digital Holography: A Super-tool in Biomedical and Bioengineering Fields -- Chapter 33. High-speed Holographic Shape and Transient Response Measurements of Mammalian Tympanic Membrane -- Chapter 34. High-speed Digital Image Correlation forEndoscopy: a Feasibility Study -- Chapter 35. Holographic Interferometry - Then and Now. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Advancement of Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 : Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics [documento electrónico] / Lamberti, Luciano, ; Lin, Ming-Tzer, ; Furlong, Cosme, ; Sciammarella, Cesar, ; Reu, Phillip L., ; Sutton, Michael A., . - 1 ed. . - [s.l.] : Springer, 2019 . - XIII, 264 p. 211 ilustraciones, 172 ilustraciones en color.
ISBN : 978-3-319-97481-1
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Telecomunicación Mecánica Aplicada Material Matemáticas de ingenierÃa IngenierÃa Láseres Microondas IngenierÃa de RF y Comunicaciones Ópticas IngenierÃa Mecánica Caracterización y Técnica AnalÃtica Aplicaciones de ingenierÃa matemática y computacional Láser Clasificación: Resumen: Avance de los métodos ópticos y la correlación de imágenes digitales en la mecánica experimental, volumen 3 de las actas de la conferencia y exposición anual SEM de 2018 sobre mecánica experimental y aplicada, el tercer volumen de ocho de la conferencia, reúne contribuciones a esta importante área de investigación y ingenierÃa. La colección presenta hallazgos iniciales y estudios de casos sobre una amplia gama de métodos ópticos que van desde la fotoelasticidad tradicional y la interferometrÃa hasta técnicas DIC y DVC más recientes, e incluye artÃculos en las siguientes áreas de investigación técnica general: Nuevos desarrollos en métodos ópticos y análisis de patrones de franjas; Aplicaciones DIC para entornos desafiantes; Métodos ópticos en SEM: historia y perspectiva; Caracterización Mecánica de Materiales y Estructuras con Métodos Ópticos; BioingenierÃa. Nota de contenido: Chapter 1. Beyond the Airbrush: Applications of Digital Image Correlation in Vascular Biomechanics -- Chapter 2. A New Method of Fringe Pattern Analysis -- Chapter 3. A Review: Optical Methods that Evaluate Displacement Information (40-min) -- Chapter 4. Measuring Spallation Strength of Epoxy by Laser Spallation Technique -- Chapter 5. Uncertainty Quantifications for Multiviewcorrelation -- Chapter 6. Image Analysis of Curvature Using Classical Mechanics, The Elastica -- Chapter 7. Fast Adaptive Global Digital Image Correlation -- Chapter 8. Speckle Image Rendering for DIC Performance Assessment -- chapter 9. Speckles and DIC or Checkerboards and LSA? -- Chapter 10. Update on the 2D-DIC Challenge: Results and Conclusions -- Chapter 11.Eliminating Air Refraction Issues in DIC by Conducting Experiments in Vacuum -- Chapter 12. Identification of Deformation Mechanism in Biomaterials Through AFM and Digital Image Correlation -- Chapter 13. Fast, Sub-Pixel Accurate Digital Image Correlation Algorithm Powered by Heterogeneous (CPU-GPU) Framework -- Chapter 14. Vibration Modal Analysis by High-Speed and Accurate Shape Measurement using One-Pitch Phase Analysis Method -- Chapter 15. DIC Image on FIB Ring-Core Analysis of Depth Sensing Residual Stress Measurement of Thin Films -- Chapter 16. Measurement of Local Strain Distribution and Its Variation Near Eyes During Blink Using Digital Image Correlation -- Chapter 17. Investigating Fatigue Striation Morphology in Crystallisable Elastomers by using a Phase Extraction Algorithm -- Chapter 18. Ultra-High Speed Imaging for DIC Measurements in Kolsky Bar Experiments -- Chapter 19. Application of Digital Image Correlation to Structures in Fire -- Chapter 20. Full-Field Determination of the Taylor-Quinney Coefficient in Tension Tests of Ti-6Al-4V at Strain Rates up to 7000 sˉ¹ -- Chapter 21. Laser and White-light Speckle Techniques - A Brief Review (40-min) -- Chapter 22. Accurate Reconstruction of High-gradient Strain Field in Digital Image Correlation: A Local Hermite Scheme -- Chapter 23. Development of a New Normalization Technique for Twelve- Fringe Photoelasticity (TFP) -- Chapter 24. On Performing Spatiotemporal Stereocorrelation at Very High Temperatures -- Chapter 25. Compression Tests on CFRP Analyzed by Digital Image Correlation -- Chapter 26. Evaluation of Residual Stress with Optical Methods -- Chapter 27. Elevated Temperature Optical Microscopy DIC -- chapter 28. A Digital Laser Speckle Technique for Generating Slope Contours of Bent Plate -- Chapter 29. Deflectometry on Curved Surfaces -- Chapter 30. Measurement on a Sample of Fuel Cell at High Temperature -- Chapter 31. Simulation of 3D Reconstruction of Conical Calibration Targets -- Chapter 32. Recent Advancements and Perspective about Digital Holography: A Super-tool in Biomedical and Bioengineering Fields -- Chapter 33. High-speed Holographic Shape and Transient Response Measurements of Mammalian Tympanic Membrane -- Chapter 34. High-speed Digital Image Correlation forEndoscopy: a Feasibility Study -- Chapter 35. Holographic Interferometry - Then and Now. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Advancement of Optical Methods in Experimental Mechanics, Volume 3 : Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics Tipo de documento: documento electrónico Autores: Lamberti, Luciano, ; Lin, Ming-Tzer, ; Furlong, Cosme, ; Sciammarella, Cesar, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2018 Número de páginas: VIII, 118 p. 109 ilustraciones, 82 ilustraciones en color. ISBN/ISSN/DL: 978-3-319-63028-1 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Mecánica Aplicada Material Análisis de espectro Láseres IngenierÃa Mecánica Caracterización y Técnica AnalÃtica Espectroscopia Láser Clasificación: Resumen: Avance de métodos ópticos en mecánica experimental, volumen 3 de las actas de la conferencia y exposición anual SEM de 2017 sobre mecánica experimental y aplicada, el tercer volumen de nueve de la conferencia, reúne contribuciones a esta importante área de investigación e ingenierÃa. La colección presenta hallazgos iniciales y estudios de casos sobre una amplia gama de métodos ópticos que van desde la fotoelasticidad e interferometrÃa tradicionales hasta técnicas DIC y DVC más recientes, e incluye artÃculos en las siguientes áreas de investigación técnica general. Nota de contenido: Chapter1. A New Method for Improving Measurement Accuracy of Digital Image Correlation -- Chapter2. Fatigue Analysis of 7075 Aluminum Alloy by Optoacoustic Method -- Chapter3. Early Strain Localization in Strong Work Hardening Aluminium Alloy (2198 T3): 3D Laminography and DVC Measurement -- Chapter4. On the In-Plane Displacement Measurement by 3D Digital Image Correlation Method -- Chapter5. Noise Reduction in Amplitude-Fluctuation Electronic Speckle-Pattern Interferometry -- Chapter6. Evaluating Path of Stress Triaxiality to Fracture of Thin Steel Sheet Using Stereovision -- Chapter7. Studying with a Full-Field Measurement Technique the Local Response of Asphalt Specimens Subjected to Freeze-Thaw Cycles -- Chapter8. Mechanical Shape Correlation: An Integrated Image Correlation Approach -- Chapter9. On the Boundary Conditions and Optimization Methods in Integrated Digital Image Correlation -- Chapter10. Extension of the Monogenic Phasor Meth od To Extract Displacements and Their Derivatives From 3-D Fringe Patterns -- Chapter11. Deformation Measurement within a Volume of Translucent Yield Stress Material Using Digital Image Correlation -- Chapter12. Surface Deformation with Simultaneous Contact area Measurement for Soft Transparent Media due to Spherical Contact -- Chapter13. Towards Measuring Intergranular Force Transmission Using Confocal Microscopy and Digital Volume Correlation -- Chapter14. Using Anti-Aliasing Camera Filters for DIC:  Does it Make a Difference? -- Chapter15. Investigation of Electronic Speckle Pattern Interferometry with Line Laser Scanning for Large Area Deformation Measurement -- Chapter16. Internal Heat Generation in Dynamic Tension Tests of AISI 316 using Full-Field Temperature and Strain Measurements -- Chapter17. A Short Survey on Residual Stress Measurements by HDM and ESPI -- Chapter18. Feasibility of Using Fringe Projection System for Corrosion Monitoring in Metals of Interest in Cultural Heritage. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Advancement of Optical Methods in Experimental Mechanics, Volume 3 : Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics [documento electrónico] / Lamberti, Luciano, ; Lin, Ming-Tzer, ; Furlong, Cosme, ; Sciammarella, Cesar, . - 1 ed. . - [s.l.] : Springer, 2018 . - VIII, 118 p. 109 ilustraciones, 82 ilustraciones en color.
ISBN : 978-3-319-63028-1
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Mecánica Aplicada Material Análisis de espectro Láseres IngenierÃa Mecánica Caracterización y Técnica AnalÃtica Espectroscopia Láser Clasificación: Resumen: Avance de métodos ópticos en mecánica experimental, volumen 3 de las actas de la conferencia y exposición anual SEM de 2017 sobre mecánica experimental y aplicada, el tercer volumen de nueve de la conferencia, reúne contribuciones a esta importante área de investigación e ingenierÃa. La colección presenta hallazgos iniciales y estudios de casos sobre una amplia gama de métodos ópticos que van desde la fotoelasticidad e interferometrÃa tradicionales hasta técnicas DIC y DVC más recientes, e incluye artÃculos en las siguientes áreas de investigación técnica general. Nota de contenido: Chapter1. A New Method for Improving Measurement Accuracy of Digital Image Correlation -- Chapter2. Fatigue Analysis of 7075 Aluminum Alloy by Optoacoustic Method -- Chapter3. Early Strain Localization in Strong Work Hardening Aluminium Alloy (2198 T3): 3D Laminography and DVC Measurement -- Chapter4. On the In-Plane Displacement Measurement by 3D Digital Image Correlation Method -- Chapter5. Noise Reduction in Amplitude-Fluctuation Electronic Speckle-Pattern Interferometry -- Chapter6. Evaluating Path of Stress Triaxiality to Fracture of Thin Steel Sheet Using Stereovision -- Chapter7. Studying with a Full-Field Measurement Technique the Local Response of Asphalt Specimens Subjected to Freeze-Thaw Cycles -- Chapter8. Mechanical Shape Correlation: An Integrated Image Correlation Approach -- Chapter9. On the Boundary Conditions and Optimization Methods in Integrated Digital Image Correlation -- Chapter10. Extension of the Monogenic Phasor Meth od To Extract Displacements and Their Derivatives From 3-D Fringe Patterns -- Chapter11. Deformation Measurement within a Volume of Translucent Yield Stress Material Using Digital Image Correlation -- Chapter12. Surface Deformation with Simultaneous Contact area Measurement for Soft Transparent Media due to Spherical Contact -- Chapter13. Towards Measuring Intergranular Force Transmission Using Confocal Microscopy and Digital Volume Correlation -- Chapter14. Using Anti-Aliasing Camera Filters for DIC:  Does it Make a Difference? -- Chapter15. Investigation of Electronic Speckle Pattern Interferometry with Line Laser Scanning for Large Area Deformation Measurement -- Chapter16. Internal Heat Generation in Dynamic Tension Tests of AISI 316 using Full-Field Temperature and Strain Measurements -- Chapter17. A Short Survey on Residual Stress Measurements by HDM and ESPI -- Chapter18. Feasibility of Using Fringe Projection System for Corrosion Monitoring in Metals of Interest in Cultural Heritage. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Advancements in Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 : Proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics Tipo de documento: documento electrónico Autores: Lin, Ming-Tzer, ; Sciammarella, Cesar, ; Espinosa, Horacio D., ; Furlong, Cosme, ; Lamberti, Luciano, ; Reu, Phillip, ; Sutton, Michael, ; Hwang, Chi-Hung, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2020 Número de páginas: VIII, 129 p. 113 ilustraciones, 95 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-30009-8 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Mecánica Aplicada Material Láseres Visión por computador IngenierÃa Mecánica Caracterización y Técnica AnalÃtica Láser Clasificación: Resumen: Avance de los métodos ópticos y la correlación de imágenes digitales en la mecánica experimental, volumen 3 de las actas de la conferencia y exposición anual SEM de 2019 sobre mecánica experimental y aplicada, el tercer volumen de seis de la conferencia, reúne contribuciones a esta importante área de investigación y ingenierÃa. La colección presenta los primeros hallazgos y estudios de casos sobre una amplia gama de métodos ópticos que van desde la fotoelasticidad y la interferometrÃa tradicionales hasta técnicas DIC y DVC más recientes, e incluye artÃculos en las siguientes áreas de investigación técnica general: Métodos DIC y sus aplicaciones Aplicaciones de fotoelsticidad e interferometrÃa Micro -Óptica y Sistemas Microscópicos Multiescala y Nuevos Desarrollos en Métodos Ópticos DIC y sus Aplicaciones para Problemas Inversos. Nota de contenido: 1. Digital Projection Speckle Technique for Fringe Generation -- 2. Quantifying Wrinkling During Tow Placement On Curvilinear Paths -- 3. Experimental Mechanics, Tool to Verify Continuum Mechanics Predictions -- 4. Study the Deformation of Solid Cylindrical Specimens under Torsion using 360o DIC -- 5. Mutiscale XCT Scans to Study Damage Mechanism in Syntactic Foam -- 6. An Investigation of Digital Image Correlation Technique for Earth Materials -- 7. Dynamics of Deformation-to-Fracture Transition Based on Wave Theory -- 8. Fatigue Monitoring of Dented Pipeline Specimens using Infrared Thermography, DIC and Fiber Optic Strain Gages -- 9. Development of Optical Technique for Measuring Kinematic Fields in Presence of Cracks, FIB-SEM-DIC -- 10. DIC Determination of SIF in Orthotropic Composite -- 11. Determining In-plane Displacement by Combining DIC Method and Plenoptic Camera Built-in Changing Focal Distance Function -- 12. Identification of Interparticle Contacts in Granular Media using Mechanoluminescent Material -- 13. Color Transfer in Twelve Fringe Photoelasticity (TFP) -- 14. Infrared Deflectometry -- 15. Real-time Shadow Moiré Measurement by Two Light Sources -- 16. Study of MRI Compatible Piezoelectric Motor by Finite Element Modeling and High-Speed Digital Holography -- 17. Digital Volume Correlation: Progress and Challenges -- 18. Development of Camera Calibration-free 3D Shape Measurement Using Feature Quantity Type Whole-Space Tabulation Method -- 19. Temporal Phase Unwrapping for High-Speed Holographic Shape Measurements of Geometrically Discontinuous Objects -- 20. Projection-based Measurement and Identification. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Advancements in Optical Methods & Digital Image Correlation in Experimental Mechanics, Volume 3 : Proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics [documento electrónico] / Lin, Ming-Tzer, ; Sciammarella, Cesar, ; Espinosa, Horacio D., ; Furlong, Cosme, ; Lamberti, Luciano, ; Reu, Phillip, ; Sutton, Michael, ; Hwang, Chi-Hung, . - 1 ed. . - [s.l.] : Springer, 2020 . - VIII, 129 p. 113 ilustraciones, 95 ilustraciones en color.
ISBN : 978-3-030-30009-8
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Mecánica Aplicada Material Láseres Visión por computador IngenierÃa Mecánica Caracterización y Técnica AnalÃtica Láser Clasificación: Resumen: Avance de los métodos ópticos y la correlación de imágenes digitales en la mecánica experimental, volumen 3 de las actas de la conferencia y exposición anual SEM de 2019 sobre mecánica experimental y aplicada, el tercer volumen de seis de la conferencia, reúne contribuciones a esta importante área de investigación y ingenierÃa. La colección presenta los primeros hallazgos y estudios de casos sobre una amplia gama de métodos ópticos que van desde la fotoelasticidad y la interferometrÃa tradicionales hasta técnicas DIC y DVC más recientes, e incluye artÃculos en las siguientes áreas de investigación técnica general: Métodos DIC y sus aplicaciones Aplicaciones de fotoelsticidad e interferometrÃa Micro -Óptica y Sistemas Microscópicos Multiescala y Nuevos Desarrollos en Métodos Ópticos DIC y sus Aplicaciones para Problemas Inversos. Nota de contenido: 1. Digital Projection Speckle Technique for Fringe Generation -- 2. Quantifying Wrinkling During Tow Placement On Curvilinear Paths -- 3. Experimental Mechanics, Tool to Verify Continuum Mechanics Predictions -- 4. Study the Deformation of Solid Cylindrical Specimens under Torsion using 360o DIC -- 5. Mutiscale XCT Scans to Study Damage Mechanism in Syntactic Foam -- 6. An Investigation of Digital Image Correlation Technique for Earth Materials -- 7. Dynamics of Deformation-to-Fracture Transition Based on Wave Theory -- 8. Fatigue Monitoring of Dented Pipeline Specimens using Infrared Thermography, DIC and Fiber Optic Strain Gages -- 9. Development of Optical Technique for Measuring Kinematic Fields in Presence of Cracks, FIB-SEM-DIC -- 10. DIC Determination of SIF in Orthotropic Composite -- 11. Determining In-plane Displacement by Combining DIC Method and Plenoptic Camera Built-in Changing Focal Distance Function -- 12. Identification of Interparticle Contacts in Granular Media using Mechanoluminescent Material -- 13. Color Transfer in Twelve Fringe Photoelasticity (TFP) -- 14. Infrared Deflectometry -- 15. Real-time Shadow Moiré Measurement by Two Light Sources -- 16. Study of MRI Compatible Piezoelectric Motor by Finite Element Modeling and High-Speed Digital Holography -- 17. Digital Volume Correlation: Progress and Challenges -- 18. Development of Camera Calibration-free 3D Shape Measurement Using Feature Quantity Type Whole-Space Tabulation Method -- 19. Temporal Phase Unwrapping for High-Speed Holographic Shape Measurements of Geometrically Discontinuous Objects -- 20. Projection-based Measurement and Identification. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Emerging Challenges for Experimental Mechanics in Energy and Environmental Applications, Proceedings of the 5th International Symposium on Experimental Mechanics and 9th Symposium on Optics in Industry (ISEM-SOI), 2015 Tipo de documento: documento electrónico Autores: MartÃnez-GarcÃa, Amalia, ; Furlong, Cosme, ; Barrientos, Bernardino, ; Pryputniewicz, Ryszard J., Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2017 Número de páginas: X, 372 p. 343 ilustraciones, 216 ilustraciones en color. ISBN/ISSN/DL: 978-3-319-28513-9 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Palabras clave: Mecánica Aplicada Material Electric power production IngenierÃa Mecánica Caracterización y Técnica AnalÃtica IngenierÃa de EnergÃa Eléctrica IngenierÃa Mecánica Energética Clasificación: Resumen: Este libro contiene artÃculos del 5º Simposio Internacional sobre Mecánica Experimental (5-ISEM) y el 9º Simposio sobre Óptica en la Industria (9-SOI), cuyo tema general es DesafÃos emergentes para la mecánica experimental en aplicaciones energéticas y ambientales. Estos simposios son organizados por el Centro de Investigaciones en Óptica (CIO) y la Academia Mexicana de Óptica (AMO), con el patrocinio de la Sociedad de Mecánica Experimental (SEM) y otros Organismos nacionales e internacionales; Los simposios son foros interdisciplinarios para ingenieros, técnicos, investigadores y directivos involucrados en todos los campos de la Óptica, Opto-mecatrónica, Mecánica e IngenierÃa Mecánica. · Se dirige a un amplio público de lectores, incluidos estudiantes de grado y posgrado, investigadores e ingenieros que trabajan en mecánica experimental y en la aplicación de métodos ópticos · Cubre un amplio espectro de temas que destacan el uso de métodos ópticos en mecánica experimental, energÃa y medio ambiente. Nota de contenido: TOC Martinez-Garcia Optical Imaging through Horizontal-Path Turbulence: A New Solution to a Difficult Problem -- Aluminum Strain Measurement by Beam Propagation -- The Technique of Laser-Induced Breakdown Spectroscopy for Determination of Heavy Metals in the Receiving Body of Water -- Applications of Laser Induced Breakdown Spectroscopy in the Identification of Bacteria -- Residual Stresses Measurement by the Hole-Drilling Technique and DSPI using the Integral Method with Displacement Coefficients -- On the separation of complete triaxial strain/stress profiles from diffraction experiments -- Quantification of slow mechanical displacements in metal samples by optical polarization phase shift DSPI -- Comparative analysis of optoelectronic properties of glucose for non-invasive monitoring -- Phase Shifting Interferometry using a coupled cyclic path interferometers -- Identification of microorganisms using digital holographic microscopy -- Noise reduction in off-axis digital holography reconstruction from two reconstruction distances based on Talbot effect -- Study of temperature distribution over a Stirling engine by using the Schlieren technique -- On Axis Fringe Projection -- Instrument for recording Purkinje images -- Ultrasonic Arc Maps and its potential application in non-destructive testing -- Phase-shifting generated by wavelength modulation by means of switching on-off a laser diode -- Index refraction measurements in liquid substances of full field using holographic interferometry -- Geometrical thickness measurement of thin films by a transmitted Gaussian beam -- Topography and color study of an object using fringe projection and colorimetry techniques -- Temperature measurement of a synthetic jet produced by a Helmholtz cavity -- Gates' interferometer as fringe projection system for recovering 3D shapes -- Development of an automated Laser Induced Breakdown Spectroscopy system for compositional mapping of surfaces -- Artificial visual system used for dental fluorosis discrimination -- Inspection of Laser Ablated Transparent Conductive Oxide Thin Films by a Multifunction Optical Measurement System -- LIBS technique for identification of crude oils -- 3D Displacement Distribution Measurement Using Sampling Moire Method with Multiple Cameras -- Automatic Generation of Codes for Routine of CNC Machining Based on Three-Dimensional Information Obtained by Fringe Projection -- Automatic Generation of Movement Sequences to Robotic Arm Based on Three-Dimensional Data Obtained through Fringe Projection Technique -- Application of optomecatronic load cell for measuring work force and efforts in industrial machinery -- ASE Noise Attenuation for Signal at 1548.4 nm throught a Sagnac Interferometer using High-Birefingence Fiber which is Subjected to Temperature Changes -- Single-shot Phase shifting interferometry for microscopic measurements of non-birefringent transmissive phase samples -- Design of a customized myoelectric hand prosthesis -- Finite element static analysis simulation for a grain dispenser mechanism -- Controlling Bounce of Vacuum Circuit Breakers' Contacts -- Experimental and Numerical Investigation of Effects of Fiber Orientation of Wood Stiffness -- Auto-calibration and micro-flow injection procedure based on automated hydrodynamic system for spectrophotometric determination of cobalt -- Mathematical Model to Predict the Stress Concentration Factor on a Notched Flat Bar in Axial Tension -- Mechanical implementation of Kinematic Synergy for multi-point grasping -- Cascaded ultra-low reflective fiber points for distributed sensing -- Object surface representation via NURBS and genetic algorithms with SBX -- Photo-Oxidation of Polystyrene Film Irradiated With UV-B -- Dynamic analysis of trawl doors applied in bottom trawls to catch shrimp -- Simulator of an Adaptive Optics System Using Matlab -- Design, development and validation of an Artificial Muscle Biomechanical Rig (AMBR) for Finite Element model validation -- Application of laser light on the development of equipment for the study of proteins -- Organic Solar Photovoltaic cells -- Fiber Bragg Gires-Tournois interferometer etalons as fiber sensor -- Cleaning of Tantalum capacitor electrode surface by laser in multipulse regime -- High quality polishing procedure of glass substrates: application in integrated optics. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Emerging Challenges for Experimental Mechanics in Energy and Environmental Applications, Proceedings of the 5th International Symposium on Experimental Mechanics and 9th Symposium on Optics in Industry (ISEM-SOI), 2015 [documento electrónico] / MartÃnez-GarcÃa, Amalia, ; Furlong, Cosme, ; Barrientos, Bernardino, ; Pryputniewicz, Ryszard J., . - 1 ed. . - [s.l.] : Springer, 2017 . - X, 372 p. 343 ilustraciones, 216 ilustraciones en color.
ISBN : 978-3-319-28513-9
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Palabras clave: Mecánica Aplicada Material Electric power production IngenierÃa Mecánica Caracterización y Técnica AnalÃtica IngenierÃa de EnergÃa Eléctrica IngenierÃa Mecánica Energética Clasificación: Resumen: Este libro contiene artÃculos del 5º Simposio Internacional sobre Mecánica Experimental (5-ISEM) y el 9º Simposio sobre Óptica en la Industria (9-SOI), cuyo tema general es DesafÃos emergentes para la mecánica experimental en aplicaciones energéticas y ambientales. Estos simposios son organizados por el Centro de Investigaciones en Óptica (CIO) y la Academia Mexicana de Óptica (AMO), con el patrocinio de la Sociedad de Mecánica Experimental (SEM) y otros Organismos nacionales e internacionales; Los simposios son foros interdisciplinarios para ingenieros, técnicos, investigadores y directivos involucrados en todos los campos de la Óptica, Opto-mecatrónica, Mecánica e IngenierÃa Mecánica. · Se dirige a un amplio público de lectores, incluidos estudiantes de grado y posgrado, investigadores e ingenieros que trabajan en mecánica experimental y en la aplicación de métodos ópticos · Cubre un amplio espectro de temas que destacan el uso de métodos ópticos en mecánica experimental, energÃa y medio ambiente. Nota de contenido: TOC Martinez-Garcia Optical Imaging through Horizontal-Path Turbulence: A New Solution to a Difficult Problem -- Aluminum Strain Measurement by Beam Propagation -- The Technique of Laser-Induced Breakdown Spectroscopy for Determination of Heavy Metals in the Receiving Body of Water -- Applications of Laser Induced Breakdown Spectroscopy in the Identification of Bacteria -- Residual Stresses Measurement by the Hole-Drilling Technique and DSPI using the Integral Method with Displacement Coefficients -- On the separation of complete triaxial strain/stress profiles from diffraction experiments -- Quantification of slow mechanical displacements in metal samples by optical polarization phase shift DSPI -- Comparative analysis of optoelectronic properties of glucose for non-invasive monitoring -- Phase Shifting Interferometry using a coupled cyclic path interferometers -- Identification of microorganisms using digital holographic microscopy -- Noise reduction in off-axis digital holography reconstruction from two reconstruction distances based on Talbot effect -- Study of temperature distribution over a Stirling engine by using the Schlieren technique -- On Axis Fringe Projection -- Instrument for recording Purkinje images -- Ultrasonic Arc Maps and its potential application in non-destructive testing -- Phase-shifting generated by wavelength modulation by means of switching on-off a laser diode -- Index refraction measurements in liquid substances of full field using holographic interferometry -- Geometrical thickness measurement of thin films by a transmitted Gaussian beam -- Topography and color study of an object using fringe projection and colorimetry techniques -- Temperature measurement of a synthetic jet produced by a Helmholtz cavity -- Gates' interferometer as fringe projection system for recovering 3D shapes -- Development of an automated Laser Induced Breakdown Spectroscopy system for compositional mapping of surfaces -- Artificial visual system used for dental fluorosis discrimination -- Inspection of Laser Ablated Transparent Conductive Oxide Thin Films by a Multifunction Optical Measurement System -- LIBS technique for identification of crude oils -- 3D Displacement Distribution Measurement Using Sampling Moire Method with Multiple Cameras -- Automatic Generation of Codes for Routine of CNC Machining Based on Three-Dimensional Information Obtained by Fringe Projection -- Automatic Generation of Movement Sequences to Robotic Arm Based on Three-Dimensional Data Obtained through Fringe Projection Technique -- Application of optomecatronic load cell for measuring work force and efforts in industrial machinery -- ASE Noise Attenuation for Signal at 1548.4 nm throught a Sagnac Interferometer using High-Birefingence Fiber which is Subjected to Temperature Changes -- Single-shot Phase shifting interferometry for microscopic measurements of non-birefringent transmissive phase samples -- Design of a customized myoelectric hand prosthesis -- Finite element static analysis simulation for a grain dispenser mechanism -- Controlling Bounce of Vacuum Circuit Breakers' Contacts -- Experimental and Numerical Investigation of Effects of Fiber Orientation of Wood Stiffness -- Auto-calibration and micro-flow injection procedure based on automated hydrodynamic system for spectrophotometric determination of cobalt -- Mathematical Model to Predict the Stress Concentration Factor on a Notched Flat Bar in Axial Tension -- Mechanical implementation of Kinematic Synergy for multi-point grasping -- Cascaded ultra-low reflective fiber points for distributed sensing -- Object surface representation via NURBS and genetic algorithms with SBX -- Photo-Oxidation of Polystyrene Film Irradiated With UV-B -- Dynamic analysis of trawl doors applied in bottom trawls to catch shrimp -- Simulator of an Adaptive Optics System Using Matlab -- Design, development and validation of an Artificial Muscle Biomechanical Rig (AMBR) for Finite Element model validation -- Application of laser light on the development of equipment for the study of proteins -- Organic Solar Photovoltaic cells -- Fiber Bragg Gires-Tournois interferometer etalons as fiber sensor -- Cleaning of Tantalum capacitor electrode surface by laser in multipulse regime -- High quality polishing procedure of glass substrates: application in integrated optics. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
