Información del autor
Autor Neelameggham, Neale R. |
Documentos disponibles escritos por este autor (14)
Crear una solicitud de compra Refinar búsquedaEnergy Technology 2017 / Zhang, Lei ; Drelich, Jaroslaw W. ; Neelameggham, Neale R. ; Guillen, Donna Post ; Haque, Nawshad ; Zhu, Jingxi ; Sun, Ziqi ; Wang, Tao ; Howarter, John A. ; Tesfaye, Fiseha ; Ikhmayies, Shadia ; Olivetti, Elsa ; Kennedy, Mark William
TÃtulo : Energy Technology 2017 : Carbon Dioxide Management and Other Technologies Tipo de documento: documento electrónico Autores: Zhang, Lei, ; Drelich, Jaroslaw W., ; Neelameggham, Neale R., ; Guillen, Donna Post, ; Haque, Nawshad, ; Zhu, Jingxi, ; Sun, Ziqi, ; Wang, Tao, ; Howarter, John A., ; Tesfaye, Fiseha, ; Ikhmayies, Shadia, ; Olivetti, Elsa, ; Kennedy, Mark William, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2017 Número de páginas: XXII, 499 p. 244 ilustraciones ISBN/ISSN/DL: 978-3-319-52192-3 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: Materiales Catálisis Fuerza y ​​energÃa Material Fuentes de energÃa renovable Materiales para EnergÃa y Catálisis Caracterización y Técnica AnalÃtica EnergÃa renovable Clasificación: 620.1 Resumen: Esta colección se centra en tecnologÃas energéticamente eficientes, incluido el beneficio innovador de minerales, tecnologÃas de fundición, reciclaje y recuperación de calor residual. El volumen también cubre varios aspectos tecnológicos de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. ArtÃculos que abordan recursos energéticos renovables para la producción de metales y materiales, recuperación de calor residual y otras tecnologÃas industriales energéticamente eficientes, nuevos conceptos o dispositivos para la generación y conversión de energÃa, mejora de la eficiencia energética en la ingenierÃa de procesos, sostenibilidad y evaluación del ciclo de vida de los sistemas energéticos, asà como Se incluye la termodinámica y modelado para procesos metalúrgicos sustentables. Este volumen también ofrece temas sobre el secuestro de CO2 y la reducción de las emisiones de gases de efecto invernadero procedentes de la ingenierÃa de procesos, las tecnologÃas sostenibles en la metalurgia extractiva, asà como las industrias de procesamiento y fabricación de materiales con menor consumo de energÃa y emisiones de CO2. También se incluyen en este volumen las contribuciones de todos los ámbitos de las fuentes de energÃa no nuclear y no tradicional, como la solar, la eólica y la biomasa. Los artÃculos de los siguientes simposios se presentan en el libro: TecnologÃas energéticas Avances en tecnologÃas ambientales: sesión conjunta sobre reciclaje y sostenibilidad Derivación del valor de materiales de desecho desafiantes: sesión conjunta sobre reciclaje y sostenibilidad Silicio de células solares. Nota de contenido: Part 1: Energy Technologies: Energy Technologies -- Continuous optimization of the energy input – The success story of AOS -- Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes -- Transforming the way electricity is consumed during the aluminium smelting process -- The thermodynamics of slag forming inorganic phases in biomass combustion processes -- Leaching of Sb from TROF furnace Doré Slag -- Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors -- Part 3: Energy Technologies: Novel Technologies -- Modeling Anthropogenic Heat Flux in Climate Models -- In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications -- Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method -- Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement -- Part 4: Energy Technologies: Heat Recovery -- Integrated utilization of sewage sludge and coal gangue in clinker manufacture -- Valuable metals and energy recovery from electronic waste streams -- Dry Granulation of Hot Metal and Heat Recovery from Off-Gas -- Energy Recovery of Livestock Waste in Taiwan -- Life cycle assessments of incineration treatment for sharp medical waste -- Part 5: Energy Technologies: Poster Session -- Effect of granularity on pretreatment of coke with microwave irradiation -- Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal -- Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere -- Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I -- Maximizing the values of steelmaking slags -- Recycling of zinc from the steelmaking dust in the sintering process -- Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method -- Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II -- Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics -- Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review -- Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III -- Chromium removal from iron-rich waste generated during processing lateritic nickel ores -- Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization -- Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination -- Thermodynamic analysis of the recycling of aircraft Al alloys -- Lithium-ion Battery Recycling Through Secondary Aluminum Production -- Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session -- Alternative method for materials separa-tion from crystalline silicon photovoltaic modules -- Bioleaching process for metal recovery from waste materials -- Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil -- Preparing ferrosilicon alloy with copper slag -- Research on Optimization of Sintering Mixture with Low-grade Complex Ore -- Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties -- Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore -- Phase Analysis of the Si-O2 System -- Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan -- Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining -- Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment -- Evaporation removal of boron in molten silicon using reactive fluxes -- Part 12: Solar Cell Silicon: Silicon Photovoltaics -- Electrodynamic Eddy Current Separation of End-of-Life PV Materials -- Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells -- Influence of Oxygen Content on the Wettability of Silicon on Graphite -- Particle Separation in Silicon Ingot Casting Using AC Magnetic Field -- Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty -- Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10 -- Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery -- Accelerating life-cycle management protocols for new generation batteries -- Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques -- The use of rice husk ash as an aggregate for foundry sand mould production -- Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session -- Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange -- Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane -- Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments. Tipo de medio : Computadora Summary : This collection focuses on energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The volume also covers various technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Papers addressing renewable energy resources for metals and materials production, waste heat recovery and other industrial energy efficient technologies, new concepts or devices for energy generation and conversion, energy efficiency improvement in process engineering, sustainability and life cycle assessment of energy systems, as well as the thermodynamics and modeling for sustainable metallurgical processes are included. This volume also offers topics on CO2 sequestration and reduction in greenhouse gas emissions from process engineering, sustainable technologies in extractive metallurgy,as well as the materials processing and manufacturing industries with reduced energy consumption and CO2 emission. Contributions from all areas of non-nuclear and non-traditional energy sources, such as solar, wind, and biomass are also included in this volume. Papers from the following symposia are presented in the book: Energy Technologies Advances in Environmental Technologies: Recycling and Sustainability Joint Session Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session Solar Cell Silicon. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Energy Technology 2017 : Carbon Dioxide Management and Other Technologies [documento electrónico] / Zhang, Lei, ; Drelich, Jaroslaw W., ; Neelameggham, Neale R., ; Guillen, Donna Post, ; Haque, Nawshad, ; Zhu, Jingxi, ; Sun, Ziqi, ; Wang, Tao, ; Howarter, John A., ; Tesfaye, Fiseha, ; Ikhmayies, Shadia, ; Olivetti, Elsa, ; Kennedy, Mark William, . - 1 ed. . - [s.l.] : Springer, 2017 . - XXII, 499 p. 244 ilustraciones.
ISBN : 978-3-319-52192-3
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: Materiales Catálisis Fuerza y ​​energÃa Material Fuentes de energÃa renovable Materiales para EnergÃa y Catálisis Caracterización y Técnica AnalÃtica EnergÃa renovable Clasificación: 620.1 Resumen: Esta colección se centra en tecnologÃas energéticamente eficientes, incluido el beneficio innovador de minerales, tecnologÃas de fundición, reciclaje y recuperación de calor residual. El volumen también cubre varios aspectos tecnológicos de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. ArtÃculos que abordan recursos energéticos renovables para la producción de metales y materiales, recuperación de calor residual y otras tecnologÃas industriales energéticamente eficientes, nuevos conceptos o dispositivos para la generación y conversión de energÃa, mejora de la eficiencia energética en la ingenierÃa de procesos, sostenibilidad y evaluación del ciclo de vida de los sistemas energéticos, asà como Se incluye la termodinámica y modelado para procesos metalúrgicos sustentables. Este volumen también ofrece temas sobre el secuestro de CO2 y la reducción de las emisiones de gases de efecto invernadero procedentes de la ingenierÃa de procesos, las tecnologÃas sostenibles en la metalurgia extractiva, asà como las industrias de procesamiento y fabricación de materiales con menor consumo de energÃa y emisiones de CO2. También se incluyen en este volumen las contribuciones de todos los ámbitos de las fuentes de energÃa no nuclear y no tradicional, como la solar, la eólica y la biomasa. Los artÃculos de los siguientes simposios se presentan en el libro: TecnologÃas energéticas Avances en tecnologÃas ambientales: sesión conjunta sobre reciclaje y sostenibilidad Derivación del valor de materiales de desecho desafiantes: sesión conjunta sobre reciclaje y sostenibilidad Silicio de células solares. Nota de contenido: Part 1: Energy Technologies: Energy Technologies -- Continuous optimization of the energy input – The success story of AOS -- Part 2: Energy Technologies: CO2 Management and Sustainable Metallurgical Processes -- Transforming the way electricity is consumed during the aluminium smelting process -- The thermodynamics of slag forming inorganic phases in biomass combustion processes -- Leaching of Sb from TROF furnace Doré Slag -- Potential CO2 emission reduction and H2 production using industrial slag wastes originating from different industrial sectors -- Part 3: Energy Technologies: Novel Technologies -- Modeling Anthropogenic Heat Flux in Climate Models -- In-situ microscopic study of morphology changes in natural hematite and Cu-spinel particles during cyclic redox gas exposures for chemical looping applications -- Thermodynamic stability of condensed phases in the ternary system CaO-Cu-O by the EMF method -- Experimental Study on Electro-spraying of Ethanol Based on PDA Measurement -- Part 4: Energy Technologies: Heat Recovery -- Integrated utilization of sewage sludge and coal gangue in clinker manufacture -- Valuable metals and energy recovery from electronic waste streams -- Dry Granulation of Hot Metal and Heat Recovery from Off-Gas -- Energy Recovery of Livestock Waste in Taiwan -- Life cycle assessments of incineration treatment for sharp medical waste -- Part 5: Energy Technologies: Poster Session -- Effect of granularity on pretreatment of coke with microwave irradiation -- Effect of Microwave and ultrasonic coupling treatment on granularity and microstructure of Pulverized Coal -- Influence of Sodium on Coke Microstructure in Different Reaction Atmosphere -- Part 6: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste I -- Maximizing the values of steelmaking slags -- Recycling of zinc from the steelmaking dust in the sintering process -- Direct Preparation of Metal Doping Ni-Zn Ferrite from Zn-containing Electric Arc Furnace Dust by Calcination Method -- Part 7: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste II -- Synthesis and Characterization of Ferrochromium Slag Based Glass-ceramics -- Hydrometallurgical processing of copper smelter dust for copper recovery as nanoparticles: a review -- Part 8: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Deriving Value from Challenging Waste III -- Chromium removal from iron-rich waste generated during processing lateritic nickel ores -- Removal of Magnesium from Liquor Produced by Nickel Mining by Crystallization -- Synthesis of Magnesium Oxide from Ferronickel Smelting Slag through Hydrochloric Acid Leaching-Precipitation and Calcination -- Thermodynamic analysis of the recycling of aircraft Al alloys -- Lithium-ion Battery Recycling Through Secondary Aluminum Production -- Part 9: Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session: Poster Session -- Alternative method for materials separa-tion from crystalline silicon photovoltaic modules -- Bioleaching process for metal recovery from waste materials -- Chemical Analysis of Sludge Originating from Industrial Painting Performed in Brazil -- Preparing ferrosilicon alloy with copper slag -- Research on Optimization of Sintering Mixture with Low-grade Complex Ore -- Part 10: Solar Cell Silicon: Silicon Production, Crystallization, and Properties -- Study on Producing Solar Grade Silicon by Carbothermal Reduction of Andalusite Ore -- Phase Analysis of the Si-O2 System -- Characterization of Composition, Morphology, and Structure of Disi Raw Sandstones in Jordan -- Part 11: Solar Cell Silicon: Silicon Impurity Removal and Refining -- Effect of magnesium addition on removal of impurities from silicon by hydrometallurgical treatment -- Evaporation removal of boron in molten silicon using reactive fluxes -- Part 12: Solar Cell Silicon: Silicon Photovoltaics -- Electrodynamic Eddy Current Separation of End-of-Life PV Materials -- Investigation on Quartz Crucibles for Monocrystalline Silicon Ingots for Solar Cells -- Influence of Oxygen Content on the Wettability of Silicon on Graphite -- Particle Separation in Silicon Ingot Casting Using AC Magnetic Field -- Part 13: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Advances in Environmental Technologies: Characterization and Uncertainty -- Characteristics of Municipal Solid Waste Incineration Bottom Ash with Particulate Matters PM2.5 ~PM10 -- Part 14: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: New Areas of Value Recovery -- Accelerating life-cycle management protocols for new generation batteries -- Recovery of Metals and Nonmetals from Waste Printed Circuit Boards (PCBs) by Physical Recycling Techniques -- The use of rice husk ash as an aggregate for foundry sand mould production -- Part 15: Advances in Environmental Technologies: Recycling and Sustainability Joint Session: Poster Session -- Chemical reduction of Fe(III) in nickel lateritic wastewater to recover metals by ion exchange -- Chronopotentiometry applied to the determination of copper transport properties through a cation-exchange membrane -- Effect of flow rate on metals adsorption of synthetic solution using chelating resin Dowex XUS43605 in column experiments. Tipo de medio : Computadora Summary : This collection focuses on energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The volume also covers various technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Papers addressing renewable energy resources for metals and materials production, waste heat recovery and other industrial energy efficient technologies, new concepts or devices for energy generation and conversion, energy efficiency improvement in process engineering, sustainability and life cycle assessment of energy systems, as well as the thermodynamics and modeling for sustainable metallurgical processes are included. This volume also offers topics on CO2 sequestration and reduction in greenhouse gas emissions from process engineering, sustainable technologies in extractive metallurgy,as well as the materials processing and manufacturing industries with reduced energy consumption and CO2 emission. Contributions from all areas of non-nuclear and non-traditional energy sources, such as solar, wind, and biomass are also included in this volume. Papers from the following symposia are presented in the book: Energy Technologies Advances in Environmental Technologies: Recycling and Sustainability Joint Session Deriving Value from Challenging Waste Materials: Recycling and Sustainability Joint Session Solar Cell Silicon. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Energy Technology 2018 : Carbon Dioxide Management and Other Technologies Tipo de documento: documento electrónico Autores: Sun, Ziqi, ; Wang, Cong, ; Guillen, Donna Post, ; Neelameggham, Neale R., ; Zhang, Lei, ; Howarter, John A., ; Wang, Tao, ; Olivetti, Elsa, ; Zhang, Mingming, ; Verhulst, Dirk, ; Guan, Xiaofei, ; Anderson, Allie, ; Ikhmayies, Shadia, ; Smith, York R., ; Pandey, Amit, ; Pisupati, Sarma, ; Lu, Huimin, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2018 Número de páginas: XXVI, 618 p. 326 ilustraciones ISBN/ISSN/DL: 978-3-319-72362-4 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: Materiales Catálisis Fuerza y ​​energÃa Material Fuentes de energÃa renovable Materiales para EnergÃa y Catálisis Caracterización y Técnica AnalÃtica EnergÃa renovable Clasificación: 620.1 Resumen: Esta colección se centra en tecnologÃas energéticamente eficientes, incluido el beneficio innovador de minerales, tecnologÃas de fundición, reciclaje y recuperación de calor residual. El volumen también cubre varios aspectos tecnológicos de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. ArtÃculos que abordan recursos energéticos renovables para la producción de metales y materiales, recuperación de calor residual y otras tecnologÃas industriales energéticamente eficientes, nuevos conceptos o dispositivos para la generación y conversión de energÃa, mejora de la eficiencia energética en la ingenierÃa de procesos, sostenibilidad y evaluación del ciclo de vida de los sistemas energéticos, asà como Se incluye la termodinámica y modelado para procesos metalúrgicos sustentables. Este volumen también incluye temas sobre el secuestro de CO2 y la reducción de las emisiones de gases de efecto invernadero procedentes de la ingenierÃa de procesos, las tecnologÃas sostenibles en la metalurgia extractiva, asà como las industrias de procesamiento y fabricación de materiales con menor consumo de energÃa y emisiones de CO2. También se incluyen en este volumen las contribuciones de todos los ámbitos de las fuentes de energÃa no nuclear y no tradicional, como la solar, la eólica y la biomasa. Los artÃculos de los siguientes simposios se presentan en el libro: TecnologÃas energéticas y gestión de CO2 Materiales avanzados para la conversión y el almacenamiento de energÃa Derivando valor de flujos de residuos desafiantes: Sesión conjunta sobre reciclaje y sostenibilidad EnergÃa renovable almacenada en silicio con células solares en carbón. Nota de contenido: Part 1. Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session -- Behavior of Co, Ni and Precious Metals in Copper Converting Process: Experimental Study -- Recycling of EAF Dust through Source Separation -- A Sustainable Methodology for Recycling Electric Arc Furnace Dust -- Thermal Separation and Leaching of Valuable Elements from Waste-derived Ashes -- Different Methods for the Characterization of Ash Compositions in Co-firing Boilers -- Utilization CFA-derived Tobermorite Fiber as Crystallization Revulsive in Autoclaved Concrete Block Production -- An Electrochemical Procedure for Copper Removal from Regenerated Pickling Solutions of Steel Plants -- Upgrading the Copper Value in a Waste Copper Smelter Dust Using the Falcon Concentrator -- Towards Commercialization of Indium Recovery from Waste Liquid Crystal Display Screens -- Engineering, Scientific, and Policy Inputs for Developing a Levelized Cost of Energy Storage Model -- Recovery of Gallium and Arsenic from Gallium Arsenide Semiconductor Scraps -- Rapid Removal of Pb(II) from Acid Wastewater using Vanadium Titanium-bearing Magnetite Particles Coated by Humic Acidcoated by humic acid(VTM-HA) Magnetic Particles -- Study on the Technology of Synthesizing MgAl2O4 Spinel Refractory Material from Waste Chromium Slag of a Certain Chrome Plant in China -- Effect of Ferrosilicon on Reduction of Cr2O3 in Steelmaking Slags -- Bacterial Degradation of Free Cyanide in Alkaline Medium Using Bacillus Licheniformis Strain -- Determination of Limiting Current Density of a Solution with Copper, Zinc and EDTA from the Effluent of Brass Electrodeposition -- Effect of the PH on the Recovery of Al3+, Co2+, Cr3+, Cu2+, Fe3+, Mg2+, Mn2+, Ni2+ and Zn2+ by Purolite S950 -- Evaluation of the Occurrence of Fouling and Scaling on the Membrane HDX 200 for the Treatment of the Effluent of Brass Electrodeposition with EDTA as Complexing Agent -- High Temperature Crystallization Kinetics of MgSO4.H2O -- Preparation of Glass-ceramic from Titanium-bearing Blast Furnace Slag by "Petrurgic" Method -- Recovery of Copper from Nickel Laterite Leach Waste by Chemical Reduction Using Sodium Dithionite -- Recovery of Nickel and Cobalt from a Waste Zone of Nickel Laterite Ore Using a Mixture of Extractants in Solvent Extraction Technique -- White Ordinary Portland Cement Paste with Iron Oxide Powders Containing Arsenic Contents -- Part 3. Solar Cell Silicon -- Three-Dimensional Crystal-Plasticity based Model for Intrinsic Stresses in Multi-Junction Photovoltaic -- A Review of Solar Silicon Recycling -- Thermo-Calc of the Phase Diagram of the Fe-Si System -- Crystal Growth Mechanism of Si in Hypereutectic Al-Si Melt during the Electromagnetic Directional Solidification -- Thermo-Calc of the Phase Diagram of Calcium Silicon (Ca-Si) System -- Leaching of Indium from ITO Present in Amorphous Silicon Photovoltaic Modules -- Part 4. Materials for Energy Conversion and Storage -- Direct Performance Simulation Based on the Microstructure of SOFC Electrodes: A Phase Field Approach -- Effect of Sonication Power on Al2O3 Coated LiNi0.5Mn0.3Co0.2O2 Cathode Material for LIB -- Effect of Nano-graphite Dispersion on the Thermal Solar Selective Absorbance of Polymeric-based Coating Material -- Synthesis of MoAlB Particulates and Their Porous Derivatives by Selective Deintercalation of Al from MoAlB -- A New Economical Method for Fabricating High-purity Bi2O3 via Extraction-precipitation Stripping and Post Annealing -- Part 5. Stored Renewable Energy in Coal -- Aluminum-silicon Alloys Prepared from High-aluminum Fly Ash to Extract Magnesium from Serpentine -- Organic Agriculture Using Biomaterial Coal -- Extraction and Production of Rare Earth Elements from Coal Seam Bedrock and Caprock -- Extraction and Thermal Dissolution of Low-rank Coal by N-methyl-2-pyrrolidinone -- Enhancement of Coal Nanostructure and Investigation of its Novel Properties. Tipo de medio : Computadora Summary : This collection focuses on energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The volume also covers various technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Papers addressing renewable energy resources for metals and materials production, waste heat recovery and other industrial energy efficient technologies, new concepts or devices for energy generation and conversion, energy efficiency improvement in process engineering, sustainability and life cycle assessment of energy systems, as well as the thermodynamics and modeling for sustainable metallurgical processes are included. This volume also includes topics on CO2 sequestration and reduction in greenhouse gas emissions from process engineering, sustainable technologies in extractive metallurgy, as well as the materials processing and manufacturing industries with reduced energy consumption and CO2 emission. Contributions from all areas of non-nuclear and non-traditional energy sources, such as solar, wind, and biomass are also included in this volume. Papers from the following symposia are presented in the book: Energy Technologies and CO2 Management Advanced Materials for Energy Conversion and Storage Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session Solar Cell Silicon Stored Renewable Energy in Coal. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Energy Technology 2018 : Carbon Dioxide Management and Other Technologies [documento electrónico] / Sun, Ziqi, ; Wang, Cong, ; Guillen, Donna Post, ; Neelameggham, Neale R., ; Zhang, Lei, ; Howarter, John A., ; Wang, Tao, ; Olivetti, Elsa, ; Zhang, Mingming, ; Verhulst, Dirk, ; Guan, Xiaofei, ; Anderson, Allie, ; Ikhmayies, Shadia, ; Smith, York R., ; Pandey, Amit, ; Pisupati, Sarma, ; Lu, Huimin, . - 1 ed. . - [s.l.] : Springer, 2018 . - XXVI, 618 p. 326 ilustraciones.
ISBN : 978-3-319-72362-4
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: Materiales Catálisis Fuerza y ​​energÃa Material Fuentes de energÃa renovable Materiales para EnergÃa y Catálisis Caracterización y Técnica AnalÃtica EnergÃa renovable Clasificación: 620.1 Resumen: Esta colección se centra en tecnologÃas energéticamente eficientes, incluido el beneficio innovador de minerales, tecnologÃas de fundición, reciclaje y recuperación de calor residual. El volumen también cubre varios aspectos tecnológicos de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. ArtÃculos que abordan recursos energéticos renovables para la producción de metales y materiales, recuperación de calor residual y otras tecnologÃas industriales energéticamente eficientes, nuevos conceptos o dispositivos para la generación y conversión de energÃa, mejora de la eficiencia energética en la ingenierÃa de procesos, sostenibilidad y evaluación del ciclo de vida de los sistemas energéticos, asà como Se incluye la termodinámica y modelado para procesos metalúrgicos sustentables. Este volumen también incluye temas sobre el secuestro de CO2 y la reducción de las emisiones de gases de efecto invernadero procedentes de la ingenierÃa de procesos, las tecnologÃas sostenibles en la metalurgia extractiva, asà como las industrias de procesamiento y fabricación de materiales con menor consumo de energÃa y emisiones de CO2. También se incluyen en este volumen las contribuciones de todos los ámbitos de las fuentes de energÃa no nuclear y no tradicional, como la solar, la eólica y la biomasa. Los artÃculos de los siguientes simposios se presentan en el libro: TecnologÃas energéticas y gestión de CO2 Materiales avanzados para la conversión y el almacenamiento de energÃa Derivando valor de flujos de residuos desafiantes: Sesión conjunta sobre reciclaje y sostenibilidad EnergÃa renovable almacenada en silicio con células solares en carbón. Nota de contenido: Part 1. Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session -- Behavior of Co, Ni and Precious Metals in Copper Converting Process: Experimental Study -- Recycling of EAF Dust through Source Separation -- A Sustainable Methodology for Recycling Electric Arc Furnace Dust -- Thermal Separation and Leaching of Valuable Elements from Waste-derived Ashes -- Different Methods for the Characterization of Ash Compositions in Co-firing Boilers -- Utilization CFA-derived Tobermorite Fiber as Crystallization Revulsive in Autoclaved Concrete Block Production -- An Electrochemical Procedure for Copper Removal from Regenerated Pickling Solutions of Steel Plants -- Upgrading the Copper Value in a Waste Copper Smelter Dust Using the Falcon Concentrator -- Towards Commercialization of Indium Recovery from Waste Liquid Crystal Display Screens -- Engineering, Scientific, and Policy Inputs for Developing a Levelized Cost of Energy Storage Model -- Recovery of Gallium and Arsenic from Gallium Arsenide Semiconductor Scraps -- Rapid Removal of Pb(II) from Acid Wastewater using Vanadium Titanium-bearing Magnetite Particles Coated by Humic Acidcoated by humic acid(VTM-HA) Magnetic Particles -- Study on the Technology of Synthesizing MgAl2O4 Spinel Refractory Material from Waste Chromium Slag of a Certain Chrome Plant in China -- Effect of Ferrosilicon on Reduction of Cr2O3 in Steelmaking Slags -- Bacterial Degradation of Free Cyanide in Alkaline Medium Using Bacillus Licheniformis Strain -- Determination of Limiting Current Density of a Solution with Copper, Zinc and EDTA from the Effluent of Brass Electrodeposition -- Effect of the PH on the Recovery of Al3+, Co2+, Cr3+, Cu2+, Fe3+, Mg2+, Mn2+, Ni2+ and Zn2+ by Purolite S950 -- Evaluation of the Occurrence of Fouling and Scaling on the Membrane HDX 200 for the Treatment of the Effluent of Brass Electrodeposition with EDTA as Complexing Agent -- High Temperature Crystallization Kinetics of MgSO4.H2O -- Preparation of Glass-ceramic from Titanium-bearing Blast Furnace Slag by "Petrurgic" Method -- Recovery of Copper from Nickel Laterite Leach Waste by Chemical Reduction Using Sodium Dithionite -- Recovery of Nickel and Cobalt from a Waste Zone of Nickel Laterite Ore Using a Mixture of Extractants in Solvent Extraction Technique -- White Ordinary Portland Cement Paste with Iron Oxide Powders Containing Arsenic Contents -- Part 3. Solar Cell Silicon -- Three-Dimensional Crystal-Plasticity based Model for Intrinsic Stresses in Multi-Junction Photovoltaic -- A Review of Solar Silicon Recycling -- Thermo-Calc of the Phase Diagram of the Fe-Si System -- Crystal Growth Mechanism of Si in Hypereutectic Al-Si Melt during the Electromagnetic Directional Solidification -- Thermo-Calc of the Phase Diagram of Calcium Silicon (Ca-Si) System -- Leaching of Indium from ITO Present in Amorphous Silicon Photovoltaic Modules -- Part 4. Materials for Energy Conversion and Storage -- Direct Performance Simulation Based on the Microstructure of SOFC Electrodes: A Phase Field Approach -- Effect of Sonication Power on Al2O3 Coated LiNi0.5Mn0.3Co0.2O2 Cathode Material for LIB -- Effect of Nano-graphite Dispersion on the Thermal Solar Selective Absorbance of Polymeric-based Coating Material -- Synthesis of MoAlB Particulates and Their Porous Derivatives by Selective Deintercalation of Al from MoAlB -- A New Economical Method for Fabricating High-purity Bi2O3 via Extraction-precipitation Stripping and Post Annealing -- Part 5. Stored Renewable Energy in Coal -- Aluminum-silicon Alloys Prepared from High-aluminum Fly Ash to Extract Magnesium from Serpentine -- Organic Agriculture Using Biomaterial Coal -- Extraction and Production of Rare Earth Elements from Coal Seam Bedrock and Caprock -- Extraction and Thermal Dissolution of Low-rank Coal by N-methyl-2-pyrrolidinone -- Enhancement of Coal Nanostructure and Investigation of its Novel Properties. Tipo de medio : Computadora Summary : This collection focuses on energy efficient technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery. The volume also covers various technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Papers addressing renewable energy resources for metals and materials production, waste heat recovery and other industrial energy efficient technologies, new concepts or devices for energy generation and conversion, energy efficiency improvement in process engineering, sustainability and life cycle assessment of energy systems, as well as the thermodynamics and modeling for sustainable metallurgical processes are included. This volume also includes topics on CO2 sequestration and reduction in greenhouse gas emissions from process engineering, sustainable technologies in extractive metallurgy, as well as the materials processing and manufacturing industries with reduced energy consumption and CO2 emission. Contributions from all areas of non-nuclear and non-traditional energy sources, such as solar, wind, and biomass are also included in this volume. Papers from the following symposia are presented in the book: Energy Technologies and CO2 Management Advanced Materials for Energy Conversion and Storage Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session Solar Cell Silicon Stored Renewable Energy in Coal. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Energy Technology 2019 : Carbon Dioxide Management and Other Technologies Tipo de documento: documento electrónico Autores: Wang, Tao, ; Chen, Xiaobo, ; Guillen, Donna Post, ; Zhang, Lei, ; Sun, Ziqi, ; Wang, Cong, ; Haque, Nawshad, ; Howarter, John A., ; Neelameggham, Neale R., ; Ikhmayies, Shadia, ; Smith, York R., ; Tafaghodi, L., ; Pandey, Amit, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2019 Número de páginas: XX, 308 p. 183 ilustraciones, 151 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-06209-5 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: Materiales Catálisis Fuerza y ​​energÃa Material Fuentes de energÃa renovable Materiales para EnergÃa y Catálisis Caracterización y Técnica AnalÃtica EnergÃa renovable Clasificación: 620.1 Resumen: Esta colección aborda la necesidad de tecnologÃas sostenibles con un consumo de energÃa y contaminantes reducidos y el desarrollo y aplicación de energÃas alternativas sostenibles para mantener un entorno y un suministro de energÃa ecológicos. Las contribuciones se centran en tecnologÃas energéticamente eficientes, incluidas tecnologÃas innovadoras de beneficio de minerales, tecnologÃas de fundición y reciclaje y recuperación de calor residual, asà como nuevas tecnologÃas energéticas emergentes. Los artÃculos también cubren varios aspectos tecnológicos de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. Los artÃculos de los siguientes simposios se presentan en el libro: TecnologÃas energéticas y gestión del dióxido de carbono. Materiales avanzados de silicio de células solares para la conversión y el almacenamiento de energÃa. Nota de contenido: Part 1. Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session -- Behavior of Co, Ni and Precious Metals in Copper Converting Process: Experimental Study -- Recycling of EAF Dust through Source Separation -- A Sustainable Methodology for Recycling Electric Arc Furnace Dust -- Thermal Separation and Leaching of Valuable Elements from Waste-derived Ashes -- Different Methods for the Characterization of Ash Compositions in Co-firing Boilers -- Utilization CFA-derived Tobermorite Fiber as Crystallization Revulsive in Autoclaved Concrete Block Production -- An Electrochemical Procedure for Copper Removal from Regenerated Pickling Solutions of Steel Plants -- Upgrading the Copper Value in a Waste Copper Smelter Dust Using the Falcon Concentrator -- Towards Commercialization of Indium Recovery from Waste Liquid Crystal Display Screens -- Engineering, Scientific, and Policy Inputs for Developing a Levelized Cost of Energy Storage Model -- Recovery of Gallium and Arsenic from Gallium Arsenide Semiconductor Scraps -- Rapid Removal of Pb(II) from Acid Wastewater using Vanadium Titanium-bearing Magnetite Particles Coated by Humic Acidcoated by humic acid(VTM-HA) Magnetic Particles -- Study on the Technology of Synthesizing MgAl2O4 Spinel Refractory Material from Waste Chromium Slag of a Certain Chrome Plant in China -- Effect of Ferrosilicon on Reduction of Cr2O3 in Steelmaking Slags -- Bacterial Degradation of Free Cyanide in Alkaline Medium Using Bacillus Licheniformis Strain -- Determination of Limiting Current Density of a Solution with Copper, Zinc and EDTA from the Effluent of Brass Electrodeposition -- Effect of the PH on the Recovery of Al3+, Co2+, Cr3+, Cu2+, Fe3+, Mg2+, Mn2+, Ni2+ and Zn2+ by Purolite S950 -- Evaluation of the Occurrence of Fouling and Scaling on the Membrane HDX 200 for the Treatment of the Effluent of Brass Electrodeposition with EDTA as Complexing Agent -- High Temperature Crystallization Kinetics of MgSO4.H2O -- Preparation of Glass-ceramic from Titanium-bearing Blast Furnace Slag by "Petrurgic" Method -- Recovery of Copper from Nickel Laterite Leach Waste by Chemical Reduction Using Sodium Dithionite -- Recovery of Nickel and Cobalt from a Waste Zone of Nickel Laterite Ore Using a Mixture of Extractants in Solvent Extraction Technique -- White Ordinary Portland Cement Paste with Iron Oxide Powders Containing Arsenic Contents -- Part 3. Solar Cell Silicon -- Three-Dimensional Crystal-Plasticity based Model for Intrinsic Stresses in Multi-Junction Photovoltaic -- A Review of Solar Silicon Recycling -- Thermo-Calc of the Phase Diagram of the Fe-Si System -- Crystal Growth Mechanism of Si in Hypereutectic Al-Si Melt during the Electromagnetic Directional Solidification -- Thermo-Calc of the Phase Diagram of Calcium Silicon (Ca-Si) System -- Leaching of Indium from ITO Present in Amorphous Silicon Photovoltaic Modules -- Part 4. Materials for Energy Conversion and Storage -- Direct Performance Simulation Based on the Microstructure of SOFC Electrodes: A Phase Field Approach -- Effect of Sonication Power on Al2O3 Coated LiNi0.5Mn0.3Co0.2O2 Cathode Material for LIB -- Effect of Nano-graphite Dispersion on the Thermal Solar Selective Absorbance of Polymeric-based Coating Material -- Synthesis of MoAlB Particulates and Their Porous Derivatives by Selective Deintercalation of Al from MoAlB -- A New Economical Method for Fabricating High-purity Bi2O3 via Extraction-precipitation Stripping and Post Annealing -- Part 5. Stored Renewable Energy in Coal -- Aluminum-silicon Alloys Prepared from High-aluminum Fly Ash to Extract Magnesium from Serpentine -- Organic Agriculture Using Biomaterial Coal -- Extraction and Production of Rare Earth Elements from Coal Seam Bedrock and Caprock -- Extraction and Thermal Dissolution of Low-rank Coal by N-methyl-2-pyrrolidinone -- Enhancement of Coal Nanostructure and Investigation of its Novel Properties. Tipo de medio : Computadora Summary : This collection addresses the need for sustainable technologies with reduced energy consumption and pollutants and the development and application of alternative sustainable energy to maintain a green environment and energy supply. Contributions focus on energy-efficient technologies including innovative ore beneficiation, smelting technologies, and recycling and waste heat recovery, as well as emerging novel energy technologies. Papers also cover various technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Papers from the following symposia are presented in the book: Energy Technologies and Carbon Dioxide Management Solar Cell Silicon Advanced Materials for Energy Conversion and Storage . Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Energy Technology 2019 : Carbon Dioxide Management and Other Technologies [documento electrónico] / Wang, Tao, ; Chen, Xiaobo, ; Guillen, Donna Post, ; Zhang, Lei, ; Sun, Ziqi, ; Wang, Cong, ; Haque, Nawshad, ; Howarter, John A., ; Neelameggham, Neale R., ; Ikhmayies, Shadia, ; Smith, York R., ; Tafaghodi, L., ; Pandey, Amit, . - 1 ed. . - [s.l.] : Springer, 2019 . - XX, 308 p. 183 ilustraciones, 151 ilustraciones en color.
ISBN : 978-3-030-06209-5
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: Materiales Catálisis Fuerza y ​​energÃa Material Fuentes de energÃa renovable Materiales para EnergÃa y Catálisis Caracterización y Técnica AnalÃtica EnergÃa renovable Clasificación: 620.1 Resumen: Esta colección aborda la necesidad de tecnologÃas sostenibles con un consumo de energÃa y contaminantes reducidos y el desarrollo y aplicación de energÃas alternativas sostenibles para mantener un entorno y un suministro de energÃa ecológicos. Las contribuciones se centran en tecnologÃas energéticamente eficientes, incluidas tecnologÃas innovadoras de beneficio de minerales, tecnologÃas de fundición y reciclaje y recuperación de calor residual, asà como nuevas tecnologÃas energéticas emergentes. Los artÃculos también cubren varios aspectos tecnológicos de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. Los artÃculos de los siguientes simposios se presentan en el libro: TecnologÃas energéticas y gestión del dióxido de carbono. Materiales avanzados de silicio de células solares para la conversión y el almacenamiento de energÃa. Nota de contenido: Part 1. Energy Technologies and CO2 Management Symposium -- Gas Hydrate-based CO2 Separation Process: Quantitative Assessment of the Effectiveness of Various Chemical Additives Involved in the Process -- Tar Removal from Hot Coke Oven Gas for H2 Amplification with In Situ CO2 Capture -- An Evaluation Method for Material and Energy Conversion Effect with Steel Manufacturing Process Data -- Preparation and Characterization of Activated Carbon from Waste Ion-exchange Resin for CO2 Adsorption -- Evaluation of Variation in the Life Cycle Based Environmental Impacts for Copper Concentrate Production -- Direct Reduction of Copper Slag Composite Pellets within Lignite Using Biomass as Binder -- Thermodynamic Analysis of Incineration Treatment of Waste Disposable Syringes in an EAF Steel-making Process -- The Reduction Kinetic of the Combined Cu-based Oxygen Carrier Used for Chemical Looping Gasification Technology -- Synergistic Effect Between Fat Coal and Poplar During Co-pyrolysis with Thermal Behavior and ATR-FTIR Analysis -- Flow Characteristic of Two-phase Bubble Reactor for Slag Waste Heat Recovery -- Improving Energy Efficiency in Direct Method for Continuous Casting of Lead Sheets -- Research on High Efficiency Energy Conversion Technology for Modern Hot Blast Stove -- An Exergy Study of Cowper Stove Operations with an Iron Blast Furnace -- Waste Heat Recovery from Aluminum Production -- Leaching and Carbonation of Electric Arc Furnace(EAF) Slag under a Microwave Field for Mineral Carbonation -- A Novel Preparation of Bi2O3 and Their Potent Photocatalytic Activity under Visible-light Irradiation -- Energy Conservation in Sintering Ignition Process Based on Comprehensive Ignition Intensity -- Part 2. Deriving Value from Challenging Waste Streams: Recycling and Sustainability Joint Session -- Behavior of Co, Ni and Precious Metals in Copper Converting Process: Experimental Study -- Recycling of EAF Dust through Source Separation -- A Sustainable Methodology for Recycling Electric Arc Furnace Dust -- Thermal Separation and Leaching of Valuable Elements from Waste-derived Ashes -- Different Methods for the Characterization of Ash Compositions in Co-firing Boilers -- Utilization CFA-derived Tobermorite Fiber as Crystallization Revulsive in Autoclaved Concrete Block Production -- An Electrochemical Procedure for Copper Removal from Regenerated Pickling Solutions of Steel Plants -- Upgrading the Copper Value in a Waste Copper Smelter Dust Using the Falcon Concentrator -- Towards Commercialization of Indium Recovery from Waste Liquid Crystal Display Screens -- Engineering, Scientific, and Policy Inputs for Developing a Levelized Cost of Energy Storage Model -- Recovery of Gallium and Arsenic from Gallium Arsenide Semiconductor Scraps -- Rapid Removal of Pb(II) from Acid Wastewater using Vanadium Titanium-bearing Magnetite Particles Coated by Humic Acidcoated by humic acid(VTM-HA) Magnetic Particles -- Study on the Technology of Synthesizing MgAl2O4 Spinel Refractory Material from Waste Chromium Slag of a Certain Chrome Plant in China -- Effect of Ferrosilicon on Reduction of Cr2O3 in Steelmaking Slags -- Bacterial Degradation of Free Cyanide in Alkaline Medium Using Bacillus Licheniformis Strain -- Determination of Limiting Current Density of a Solution with Copper, Zinc and EDTA from the Effluent of Brass Electrodeposition -- Effect of the PH on the Recovery of Al3+, Co2+, Cr3+, Cu2+, Fe3+, Mg2+, Mn2+, Ni2+ and Zn2+ by Purolite S950 -- Evaluation of the Occurrence of Fouling and Scaling on the Membrane HDX 200 for the Treatment of the Effluent of Brass Electrodeposition with EDTA as Complexing Agent -- High Temperature Crystallization Kinetics of MgSO4.H2O -- Preparation of Glass-ceramic from Titanium-bearing Blast Furnace Slag by "Petrurgic" Method -- Recovery of Copper from Nickel Laterite Leach Waste by Chemical Reduction Using Sodium Dithionite -- Recovery of Nickel and Cobalt from a Waste Zone of Nickel Laterite Ore Using a Mixture of Extractants in Solvent Extraction Technique -- White Ordinary Portland Cement Paste with Iron Oxide Powders Containing Arsenic Contents -- Part 3. Solar Cell Silicon -- Three-Dimensional Crystal-Plasticity based Model for Intrinsic Stresses in Multi-Junction Photovoltaic -- A Review of Solar Silicon Recycling -- Thermo-Calc of the Phase Diagram of the Fe-Si System -- Crystal Growth Mechanism of Si in Hypereutectic Al-Si Melt during the Electromagnetic Directional Solidification -- Thermo-Calc of the Phase Diagram of Calcium Silicon (Ca-Si) System -- Leaching of Indium from ITO Present in Amorphous Silicon Photovoltaic Modules -- Part 4. Materials for Energy Conversion and Storage -- Direct Performance Simulation Based on the Microstructure of SOFC Electrodes: A Phase Field Approach -- Effect of Sonication Power on Al2O3 Coated LiNi0.5Mn0.3Co0.2O2 Cathode Material for LIB -- Effect of Nano-graphite Dispersion on the Thermal Solar Selective Absorbance of Polymeric-based Coating Material -- Synthesis of MoAlB Particulates and Their Porous Derivatives by Selective Deintercalation of Al from MoAlB -- A New Economical Method for Fabricating High-purity Bi2O3 via Extraction-precipitation Stripping and Post Annealing -- Part 5. Stored Renewable Energy in Coal -- Aluminum-silicon Alloys Prepared from High-aluminum Fly Ash to Extract Magnesium from Serpentine -- Organic Agriculture Using Biomaterial Coal -- Extraction and Production of Rare Earth Elements from Coal Seam Bedrock and Caprock -- Extraction and Thermal Dissolution of Low-rank Coal by N-methyl-2-pyrrolidinone -- Enhancement of Coal Nanostructure and Investigation of its Novel Properties. Tipo de medio : Computadora Summary : This collection addresses the need for sustainable technologies with reduced energy consumption and pollutants and the development and application of alternative sustainable energy to maintain a green environment and energy supply. Contributions focus on energy-efficient technologies including innovative ore beneficiation, smelting technologies, and recycling and waste heat recovery, as well as emerging novel energy technologies. Papers also cover various technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Papers from the following symposia are presented in the book: Energy Technologies and Carbon Dioxide Management Solar Cell Silicon Advanced Materials for Energy Conversion and Storage . Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Energy Technology 2021 : Carbon Dioxide Management and Other Technologies Tipo de documento: documento electrónico Autores: Baba, Alafara Abdullahi, ; Zhang, Lei, ; Guillen, Donna P., ; Neelameggham, Neale R., ; Peng, Hong, ; Zhong, Yulin, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2021 Número de páginas: XIII, 165 p. 101 ilustraciones, 76 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-65257-9 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: Materiales Catálisis Fuerza y ​​energÃa Fuentes de energÃa renovable Cogeneración de energÃa eléctrica y calor. Combustibles fósiles EnergÃa solar El poder del agua Materiales para EnergÃa y Catálisis EnergÃa renovable Combustible fósil EnergÃa Solar Térmica EnergÃa hidro Clasificación: 620.1 Resumen: La energÃa limpia y sostenible es de suma importancia para las actividades industriales, el desarrollo económico, el medio ambiente y el bienestar de los civiles. Como tal, la investigación sobre generación, almacenamiento y aplicación de energÃa limpia es una preocupación central tanto para el mundo académico como para la industria. Esta colección aborda las necesidades apremiantes de tecnologÃas sostenibles con menor consumo de energÃa y contaminación ambiental y el desarrollo y aplicación de energÃas alternativas sostenibles para mantener un entorno verde y un suministro de energÃa eficiente y duradero. Los contribuyentes representan tanto a la industria como al mundo académico y se centran en tecnologÃas energéticas nuevas y eficientes, incluido el beneficio innovador de minerales, tecnologÃas de fundición y reciclaje y recuperación de calor residual, asà como soluciones energéticas novedosas emergentes. El volumen también cubre una amplia gama de aspectos tecnológicos nuevos y maduros de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. Tipo de medio : Computadora Summary : Clean and sustainable energy is of paramount importance for industrial activities, economic development, environment, and welfare of civilians. As such, research on generation, storage, and application of clean energy is a central concern of both academia and industry. This collection addresses the pressing needs for sustainable technologies with reduced energy consumption and environmental pollutions and the development and application of alternative sustainable energy to maintain a green environment and efficient and long-lasting energy supply. Contributors represent both industry and academia and focus on new and efficient energy technologies including innovative ore beneficiation, smelting technologies, and recycling and waste heat recovery, as well as emerging novel energy solutions. The volume also covers a broad range of mature and new technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Energy Technology 2021 : Carbon Dioxide Management and Other Technologies [documento electrónico] / Baba, Alafara Abdullahi, ; Zhang, Lei, ; Guillen, Donna P., ; Neelameggham, Neale R., ; Peng, Hong, ; Zhong, Yulin, . - 1 ed. . - [s.l.] : Springer, 2021 . - XIII, 165 p. 101 ilustraciones, 76 ilustraciones en color.
ISBN : 978-3-030-65257-9
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: Materiales Catálisis Fuerza y ​​energÃa Fuentes de energÃa renovable Cogeneración de energÃa eléctrica y calor. Combustibles fósiles EnergÃa solar El poder del agua Materiales para EnergÃa y Catálisis EnergÃa renovable Combustible fósil EnergÃa Solar Térmica EnergÃa hidro Clasificación: 620.1 Resumen: La energÃa limpia y sostenible es de suma importancia para las actividades industriales, el desarrollo económico, el medio ambiente y el bienestar de los civiles. Como tal, la investigación sobre generación, almacenamiento y aplicación de energÃa limpia es una preocupación central tanto para el mundo académico como para la industria. Esta colección aborda las necesidades apremiantes de tecnologÃas sostenibles con menor consumo de energÃa y contaminación ambiental y el desarrollo y aplicación de energÃas alternativas sostenibles para mantener un entorno verde y un suministro de energÃa eficiente y duradero. Los contribuyentes representan tanto a la industria como al mundo académico y se centran en tecnologÃas energéticas nuevas y eficientes, incluido el beneficio innovador de minerales, tecnologÃas de fundición y reciclaje y recuperación de calor residual, asà como soluciones energéticas novedosas emergentes. El volumen también cubre una amplia gama de aspectos tecnológicos nuevos y maduros de los ecosistemas energéticos sostenibles, procesos que mejoran la eficiencia energética, reducen las emisiones térmicas y reducen el dióxido de carbono y otras emisiones de efecto invernadero. Tipo de medio : Computadora Summary : Clean and sustainable energy is of paramount importance for industrial activities, economic development, environment, and welfare of civilians. As such, research on generation, storage, and application of clean energy is a central concern of both academia and industry. This collection addresses the pressing needs for sustainable technologies with reduced energy consumption and environmental pollutions and the development and application of alternative sustainable energy to maintain a green environment and efficient and long-lasting energy supply. Contributors represent both industry and academia and focus on new and efficient energy technologies including innovative ore beneficiation, smelting technologies, and recycling and waste heat recovery, as well as emerging novel energy solutions. The volume also covers a broad range of mature and new technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Magnesium Technology 2017 Tipo de documento: documento electrónico Autores: Solanki, Kiran N., ; Orlov, Dmytro, ; Singh, Alok, ; Neelameggham, Neale R., Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2017 Número de páginas: XXII, 689 p. 551 ilustraciones ISBN/ISSN/DL: 978-3-319-52392-7 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: Rieles Material Materiales Metales y aleaciones Caracterización y Técnica AnalÃtica IngenierÃa de Materiales Clasificación: 620.16 Resumen: El Simposio de TecnologÃa del Magnesio, evento en el que se basa esta colección, es una de las reuniones anuales de especialistas en magnesio más grandes del mundo. Los papeles representan todos los aspectos del campo, desde la producción primaria hasta las aplicaciones y el reciclaje. Además, los artÃculos exploran todo, desde los resultados de la investigación básica hasta la industrialización. Magnesium Technology 2017 cubre un amplio espectro de temas actuales, incluidas las aleaciones y sus propiedades; productos fundidos y procesamiento; productos elaborados y procesamiento; conformado, unión y mecanizado; corrosión y acabado superficial; ecologÃa; y aplicaciones estructurales. Además, se cubren aplicaciones nuevas y emergentes. Nota de contenido: Part 1: Magnesium Technology 2017: Keynote Session I -- Multi-scale Investigation on Yield "Symmetry" and Reduced Strength Differential in an Mg-Y Alloy -- Targeting High Impact R&D for Automotive Magnesium Alloys -- Magnesium Development as a Lightweight Material – In Competition with Other Structural Materials -- The Continued Quest for Low-Temperature Formability in Mg Alloys: Historical Developments and Future Opportunities -- Part 2: Magnesium Technology 2017: Alloy Development -- Using the Crystal Plasticity Approach to Parse the Effects of Alloying and Aging on the Mechanical Behavior of Wrought Mg Alloys -- Development of high-strength high-speed-extrudable Mg-Al-Ca-Mn alloy -- Development of ultra-high strength and ductile Mg-Gd-Y-Zn-Zr alloys by extrusion with forced-air cooling -- Effect of Extrusion Ratio on Microstructure and Resulting Mechanical Properties of Mg Alloys with LPSO Phase -- Mechanically Alloyed Magnesium Based Nanostructured Alloy Powders for Stent Applications -- Combined Effects of Grain Size Refinement and Dynamic Precipitation on Mechanical Properties of a New Magnesium -- Alloy -- Machinability Investigation in Micro-milling of Mg based MMCs with Nano-sized Particles -- Part 3: Magnesium Technology 2017: Solidification and Processing I -- Microsegregation in High Pressure Die Cast Mg Alloys -- Numerical simulations of TRC equipped with a core -- Growth of Al8Mn5 intermetallic in AZ91 -- Influence of CaO grain refiner addition on the microstructure and mechanical properties of as-cast Mg alloys -- Grain refinement of Mg and its alloy by inoculation of in-situ MgO particles -- Numerical study of magnesium production by Pidgeon process and pre-prepared pellets silicothermic process: comparison of heat transfer -- On the age hardening response of aluminum containing magnesium sheets with zinc or manganese (AZ- and AM series alloys) -- Performance evaluation of high-pressure die-cast magnesium alloys -- Simulation Study on Direct Desulfurization ofMolten Iron by Magnesium Vapor -- Part 4: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue I -- Twinning super dislocations to help understand strength -- Basal Dislocation Transmutation through {1012} Twin Boundaries -- Ductility Enhancement in Mg alloys by Anisotropy Engineering -- Modeling the effect of alloying elements in magnesium on deformation twin characteristics -- Simulating Discrete Twin Evolution in Magnesium using a Novel Crystal Plasticity Finite Element Model -- The effect of {10-12} twin boundary on the evolution of defect substructure -- Part 5: Magnesium Technology 2017: Solidification and Processing II -- Processing of Mg-sheet via Twin Roll Casting -- Effects of Mn and Zn Solutes on Grain Refinement of Commercial Pure Magnesium -- Experimental investigation of continuous magnesium production by carbothermal reduction -- Precipitation behavior of Mg-Al-Sn-Zn(-Na) alloys -- Study on the Direct Oxidation Thermal Decomposition of MagnesiumChloride byproduct in the Sponge Titanium -- Thermal decomposition kinetics of pre-prepared pellets for the novel silicothermic process -- Thermal Stability of Cryomilled Mg Alloy Powder -- Thermomechanical Processing of Thixomolded Alloys -- Part 6: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue II -- Dynamic behavior of an AZ31 alloy under varying strain rates and stress triaxialities -- Enhancing the tensile response of magnesium through simultaneous addition of aluminium and alumina nanoparticulates -- Effect of solutes additions on the microstructure and mechanical properties of cast Mg-Al based alloys -- Enhanced mechanical properties of extruded Mg-9mass%Al-1mass%Zn-2mass%Ca alloy -- Influence of strain path change on the microstructure and mechanical properties of duplex Mg-Li alloy -- Mechanical Properties and Deformation Mechanism of Mg-Y Alloy with Various Grain Sizes -- Microstructure and Mechanical Properties of High Pressure Die Cast Mg-Al-Sn-Si Alloys -- Microstructure and mechanical properties of an extruded Mg-1.58Zn-0.52Gd alloy -- Modelling Magnesium Alloys for Improved Isotropic and Symmetric Yield Behaviour -- Part 7: Magnesium Technology 2017: Solidification and Processing III and Magnesium-Rare Earth Alloys I -- Scaled-Up Fabrication of Thin-Walled ZK60 Tubing using Shear Assisted Processing and Extrusion (ShAPE) -- Biocompatible Magnesium Alloy ZNdK100 – Adaptation of Extrusion Parameters to Tailor the Mechanical Properties to Different Implant Applications -- Characterization of Semi-closed Die-Forged ZK60 Mg Alloy Extrusion -- Optimization of Nitrogen bubbling conditions for extruded Mg alloy with balanced mechanical properties -- Effects of Gadolinium and Neodymium Addition on Young's Modulus of Magnesium-based Binary Alloys -- Aging behavior of Mg alloys containing Nd and Y -- Variation of Rare Earth Elements in the Magnesium Alloy ME21 for the Sheet Production -- Phase stability and formation in Mg–Gd–Zn alloys – key data for ICME of Mg alloys -- Part 8: Magnesium Technology 2017: Corrosion -- An Electrochemical Investigation of Mg-Ni Hydrogen Storage Alloys by Mechanical Alloying -- Corrosion and creep resistance of thixomolded® magnesium alloys -- Corrosion Properties of Mg-6Al-0.3Mn-aSn-bZn Alloys -- Corrosion of magnesium-aluminum (Mg-Al) alloys – An interplay between Al content and CO2 -- Excimer Laser Processing of Al containing Mg Alloys for Improved Corrosion Resistance -- Effect of Al and Sn on discharge behavior of Mg alloy as anode for Mg-Air battery -- Utilization of a Partially Non-aqueous Electrolyte for the Spatial Mapping of Mg Corrosion using a model Mg-Al Electrode -- Voltammetric Studies of Extruded Pure Magnesium in Different Electrolytes and Its Corrosion Morphology -- Part 9: Magnesium Technology 2017: Magnesium-Rare Earth Alloys II -- Microstructure and mechanical properties of Mg-Zn-Gd alloys after rolling or extrusion processes -- A comparative study on the microstructure, mechanicalproperties, and hot deformation of magnesium alloys containing zinc, calcium and yttrium -- Addition of Holmium & Erbium and Hot-rolling effects on the Microstructure and Mechanical Properties of Mg-Li based Alloys -- Bonding environments in a creep–resistant Mg-RE-Zn alloy -- Microstructural and Numerical Investigation on the Shear Response of a Rare-Earth Magnesium Alloy Sheet -- Solute effect on strength and formability of Mg: A first-principle study -- Understanding on the role of rare earth elements in activation of slip in magnesium: An atomistic approach -- Stabilisation of disordered BCC phases in magnesium-rare earth alloys -- The Effects of Ca Addition on Microstructures and Mechanical Properties of Gravity Cast Mg-Zn-Y Alloy -- Part 10: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue III -- Microstructure and Texture Evolution during Hot Deformation of Cast-Homogenized ZK60 Magnesium Alloy -- Development of Texture during Tensile Test at Room Temperature -- Effect of Ca on the microstructure, texture and mechanical properties in Mg-Zn-Mn based alloy -- Evaluation of in vitro fatigue properties of biodegradable Mg-0.3at.%Ca alloy -- Mechanical properties and fatigue strength of extruded cobalt-containing magnetic magnesium alloys -- Neutron diffraction and acoustic emission measurement during loading and unloading of magnesium aluminium binary alloys -- Texture weakening and grain refinement by high speed rolling and annealing of an AZ31 magnesium alloy -- The Relative Contributions of Deformation Modes to AZ31 Rolling Textures in Different Temperature Regimes -- Effects of Texture and Triaxiality on the Plasticity of Magnesium Alloys -- Part 11: Magnesium Technology 2017: Poster Session -- Microstructures and Tensile Properties of As-cast Magnesium AM60-Based Composite Containing Alumina Fibres and Nano Particles -- Part 12: In-situ Methods for Unraveling Structure-Property Relationships in Light Metals: Imaging and Acoustic Emission -- Overview of In-Situ X-ray Studies of Light Alloy Solidification in Microgravity -- Morphological transition of a-Mg dendrites during near-isothermal solidification of a Mg-Nd-Gd-Zn-Zr casting alloy -- Real-time observation of AZ91 solidification by synchrotron radiography -- 3D microstructural evolution on solidifying Mg-5Nd-5Zn alloy observed via in situ synchrotron tomography --
Acoustic emission s
tudy of deformation behavior of wrought Mg alloys -- Effect of Thermo-mechanical Treatment of Extruded Z1 Mg Alloy on Resulting Mechanical Properties -- In-situ investigation of deformation mechanisms in Mg-Zn-Y magnesium alloy with LPSO phase by diffraction methods and acoustic emission -- Part 13: In-situ Methods for Unraveling Structure-Property Relationships in Light Metals: Diffraction and Other Novel Methods -- Structural evolution of metals at high temperature: Complementary investigations with neutron and synchrotron quantum beams -- Advanced Aluminum Alloys Development and In-Situ Fitness-for-Service Testing in Automotive Lightweighting -- In-situ X-ray Synchrotron Profile Analysis during High Pressure Torsion of Ti -- The Effect of Grain Refinement on Hot Tearing in AZ91D Magnesium Alloys -- Formability of Magnesium Alloy AZ31B from Room Temperature to 125C under Biaxial Tension -- In-situ real-time monitoring of aging processes in an aluminum alloy by high-precision dilatometry -- Effect of the Zn content on the compression behaviour of Mg5Nd(Zn): an in situ synchrotron radiation diffraction study.Tipo de medio : Computadora Summary : The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2017 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Magnesium Technology 2017 [documento electrónico] / Solanki, Kiran N., ; Orlov, Dmytro, ; Singh, Alok, ; Neelameggham, Neale R., . - 1 ed. . - [s.l.] : Springer, 2017 . - XXII, 689 p. 551 ilustraciones.
ISBN : 978-3-319-52392-7
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: Rieles Material Materiales Metales y aleaciones Caracterización y Técnica AnalÃtica IngenierÃa de Materiales Clasificación: 620.16 Resumen: El Simposio de TecnologÃa del Magnesio, evento en el que se basa esta colección, es una de las reuniones anuales de especialistas en magnesio más grandes del mundo. Los papeles representan todos los aspectos del campo, desde la producción primaria hasta las aplicaciones y el reciclaje. Además, los artÃculos exploran todo, desde los resultados de la investigación básica hasta la industrialización. Magnesium Technology 2017 cubre un amplio espectro de temas actuales, incluidas las aleaciones y sus propiedades; productos fundidos y procesamiento; productos elaborados y procesamiento; conformado, unión y mecanizado; corrosión y acabado superficial; ecologÃa; y aplicaciones estructurales. Además, se cubren aplicaciones nuevas y emergentes. Nota de contenido: Part 1: Magnesium Technology 2017: Keynote Session I -- Multi-scale Investigation on Yield "Symmetry" and Reduced Strength Differential in an Mg-Y Alloy -- Targeting High Impact R&D for Automotive Magnesium Alloys -- Magnesium Development as a Lightweight Material – In Competition with Other Structural Materials -- The Continued Quest for Low-Temperature Formability in Mg Alloys: Historical Developments and Future Opportunities -- Part 2: Magnesium Technology 2017: Alloy Development -- Using the Crystal Plasticity Approach to Parse the Effects of Alloying and Aging on the Mechanical Behavior of Wrought Mg Alloys -- Development of high-strength high-speed-extrudable Mg-Al-Ca-Mn alloy -- Development of ultra-high strength and ductile Mg-Gd-Y-Zn-Zr alloys by extrusion with forced-air cooling -- Effect of Extrusion Ratio on Microstructure and Resulting Mechanical Properties of Mg Alloys with LPSO Phase -- Mechanically Alloyed Magnesium Based Nanostructured Alloy Powders for Stent Applications -- Combined Effects of Grain Size Refinement and Dynamic Precipitation on Mechanical Properties of a New Magnesium -- Alloy -- Machinability Investigation in Micro-milling of Mg based MMCs with Nano-sized Particles -- Part 3: Magnesium Technology 2017: Solidification and Processing I -- Microsegregation in High Pressure Die Cast Mg Alloys -- Numerical simulations of TRC equipped with a core -- Growth of Al8Mn5 intermetallic in AZ91 -- Influence of CaO grain refiner addition on the microstructure and mechanical properties of as-cast Mg alloys -- Grain refinement of Mg and its alloy by inoculation of in-situ MgO particles -- Numerical study of magnesium production by Pidgeon process and pre-prepared pellets silicothermic process: comparison of heat transfer -- On the age hardening response of aluminum containing magnesium sheets with zinc or manganese (AZ- and AM series alloys) -- Performance evaluation of high-pressure die-cast magnesium alloys -- Simulation Study on Direct Desulfurization ofMolten Iron by Magnesium Vapor -- Part 4: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue I -- Twinning super dislocations to help understand strength -- Basal Dislocation Transmutation through {1012} Twin Boundaries -- Ductility Enhancement in Mg alloys by Anisotropy Engineering -- Modeling the effect of alloying elements in magnesium on deformation twin characteristics -- Simulating Discrete Twin Evolution in Magnesium using a Novel Crystal Plasticity Finite Element Model -- The effect of {10-12} twin boundary on the evolution of defect substructure -- Part 5: Magnesium Technology 2017: Solidification and Processing II -- Processing of Mg-sheet via Twin Roll Casting -- Effects of Mn and Zn Solutes on Grain Refinement of Commercial Pure Magnesium -- Experimental investigation of continuous magnesium production by carbothermal reduction -- Precipitation behavior of Mg-Al-Sn-Zn(-Na) alloys -- Study on the Direct Oxidation Thermal Decomposition of MagnesiumChloride byproduct in the Sponge Titanium -- Thermal decomposition kinetics of pre-prepared pellets for the novel silicothermic process -- Thermal Stability of Cryomilled Mg Alloy Powder -- Thermomechanical Processing of Thixomolded Alloys -- Part 6: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue II -- Dynamic behavior of an AZ31 alloy under varying strain rates and stress triaxialities -- Enhancing the tensile response of magnesium through simultaneous addition of aluminium and alumina nanoparticulates -- Effect of solutes additions on the microstructure and mechanical properties of cast Mg-Al based alloys -- Enhanced mechanical properties of extruded Mg-9mass%Al-1mass%Zn-2mass%Ca alloy -- Influence of strain path change on the microstructure and mechanical properties of duplex Mg-Li alloy -- Mechanical Properties and Deformation Mechanism of Mg-Y Alloy with Various Grain Sizes -- Microstructure and Mechanical Properties of High Pressure Die Cast Mg-Al-Sn-Si Alloys -- Microstructure and mechanical properties of an extruded Mg-1.58Zn-0.52Gd alloy -- Modelling Magnesium Alloys for Improved Isotropic and Symmetric Yield Behaviour -- Part 7: Magnesium Technology 2017: Solidification and Processing III and Magnesium-Rare Earth Alloys I -- Scaled-Up Fabrication of Thin-Walled ZK60 Tubing using Shear Assisted Processing and Extrusion (ShAPE) -- Biocompatible Magnesium Alloy ZNdK100 – Adaptation of Extrusion Parameters to Tailor the Mechanical Properties to Different Implant Applications -- Characterization of Semi-closed Die-Forged ZK60 Mg Alloy Extrusion -- Optimization of Nitrogen bubbling conditions for extruded Mg alloy with balanced mechanical properties -- Effects of Gadolinium and Neodymium Addition on Young's Modulus of Magnesium-based Binary Alloys -- Aging behavior of Mg alloys containing Nd and Y -- Variation of Rare Earth Elements in the Magnesium Alloy ME21 for the Sheet Production -- Phase stability and formation in Mg–Gd–Zn alloys – key data for ICME of Mg alloys -- Part 8: Magnesium Technology 2017: Corrosion -- An Electrochemical Investigation of Mg-Ni Hydrogen Storage Alloys by Mechanical Alloying -- Corrosion and creep resistance of thixomolded® magnesium alloys -- Corrosion Properties of Mg-6Al-0.3Mn-aSn-bZn Alloys -- Corrosion of magnesium-aluminum (Mg-Al) alloys – An interplay between Al content and CO2 -- Excimer Laser Processing of Al containing Mg Alloys for Improved Corrosion Resistance -- Effect of Al and Sn on discharge behavior of Mg alloy as anode for Mg-Air battery -- Utilization of a Partially Non-aqueous Electrolyte for the Spatial Mapping of Mg Corrosion using a model Mg-Al Electrode -- Voltammetric Studies of Extruded Pure Magnesium in Different Electrolytes and Its Corrosion Morphology -- Part 9: Magnesium Technology 2017: Magnesium-Rare Earth Alloys II -- Microstructure and mechanical properties of Mg-Zn-Gd alloys after rolling or extrusion processes -- A comparative study on the microstructure, mechanicalproperties, and hot deformation of magnesium alloys containing zinc, calcium and yttrium -- Addition of Holmium & Erbium and Hot-rolling effects on the Microstructure and Mechanical Properties of Mg-Li based Alloys -- Bonding environments in a creep–resistant Mg-RE-Zn alloy -- Microstructural and Numerical Investigation on the Shear Response of a Rare-Earth Magnesium Alloy Sheet -- Solute effect on strength and formability of Mg: A first-principle study -- Understanding on the role of rare earth elements in activation of slip in magnesium: An atomistic approach -- Stabilisation of disordered BCC phases in magnesium-rare earth alloys -- The Effects of Ca Addition on Microstructures and Mechanical Properties of Gravity Cast Mg-Zn-Y Alloy -- Part 10: Magnesium Technology 2017: Mechanical Behavior: Twinning, Plasticity, Texture, and Fatigue III -- Microstructure and Texture Evolution during Hot Deformation of Cast-Homogenized ZK60 Magnesium Alloy -- Development of Texture during Tensile Test at Room Temperature -- Effect of Ca on the microstructure, texture and mechanical properties in Mg-Zn-Mn based alloy -- Evaluation of in vitro fatigue properties of biodegradable Mg-0.3at.%Ca alloy -- Mechanical properties and fatigue strength of extruded cobalt-containing magnetic magnesium alloys -- Neutron diffraction and acoustic emission measurement during loading and unloading of magnesium aluminium binary alloys -- Texture weakening and grain refinement by high speed rolling and annealing of an AZ31 magnesium alloy -- The Relative Contributions of Deformation Modes to AZ31 Rolling Textures in Different Temperature Regimes -- Effects of Texture and Triaxiality on the Plasticity of Magnesium Alloys -- Part 11: Magnesium Technology 2017: Poster Session -- Microstructures and Tensile Properties of As-cast Magnesium AM60-Based Composite Containing Alumina Fibres and Nano Particles -- Part 12: In-situ Methods for Unraveling Structure-Property Relationships in Light Metals: Imaging and Acoustic Emission -- Overview of In-Situ X-ray Studies of Light Alloy Solidification in Microgravity -- Morphological transition of a-Mg dendrites during near-isothermal solidification of a Mg-Nd-Gd-Zn-Zr casting alloy -- Real-time observation of AZ91 solidification by synchrotron radiography -- 3D microstructural evolution on solidifying Mg-5Nd-5Zn alloy observed via in situ synchrotron tomography --
Acoustic emission s
tudy of deformation behavior of wrought Mg alloys -- Effect of Thermo-mechanical Treatment of Extruded Z1 Mg Alloy on Resulting Mechanical Properties -- In-situ investigation of deformation mechanisms in Mg-Zn-Y magnesium alloy with LPSO phase by diffraction methods and acoustic emission -- Part 13: In-situ Methods for Unraveling Structure-Property Relationships in Light Metals: Diffraction and Other Novel Methods -- Structural evolution of metals at high temperature: Complementary investigations with neutron and synchrotron quantum beams -- Advanced Aluminum Alloys Development and In-Situ Fitness-for-Service Testing in Automotive Lightweighting -- In-situ X-ray Synchrotron Profile Analysis during High Pressure Torsion of Ti -- The Effect of Grain Refinement on Hot Tearing in AZ91D Magnesium Alloys -- Formability of Magnesium Alloy AZ31B from Room Temperature to 125C under Biaxial Tension -- In-situ real-time monitoring of aging processes in an aluminum alloy by high-precision dilatometry -- Effect of the Zn content on the compression behaviour of Mg5Nd(Zn): an in situ synchrotron radiation diffraction study.Tipo de medio : Computadora Summary : The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2017 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, there is coverage of new and emerging applications. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
Permalink
Permalink
Permalink
Permalink
Permalink
Permalink
Permalink
Permalink
Permalink
