Información del autor
Autor Ricci, Laura |
Documentos disponibles escritos por este autor (6)
Crear una solicitud de compra Refinar búsqueda
TÃtulo : Distributed Applications and Interoperable Systems : 19th IFIP WG 6.1 International Conference, DAIS 2019, Held as Part of the 14th International Federated Conference on Distributed Computing Techniques, DisCoTec 2019, Kongens Lyngby, Denmark, June 17–21, 2019, Proceedings / Tipo de documento: documento electrónico Autores: Pereira, José, ; Ricci, Laura, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2019 Número de páginas: XVII, 179 p. 101 ilustraciones, 54 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-22496-7 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: Red de computadoras Computadoras Propósitos especiales CriptografÃa Cifrado de datos (Informática) Protección de datos Ordenadores Redes de comunicación informática Sistemas de propósito especial y basados ​​en aplicaciones CriptologÃa Seguridad de datos e información Entornos informáticos Clasificación: 004.6 Ciencia de los computadores (Interfaces y comunicaciones) Resumen: Este libro constituye las actas de la 19.ª Conferencia Internacional IFIP sobre Aplicaciones Distribuidas y Sistemas Interoperables, DAIS 2019, celebrada en Kongens Lyngby, Dinamarca, en junio de 2019, como parte de la 14.ª Conferencia Federada Internacional sobre Técnicas de Computación Distribuida, DisCoTec 2019. Los artÃculos completos presentados junto con 2 artÃculos breves fueron cuidadosamente revisados ​​y seleccionados entre 28 presentaciones. Los documentos abordaron desafÃos en múltiples áreas de aplicaciones, como Internet de las cosas, computación en la nube y en el borde, y sistemas móviles. Algunos artÃculos se centraron en el middleware para gestionar la concurrencia y la coherencia en sistemas distribuidos, incluida la replicación de datos y las transacciones. Nota de contenido: Syncpal: A Simple and Iterative Reconciliation Algorithm for File Synchronizers -- Check-Wait-Pounce: Increasing Transactional Data Structure Throughput by Delaying Transactions -- Putting Order in Strong Eventual Consistency -- Composable Actor Behaviour -- Gossip Learning as a Decentralized Alternative to Federated Learning -- Using Trusted Execution Environments for Secure Stream Processing of Medical Data -- Stunner: A Smart Phone Trace for Developing Decentralized Edge Systems -- FOUGERE: User-Centric Location Privacy in Mobile Crowdsourcing Apps -- On The Performance of ARM TrustZone -- CapBAC in Hyperledger Sawtooth -- Developing Secure Services for IoT with OP-TEE: A First Look at Performance and Usability. . Tipo de medio : Computadora Summary : This book constitutes the proceedings of the 19th IFIP International Conference on Distributed Applications and Interoperable Systems, DAIS 2019, held in Kongens Lyngby, Denmark, in June 2019, as part of the 14th International Federated Conference on Distributed Computing Techniques, DisCoTec 2019. The 9 full papers presented together with 2 short papers were carefully reviewed and selected from 28 submissions. The papers addressed challenges in multiple application areas, such as the Internet-of-Things, cloud and edge computing, and mobile systems. Some papers focused on middleware for managing concurrency and consistency in distributed systems, including data replication and transactions. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Distributed Applications and Interoperable Systems : 19th IFIP WG 6.1 International Conference, DAIS 2019, Held as Part of the 14th International Federated Conference on Distributed Computing Techniques, DisCoTec 2019, Kongens Lyngby, Denmark, June 17–21, 2019, Proceedings / [documento electrónico] / Pereira, José, ; Ricci, Laura, . - 1 ed. . - [s.l.] : Springer, 2019 . - XVII, 179 p. 101 ilustraciones, 54 ilustraciones en color.
ISBN : 978-3-030-22496-7
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: Red de computadoras Computadoras Propósitos especiales CriptografÃa Cifrado de datos (Informática) Protección de datos Ordenadores Redes de comunicación informática Sistemas de propósito especial y basados ​​en aplicaciones CriptologÃa Seguridad de datos e información Entornos informáticos Clasificación: 004.6 Ciencia de los computadores (Interfaces y comunicaciones) Resumen: Este libro constituye las actas de la 19.ª Conferencia Internacional IFIP sobre Aplicaciones Distribuidas y Sistemas Interoperables, DAIS 2019, celebrada en Kongens Lyngby, Dinamarca, en junio de 2019, como parte de la 14.ª Conferencia Federada Internacional sobre Técnicas de Computación Distribuida, DisCoTec 2019. Los artÃculos completos presentados junto con 2 artÃculos breves fueron cuidadosamente revisados ​​y seleccionados entre 28 presentaciones. Los documentos abordaron desafÃos en múltiples áreas de aplicaciones, como Internet de las cosas, computación en la nube y en el borde, y sistemas móviles. Algunos artÃculos se centraron en el middleware para gestionar la concurrencia y la coherencia en sistemas distribuidos, incluida la replicación de datos y las transacciones. Nota de contenido: Syncpal: A Simple and Iterative Reconciliation Algorithm for File Synchronizers -- Check-Wait-Pounce: Increasing Transactional Data Structure Throughput by Delaying Transactions -- Putting Order in Strong Eventual Consistency -- Composable Actor Behaviour -- Gossip Learning as a Decentralized Alternative to Federated Learning -- Using Trusted Execution Environments for Secure Stream Processing of Medical Data -- Stunner: A Smart Phone Trace for Developing Decentralized Edge Systems -- FOUGERE: User-Centric Location Privacy in Mobile Crowdsourcing Apps -- On The Performance of ARM TrustZone -- CapBAC in Hyperledger Sawtooth -- Developing Secure Services for IoT with OP-TEE: A First Look at Performance and Usability. . Tipo de medio : Computadora Summary : This book constitutes the proceedings of the 19th IFIP International Conference on Distributed Applications and Interoperable Systems, DAIS 2019, held in Kongens Lyngby, Denmark, in June 2019, as part of the 14th International Federated Conference on Distributed Computing Techniques, DisCoTec 2019. The 9 full papers presented together with 2 short papers were carefully reviewed and selected from 28 submissions. The papers addressed challenges in multiple application areas, such as the Internet-of-Things, cloud and edge computing, and mobile systems. Some papers focused on middleware for managing concurrency and consistency in distributed systems, including data replication and transactions. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Euro-Par 2016: Parallel Processing Workshops / Desprez, Frédéric ; Dutot, Pierre-François ; Kaklamanis, Christos ; Marchal, Loris ; Molitorisz, Korbinian ; Ricci, Laura ; Scarano, Vittorio ; Vega-RodrÃguez, Miguel A. ; Varbanescu, Ana Lucia ; Hunold, Sascha ; Scott, Stephen L. ; Lankes, Stefan ; Weidendorfer, Josef
TÃtulo : Euro-Par 2016: Parallel Processing Workshops : Euro-Par 2016 International Workshops, Grenoble, France, August 24-26, 2016, Revised Selected Papers Tipo de documento: documento electrónico Autores: Desprez, Frédéric, ; Dutot, Pierre-François, ; Kaklamanis, Christos, ; Marchal, Loris, ; Molitorisz, Korbinian, ; Ricci, Laura, ; Scarano, Vittorio, ; Vega-RodrÃguez, Miguel A., ; Varbanescu, Ana Lucia, ; Hunold, Sascha, ; Scott, Stephen L., ; Lankes, Stefan, ; Weidendorfer, Josef, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2017 Número de páginas: XXXIX, 829 p. 281 ilustraciones ISBN/ISSN/DL: 978-3-319-58943-5 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: Computadoras digitales electrónicas IngenierÃa de software Red de computadoras Gestión de base de datos Algoritmos Software de la aplicacion Rendimiento y evaluación del sistema Redes de comunicación informática Aplicaciones informáticas y de sistemas de información Clasificación: 004.24 Resumen: Este libro constituye las actas de los talleres de la 23.ª Conferencia Internacional sobre Computación Paralela y Distribuida, Euro-Par 2016, celebrada en Grenoble, Francia, en agosto de 2016. Los 65 artÃculos completos presentados fueron cuidadosamente revisados ​​y seleccionados entre 95 presentaciones. El volumen incluye los artÃculos de los siguientes talleres: Euro-EDUPAR (Segundo Taller Europeo sobre Educación en Computación Paralela y Distribuida para Estudiantes de Pregrado) – HeteroPar 2016 (el 14º Taller Internacional sobre Algoritmos, Modelos y Herramientas para Computación Paralela en Plataformas Heterogéneas) – IWMSE (V Taller Internacional sobre IngenierÃa de Software Multinúcleo) – LSDVE (Cuarto Taller sobre Entornos Virtuales Distribuidos a Gran Escala) - PADABS (Cuarto Taller sobre Simulaciones basadas en agentes distribuidos y paralelos) – PBio (Cuarto Taller Internacional sobre Paralelismo en Bioinformática) – PELGA ( Segundo Taller sobre IngenierÃa de Rendimiento para Análisis de Gráficos a Gran Escala) – REPPAR (Tercer Taller Internacional sobre Reproducibilidad en Computación Paralela) – Resiliencia (9º Taller sobre Resiliencia en Computación de Alto Rendimiento en Clústeres, Nubes y Redes) – ROME (Cuarto Taller sobre Tiempo de Ejecución) y Sistemas Operativos para la Era de Muchos Núcleos) – UCHPC (9º Taller sobre Computación No Convencional de Alto Rendimiento). Nota de contenido: Parallel and distributed computing education for undergraduate students.– Algorithms, models and tools for parallel computing on heterogeneous platforms -- Multicore software engineering -- Large-scale distributed virtual environments -- Parallel and distributed agent-based simulations -- Parallelism in bioinformatics.-Performance engineering for large-scale graph analytics -- Reproducibility in parallel computing -- Resilience in high performance computing in clusters, clouds, and grids -- Runtime and operating systems for the many-core era) -- UnConventional high-performance computing. Tipo de medio : Computadora Summary : This book constitutes the proceedings of the workshops of the 23rd International Conference on Parallel and Distributed Computing, Euro-Par 2016, held in Grenoble, France in August 2016. The 65 full papers presented were carefully reviewed and selected from 95 submissions. The volume includes the papers from the following workshops: Euro-EDUPAR (Second European Workshop on Parallel and Distributed Computing Education for Undergraduate Students) – HeteroPar 2016 (the 14th International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms) – IWMSE (5th International Workshop on Multicore Software Engineering) – LSDVE (Fourth Workshop on Large-Scale Distributed Virtual Environments) - PADABS (Fourth Workshop on Parallel and Distributed Agent-Based Simulations) – PBio (Fourth International Workshop on Parallelism in Bioinformatics) – PELGA (Second Workshop on Performance Engineering for Large-Scale Graph Analytics) – REPPAR (Third International Workshop on Reproducibility in Parallel Computing) – Resilience (9th Workshop in Resilience in High Performance Computing in Clusters, Clouds, and Grids) – ROME (Fourth Workshop on Runtime and Operating Systems for the Many-Core Era) – UCHPC (9th Workshop on UnConventional High-Performance Computing). Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Euro-Par 2016: Parallel Processing Workshops : Euro-Par 2016 International Workshops, Grenoble, France, August 24-26, 2016, Revised Selected Papers [documento electrónico] / Desprez, Frédéric, ; Dutot, Pierre-François, ; Kaklamanis, Christos, ; Marchal, Loris, ; Molitorisz, Korbinian, ; Ricci, Laura, ; Scarano, Vittorio, ; Vega-RodrÃguez, Miguel A., ; Varbanescu, Ana Lucia, ; Hunold, Sascha, ; Scott, Stephen L., ; Lankes, Stefan, ; Weidendorfer, Josef, . - 1 ed. . - [s.l.] : Springer, 2017 . - XXXIX, 829 p. 281 ilustraciones.
ISBN : 978-3-319-58943-5
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: Computadoras digitales electrónicas IngenierÃa de software Red de computadoras Gestión de base de datos Algoritmos Software de la aplicacion Rendimiento y evaluación del sistema Redes de comunicación informática Aplicaciones informáticas y de sistemas de información Clasificación: 004.24 Resumen: Este libro constituye las actas de los talleres de la 23.ª Conferencia Internacional sobre Computación Paralela y Distribuida, Euro-Par 2016, celebrada en Grenoble, Francia, en agosto de 2016. Los 65 artÃculos completos presentados fueron cuidadosamente revisados ​​y seleccionados entre 95 presentaciones. El volumen incluye los artÃculos de los siguientes talleres: Euro-EDUPAR (Segundo Taller Europeo sobre Educación en Computación Paralela y Distribuida para Estudiantes de Pregrado) – HeteroPar 2016 (el 14º Taller Internacional sobre Algoritmos, Modelos y Herramientas para Computación Paralela en Plataformas Heterogéneas) – IWMSE (V Taller Internacional sobre IngenierÃa de Software Multinúcleo) – LSDVE (Cuarto Taller sobre Entornos Virtuales Distribuidos a Gran Escala) - PADABS (Cuarto Taller sobre Simulaciones basadas en agentes distribuidos y paralelos) – PBio (Cuarto Taller Internacional sobre Paralelismo en Bioinformática) – PELGA ( Segundo Taller sobre IngenierÃa de Rendimiento para Análisis de Gráficos a Gran Escala) – REPPAR (Tercer Taller Internacional sobre Reproducibilidad en Computación Paralela) – Resiliencia (9º Taller sobre Resiliencia en Computación de Alto Rendimiento en Clústeres, Nubes y Redes) – ROME (Cuarto Taller sobre Tiempo de Ejecución) y Sistemas Operativos para la Era de Muchos Núcleos) – UCHPC (9º Taller sobre Computación No Convencional de Alto Rendimiento). Nota de contenido: Parallel and distributed computing education for undergraduate students.– Algorithms, models and tools for parallel computing on heterogeneous platforms -- Multicore software engineering -- Large-scale distributed virtual environments -- Parallel and distributed agent-based simulations -- Parallelism in bioinformatics.-Performance engineering for large-scale graph analytics -- Reproducibility in parallel computing -- Resilience in high performance computing in clusters, clouds, and grids -- Runtime and operating systems for the many-core era) -- UnConventional high-performance computing. Tipo de medio : Computadora Summary : This book constitutes the proceedings of the workshops of the 23rd International Conference on Parallel and Distributed Computing, Euro-Par 2016, held in Grenoble, France in August 2016. The 65 full papers presented were carefully reviewed and selected from 95 submissions. The volume includes the papers from the following workshops: Euro-EDUPAR (Second European Workshop on Parallel and Distributed Computing Education for Undergraduate Students) – HeteroPar 2016 (the 14th International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms) – IWMSE (5th International Workshop on Multicore Software Engineering) – LSDVE (Fourth Workshop on Large-Scale Distributed Virtual Environments) - PADABS (Fourth Workshop on Parallel and Distributed Agent-Based Simulations) – PBio (Fourth International Workshop on Parallelism in Bioinformatics) – PELGA (Second Workshop on Performance Engineering for Large-Scale Graph Analytics) – REPPAR (Third International Workshop on Reproducibility in Parallel Computing) – Resilience (9th Workshop in Resilience in High Performance Computing in Clusters, Clouds, and Grids) – ROME (Fourth Workshop on Runtime and Operating Systems for the Many-Core Era) – UCHPC (9th Workshop on UnConventional High-Performance Computing). Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Euro-Par 2017: Parallel Processing Workshops : Euro-Par 2017 International Workshops, Santiago de Compostela, Spain, August 28-29, 2017, Revised Selected Papers Tipo de documento: documento electrónico Autores: Heras, Dora B., ; Bougé, Luc, ; Mencagli, Gabriele, ; Jeannot, Emmanuel, ; Sakellariou, Rizos, ; Badia, Rosa M., ; Barbosa, Jorge G., ; Ricci, Laura, ; Scott, Stephen L., ; Lankes, Stefan, ; Weidendorfer, Josef, Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2018 Número de páginas: XX, 751 p. 247 ilustraciones ISBN/ISSN/DL: 978-3-319-75178-8 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: Computadoras digitales electrónicas Microprocesadores Arquitectura de Computadores Red de computadoras Computadoras Propósitos especiales Sistemas operativos (computadoras) diseño lógico Rendimiento y evaluación del sistema Arquitecturas de procesador Redes de comunicación informática Sistemas de propósito especial y basados ​​en aplicaciones Sistemas operativos Clasificación: 004.24 Resumen: Este libro constituye las actas de los talleres de la 23ª Conferencia Internacional sobre Computación Paralela y Distribuida, Euro-Par 2017, celebrada en Santiago de Compostela. España en agosto de 2017. Los 59 artÃculos completos presentados fueron cuidadosamente revisados ​​y seleccionados entre 119 envÃos. Euro-Par es una conferencia internacional anual en Europa que cubre todos los aspectos del procesamiento paralelo y distribuido. Estos van desde la teorÃa a la práctica, desde los sistemas e infraestructuras paralelos y distribuidos más pequeños hasta los más grandes, desde problemas computacionales fundamentales hasta aplicaciones completas, desde arquitectura, compilador, diseño e implementación de lenguajes e interfaces hasta herramientas, infraestructuras de soporte y aspectos de rendimiento de las aplicaciones. . Tipo de medio : Computadora Summary : This book constitutes the proceedings of the workshops of the 23rd International Conference on Parallel and Distributed Computing, Euro-Par 2017, held in Santiago de Compostela. Spain in August 2017. The 59 full papers presented were carefully reviewed and selected from 119 submissions. Euro-Par is an annual, international conference in Europe, covering all aspects of parallel and distributed processing. These range from theory to practice, from small to the largest parallel and distributed systems and infrastructures, from fundamental computational problems to full-edged applications, from architecture, compiler, language and interface design and implementation to tools, support infrastructures, and application performance aspects. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Euro-Par 2017: Parallel Processing Workshops : Euro-Par 2017 International Workshops, Santiago de Compostela, Spain, August 28-29, 2017, Revised Selected Papers [documento electrónico] / Heras, Dora B., ; Bougé, Luc, ; Mencagli, Gabriele, ; Jeannot, Emmanuel, ; Sakellariou, Rizos, ; Badia, Rosa M., ; Barbosa, Jorge G., ; Ricci, Laura, ; Scott, Stephen L., ; Lankes, Stefan, ; Weidendorfer, Josef, . - 1 ed. . - [s.l.] : Springer, 2018 . - XX, 751 p. 247 ilustraciones.
ISBN : 978-3-319-75178-8
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: Computadoras digitales electrónicas Microprocesadores Arquitectura de Computadores Red de computadoras Computadoras Propósitos especiales Sistemas operativos (computadoras) diseño lógico Rendimiento y evaluación del sistema Arquitecturas de procesador Redes de comunicación informática Sistemas de propósito especial y basados ​​en aplicaciones Sistemas operativos Clasificación: 004.24 Resumen: Este libro constituye las actas de los talleres de la 23ª Conferencia Internacional sobre Computación Paralela y Distribuida, Euro-Par 2017, celebrada en Santiago de Compostela. España en agosto de 2017. Los 59 artÃculos completos presentados fueron cuidadosamente revisados ​​y seleccionados entre 119 envÃos. Euro-Par es una conferencia internacional anual en Europa que cubre todos los aspectos del procesamiento paralelo y distribuido. Estos van desde la teorÃa a la práctica, desde los sistemas e infraestructuras paralelos y distribuidos más pequeños hasta los más grandes, desde problemas computacionales fundamentales hasta aplicaciones completas, desde arquitectura, compilador, diseño e implementación de lenguajes e interfaces hasta herramientas, infraestructuras de soporte y aspectos de rendimiento de las aplicaciones. . Tipo de medio : Computadora Summary : This book constitutes the proceedings of the workshops of the 23rd International Conference on Parallel and Distributed Computing, Euro-Par 2017, held in Santiago de Compostela. Spain in August 2017. The 59 full papers presented were carefully reviewed and selected from 119 submissions. Euro-Par is an annual, international conference in Europe, covering all aspects of parallel and distributed processing. These range from theory to practice, from small to the largest parallel and distributed systems and infrastructures, from fundamental computational problems to full-edged applications, from architecture, compiler, language and interface design and implementation to tools, support infrastructures, and application performance aspects. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Euro-Par 2018: Parallel Processing Workshops : Euro-Par 2018 International Workshops, Turin, Italy, August 27-28, 2018, Revised Selected Papers Tipo de documento: documento electrónico Autores: Mencagli, Gabriele, ; B. Heras, Dora, ; Cardellini, Valeria, ; Casalicchio, Emiliano, ; Jeannot, Emmanuel, ; Wolf, Felix, ; Salis, Antonio, ; Schifanella, Claudio, ; Manumachu, Ravi Reddy, ; Ricci, Laura, ; Beccuti, Marco, ; Antonelli, Laura, ; Garcia Sanchez, José Daniel, ; Scott, Stephen L., Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2019 Número de páginas: XVII, 841 p. 398 ilustraciones, 227 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-10549-5 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: IngenierÃa Informática Red de computadoras Sistemas operativos (computadoras) diseño lógico Inteligencia artificial Protección de datos IngenierÃa Informática y Redes Sistemas operativos Redes de comunicación informática Seguridad de datos e información Clasificación: 621.39 Ciencia de los computadores (Ingenieria de computadores) Resumen: Este libro constituye una selección revisada de artÃculos de los talleres celebrados en la 24.ª Conferencia Internacional sobre Computación Paralela y Distribuida, Euro-Par 2018, que tuvo lugar en TurÃn, Italia, en agosto de 2018. Los 64 artÃculos completos presentados en este volumen fueron cuidadosamente revisados ​​y seleccionados. de 109 presentaciones. Euro-Par es una conferencia internacional anual en Europa que cubre todos los aspectos del procesamiento paralelo y distribuido. Estos van desde la teorÃa a la práctica, desde los sistemas e infraestructuras paralelos y distribuidos más pequeños hasta los más grandes, desde problemas computacionales fundamentales hasta aplicaciones completas, desde arquitectura, compilador, diseño e implementación de lenguajes e interfaces hasta herramientas, infraestructuras de soporte y aspectos de rendimiento de las aplicaciones. . Nota de contenido: Auto-DaSP - Workshop on Autonomic Solutions for Parallel and Distributed Data Stream Processing -- TPICDS: A Two-phase Parallel Approach for Incremental Clustering of Data Streams -- Cost of Fault-tolerance on Data Stream Processing -- Autonomic and Latency-Aware Degree of Parallelism Management in Spar -- Consistency of the Fittest: Towards Dynamic Staleness Control for Edge Data Analytics -- A Multi-level Elasticity Framework for Distributed Data Stream Processing -- CBDP - Workshop on Container-based Systems for Big Data, Distributed and Parallel Computing -- A Resource Allocation Framework with Qualitative and Quantitative SLA Classes -- Automated Multi-Swarm Networking with Open Baton NFV MANO Framework -- The Impact of the Storage Tier: A Baseline Performance Analysis of containerized DBMS -- Towards Vertically Scalable Spark Applications -- COLOC - Workshop on Data Locality -- Progress Thread Placement for Overlapping MPI Non-Blocking Collectives using Simultaneous Multi-Threading -- A Methodology for Handling Data Movements by Anticipation: Position Paper -- Scalable Work-Stealing Load-Balancer for HPC Distributed Memory Systems -- NUMAPROF, A NUMA Memory Profiler -- ASPEN: An Efficient Algorithm for Data Redistribution Between Producer and Consumer Grids -- Euro-EDUPAR - Workshop on Parallel and Distributed Computing Education for Undergraduate Students -- Getting Started with CAPI SNAP: Hardware Development for Software Engineers -- Studying the Structure of Parallel Algorithms as a Key Element of High-Performance Computing Education -- From Mathematical Model to Parallel Execution to Performance Improvement: Introducing Students to a Workflow for Scientific Computing -- Integrating Parallel Computing in the Curriculum of the University Politehnica of Bucharest -- F2C-DP - Workshop on Fog-to-Cloud Distributed Processing -- Benefits of a fog-to-cloud approach in proximity marketing -- Multi-tenant Pub/Sub Processing for Real-time Data Streams -- A Review of Mobility Prediction Models Applied in Cloud/Fog Environments -- An Architecture for Resource Management in a Fog-to-Cloud Framework -- Enhancing Service Management Systems with Machine Learning in Fog-to-Cloud Networks -- A knowledge-based IoT Security Checker -- MAD-C: Multi-stage Approximate Distributed Cluster-combining for obstacle detection and localization -- FPDAPP - Workshop on Future Perspective of Decentralised Applications -- A Suite of Tools for the Forensic Analysis of Bitcoin Transactions: Preliminary Report -- On and Off-Blockchain Enforcement Of Smart Contracts -- MaRSChain: Framework for a Fair Manuscript Review System Based on Permissioned Blockchain -- Tamper-Proof Volume Tracking in Supply Chains with Smart Contracts -- A blockchain based system to ensure transparency and reliability in food supply chain -- Selecting Effective Blockchain Solutions -- HeteroPar - Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms -- Evaluation through Realistic Simulations of File Replication Strategies for Large Heterogeneous Distributed Systems -- Modeling and Optimizing data transfer in GPU-Accelerated Optical Coherence Tomography -- A Modular Precision Format for decoupling Arithmetic Format and Storage Format -- Benchmarking the NVIDIA V100 GPU and Tensor Cores -- SiL: An Approach for Adjusting Applications to Heterogeneous Systems Under Perturbations -- Merging the Publish-Subscribe Pattern with the Shared Memory Paradigm -- Towards Application-Centric Parallel Memories -- Fast Heuristic-Based GPU Compiler Sequence Specialization -- Accelerating Online Change-Point Detection Algorithm using 10GbE FPGA NIC -- OS-ELM-FPGA: An FPGA-Based Online Sequential Unsupervised Anomaly Detector -- LSDVE - Workshop on Large Scale Distributed Virtual Environments -- The Drivers Behind Blockchain Adoption: The Rationality of Irrational Choices -- Field Experiment on the Performance of an Android-based Opportunistic Network -- Distributed computation of mobility patterns in a smartcity environment -- Exploiting community detection to recommend privacy policies in Decentralized Online Social Networks -- ComeHere: exploiting Ethereum for secure sharing of health-care data -- Med-HPC - Workshop on Advances in High-Performance Bioinformatics, Systems Biology -- BaaS - Bioinformatics as a Service -- Disaggregating Non-Volatile Memory for Throughput-Oriented Genomics Workloads -- GPU accelerated analysis of Treg-Teff cross regulation in relapsing-remitting multiple sclerosis -- Cross-Environment comparison of a bioinformatics pipeline: perspectives for hybrid computations -- High Performance Computing for Haplotyping: Models and Platforms -- PCDLifeS - Workshop on Parallel and Distributed Computing for Life Sciences: Algorithms, Methodologies and Tools -- Effect of Spatial Decomposition on the Efficiency of k Nearest Neighbors Search in Spatial Interpolation -- Understanding chromatin structure: efficient computational implementation of polymer physics models -- Towards Heterogeneous Network Alignment: Design and Implementation of a large-scale data processing framework -- A Parallel Cellular Automaton Model For Adenocarcinomas in Situ with Java: Study of One Case -- Performance evaluation for a PETSc Parallel-in-Time Solver based on MGRIT algorithm -- RePara - Workshop on Reengineering for Parallelism in Heterogeneous Parallel Platforms -- Programmable HSA Accelerators for Zynq UltraScale+ MPSoC Systems -- Service Level Objectives via C++11 Attributes -- InKS, a Programming Model to Decouple Performance from Semantics in HPC Codes -- Refactoring Loops with Nested IFs for SIMD Extensions without Masked Instructions -- Resilience - Workshop on Resiliency in High Performance Computing with Clouds, Grids, and Clusters -- Do moldable applications perform better on failure-prone HPC platforms -- FINJ: A Fault Injection Tool for HPC Systems -- Performance Efficient Multiresilience using Checkpoint Recovery in Iterative Algorithms. Tipo de medio : Computadora Summary : This book constitutes revised selected papers from the workshops held at 24th International Conference on Parallel and Distributed Computing, Euro-Par 2018, which took place in Turin, Italy, in August 2018. The 64 full papers presented in this volume were carefully reviewed and selected from 109 submissions. Euro-Par is an annual, international conference in Europe, covering all aspects of parallel and distributed processing. These range from theory to practice, from small to the largest parallel and distributed systems and infrastructures, from fundamental computational problems to full-edged applications, from architecture, compiler, language and interface design and implementation to tools, support infrastructures, and application performance aspects. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Euro-Par 2018: Parallel Processing Workshops : Euro-Par 2018 International Workshops, Turin, Italy, August 27-28, 2018, Revised Selected Papers [documento electrónico] / Mencagli, Gabriele, ; B. Heras, Dora, ; Cardellini, Valeria, ; Casalicchio, Emiliano, ; Jeannot, Emmanuel, ; Wolf, Felix, ; Salis, Antonio, ; Schifanella, Claudio, ; Manumachu, Ravi Reddy, ; Ricci, Laura, ; Beccuti, Marco, ; Antonelli, Laura, ; Garcia Sanchez, José Daniel, ; Scott, Stephen L., . - 1 ed. . - [s.l.] : Springer, 2019 . - XVII, 841 p. 398 ilustraciones, 227 ilustraciones en color.
ISBN : 978-3-030-10549-5
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: IngenierÃa Informática Red de computadoras Sistemas operativos (computadoras) diseño lógico Inteligencia artificial Protección de datos IngenierÃa Informática y Redes Sistemas operativos Redes de comunicación informática Seguridad de datos e información Clasificación: 621.39 Ciencia de los computadores (Ingenieria de computadores) Resumen: Este libro constituye una selección revisada de artÃculos de los talleres celebrados en la 24.ª Conferencia Internacional sobre Computación Paralela y Distribuida, Euro-Par 2018, que tuvo lugar en TurÃn, Italia, en agosto de 2018. Los 64 artÃculos completos presentados en este volumen fueron cuidadosamente revisados ​​y seleccionados. de 109 presentaciones. Euro-Par es una conferencia internacional anual en Europa que cubre todos los aspectos del procesamiento paralelo y distribuido. Estos van desde la teorÃa a la práctica, desde los sistemas e infraestructuras paralelos y distribuidos más pequeños hasta los más grandes, desde problemas computacionales fundamentales hasta aplicaciones completas, desde arquitectura, compilador, diseño e implementación de lenguajes e interfaces hasta herramientas, infraestructuras de soporte y aspectos de rendimiento de las aplicaciones. . Nota de contenido: Auto-DaSP - Workshop on Autonomic Solutions for Parallel and Distributed Data Stream Processing -- TPICDS: A Two-phase Parallel Approach for Incremental Clustering of Data Streams -- Cost of Fault-tolerance on Data Stream Processing -- Autonomic and Latency-Aware Degree of Parallelism Management in Spar -- Consistency of the Fittest: Towards Dynamic Staleness Control for Edge Data Analytics -- A Multi-level Elasticity Framework for Distributed Data Stream Processing -- CBDP - Workshop on Container-based Systems for Big Data, Distributed and Parallel Computing -- A Resource Allocation Framework with Qualitative and Quantitative SLA Classes -- Automated Multi-Swarm Networking with Open Baton NFV MANO Framework -- The Impact of the Storage Tier: A Baseline Performance Analysis of containerized DBMS -- Towards Vertically Scalable Spark Applications -- COLOC - Workshop on Data Locality -- Progress Thread Placement for Overlapping MPI Non-Blocking Collectives using Simultaneous Multi-Threading -- A Methodology for Handling Data Movements by Anticipation: Position Paper -- Scalable Work-Stealing Load-Balancer for HPC Distributed Memory Systems -- NUMAPROF, A NUMA Memory Profiler -- ASPEN: An Efficient Algorithm for Data Redistribution Between Producer and Consumer Grids -- Euro-EDUPAR - Workshop on Parallel and Distributed Computing Education for Undergraduate Students -- Getting Started with CAPI SNAP: Hardware Development for Software Engineers -- Studying the Structure of Parallel Algorithms as a Key Element of High-Performance Computing Education -- From Mathematical Model to Parallel Execution to Performance Improvement: Introducing Students to a Workflow for Scientific Computing -- Integrating Parallel Computing in the Curriculum of the University Politehnica of Bucharest -- F2C-DP - Workshop on Fog-to-Cloud Distributed Processing -- Benefits of a fog-to-cloud approach in proximity marketing -- Multi-tenant Pub/Sub Processing for Real-time Data Streams -- A Review of Mobility Prediction Models Applied in Cloud/Fog Environments -- An Architecture for Resource Management in a Fog-to-Cloud Framework -- Enhancing Service Management Systems with Machine Learning in Fog-to-Cloud Networks -- A knowledge-based IoT Security Checker -- MAD-C: Multi-stage Approximate Distributed Cluster-combining for obstacle detection and localization -- FPDAPP - Workshop on Future Perspective of Decentralised Applications -- A Suite of Tools for the Forensic Analysis of Bitcoin Transactions: Preliminary Report -- On and Off-Blockchain Enforcement Of Smart Contracts -- MaRSChain: Framework for a Fair Manuscript Review System Based on Permissioned Blockchain -- Tamper-Proof Volume Tracking in Supply Chains with Smart Contracts -- A blockchain based system to ensure transparency and reliability in food supply chain -- Selecting Effective Blockchain Solutions -- HeteroPar - Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms -- Evaluation through Realistic Simulations of File Replication Strategies for Large Heterogeneous Distributed Systems -- Modeling and Optimizing data transfer in GPU-Accelerated Optical Coherence Tomography -- A Modular Precision Format for decoupling Arithmetic Format and Storage Format -- Benchmarking the NVIDIA V100 GPU and Tensor Cores -- SiL: An Approach for Adjusting Applications to Heterogeneous Systems Under Perturbations -- Merging the Publish-Subscribe Pattern with the Shared Memory Paradigm -- Towards Application-Centric Parallel Memories -- Fast Heuristic-Based GPU Compiler Sequence Specialization -- Accelerating Online Change-Point Detection Algorithm using 10GbE FPGA NIC -- OS-ELM-FPGA: An FPGA-Based Online Sequential Unsupervised Anomaly Detector -- LSDVE - Workshop on Large Scale Distributed Virtual Environments -- The Drivers Behind Blockchain Adoption: The Rationality of Irrational Choices -- Field Experiment on the Performance of an Android-based Opportunistic Network -- Distributed computation of mobility patterns in a smartcity environment -- Exploiting community detection to recommend privacy policies in Decentralized Online Social Networks -- ComeHere: exploiting Ethereum for secure sharing of health-care data -- Med-HPC - Workshop on Advances in High-Performance Bioinformatics, Systems Biology -- BaaS - Bioinformatics as a Service -- Disaggregating Non-Volatile Memory for Throughput-Oriented Genomics Workloads -- GPU accelerated analysis of Treg-Teff cross regulation in relapsing-remitting multiple sclerosis -- Cross-Environment comparison of a bioinformatics pipeline: perspectives for hybrid computations -- High Performance Computing for Haplotyping: Models and Platforms -- PCDLifeS - Workshop on Parallel and Distributed Computing for Life Sciences: Algorithms, Methodologies and Tools -- Effect of Spatial Decomposition on the Efficiency of k Nearest Neighbors Search in Spatial Interpolation -- Understanding chromatin structure: efficient computational implementation of polymer physics models -- Towards Heterogeneous Network Alignment: Design and Implementation of a large-scale data processing framework -- A Parallel Cellular Automaton Model For Adenocarcinomas in Situ with Java: Study of One Case -- Performance evaluation for a PETSc Parallel-in-Time Solver based on MGRIT algorithm -- RePara - Workshop on Reengineering for Parallelism in Heterogeneous Parallel Platforms -- Programmable HSA Accelerators for Zynq UltraScale+ MPSoC Systems -- Service Level Objectives via C++11 Attributes -- InKS, a Programming Model to Decouple Performance from Semantics in HPC Codes -- Refactoring Loops with Nested IFs for SIMD Extensions without Masked Instructions -- Resilience - Workshop on Resiliency in High Performance Computing with Clouds, Grids, and Clusters -- Do moldable applications perform better on failure-prone HPC platforms -- FINJ: A Fault Injection Tool for HPC Systems -- Performance Efficient Multiresilience using Checkpoint Recovery in Iterative Algorithms. Tipo de medio : Computadora Summary : This book constitutes revised selected papers from the workshops held at 24th International Conference on Parallel and Distributed Computing, Euro-Par 2018, which took place in Turin, Italy, in August 2018. The 64 full papers presented in this volume were carefully reviewed and selected from 109 submissions. Euro-Par is an annual, international conference in Europe, covering all aspects of parallel and distributed processing. These range from theory to practice, from small to the largest parallel and distributed systems and infrastructures, from fundamental computational problems to full-edged applications, from architecture, compiler, language and interface design and implementation to tools, support infrastructures, and application performance aspects. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
TÃtulo : Euro-Par 2019: Parallel Processing Workshops : Euro-Par 2019 International Workshops, Göttingen, Germany, August 26–30, 2019, Revised Selected Papers / Tipo de documento: documento electrónico Autores: Schwardmann, Ulrich, ; Boehme, Christian, ; B. Heras, Dora, ; Cardellini, Valeria, ; Jeannot, Emmanuel, ; Salis, Antonio, ; Schifanella, Claudio, ; Manumachu, Ravi Reddy, ; Schwamborn, Dieter, ; Ricci, Laura, ; Sangyoon, Oh, ; Gruber, Thomas, ; Antonelli, Laura, ; Scott, Stephen L., Mención de edición: 1 ed. Editorial: [s.l.] : Springer Fecha de publicación: 2020 Número de páginas: XVII, 763 p. 304 ilustraciones, 192 ilustraciones en color. ISBN/ISSN/DL: 978-3-030-48340-1 Nota general: Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos. Idioma : Inglés (eng) Palabras clave: IngenierÃa Informática Red de computadoras IngenierÃa de software Microprogramación diseño lógico IngenierÃa Informática y Redes Redes de comunicación informática Estructuras de control y microprogramación. Clasificación: 621.39 Ciencia de los computadores (Ingenieria de computadores) Resumen: Este libro constituye una selección revisada de artÃculos de los talleres celebrados en la 25.ª Conferencia Internacional sobre Computación Paralela y Distribuida, Euro-Par 2019, que tuvo lugar en Göttingen, Alemania, en agosto de 2019. Los 53 artÃculos completos y 10 artÃculos tipo póster presentados en este volumen fueron cuidadosamente revisado y seleccionado entre 77 presentaciones. Euro-Par es una conferencia internacional anual en Europa que cubre todos los aspectos del procesamiento paralelo y distribuido. Estos van desde la teorÃa a la práctica, desde los sistemas e infraestructuras paralelos y distribuidos más pequeños hasta los más grandes, desde problemas computacionales fundamentales hasta aplicaciones completas, desde arquitectura, compilador, diseño e implementación de lenguajes e interfaces hasta herramientas, infraestructuras de soporte y aspectos de rendimiento de las aplicaciones. . El capÃtulo "Visualización in situ de datos relacionados con el rendimiento en aplicaciones CFD paralelas" está disponible en acceso abierto bajo una licencia internacional Creative Commons Attribution4.0 a través de link.springer.com. Nota de contenido: Auto-DASP - Workshop on Autonomic Solutions for Parallel and Distributed Data Stream Processing -- COLOC - Workshop on Data Locality -- F2C-DP - Workshop on Fog-to-Cloud Distributed Processing -- FPDAPP - International Workshop on Future Perspectives of Decentralized Applications -- HeteroPar - Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms -- HPCN - Workshop on High Performance Computing and Networking in Aerospace -- LSDVE - Seventh Workshop on Large Scale Distributed Virtual Environments -- ParaMo - Workshop on Parallel Programming Models in HP Cloud -- PCDLifeS - Workshop on Parallel and Distributed Computing for Life Sciences: Algorithms, Methodologies and Tools -- PMACS - Workshop on Performance Monitoring and Analysis of Cluster Systems -- Resilience - Twelfth Workshop on Resiliency in High Performance Computing in Clouds, Grids, and Clusters -- Poster Papers. Tipo de medio : Computadora Summary : This book constitutes revised selected papers from the workshops held at 25th International Conference on Parallel and Distributed Computing, Euro-Par 2019, which took place in Göttingen, Germany, in August 2019. The 53 full papers and 10 poster papers presented in this volume were carefully reviewed and selected from 77 submissions. Euro-Par is an annual, international conference in Europe, covering all aspects of parallel and distributed processing. These range from theory to practice, from small to the largest parallel and distributed systems and infrastructures, from fundamental computational problems to full-edged applications, from architecture, compiler, language and interface design and implementation to tools, support infrastructures, and application performance aspects. Chapter "In Situ Visualization of Performance-Related Data in Parallel CFD Applications" is available open access under a Creative Commons Attribution4.0 International License via link.springer.com. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...] Euro-Par 2019: Parallel Processing Workshops : Euro-Par 2019 International Workshops, Göttingen, Germany, August 26–30, 2019, Revised Selected Papers / [documento electrónico] / Schwardmann, Ulrich, ; Boehme, Christian, ; B. Heras, Dora, ; Cardellini, Valeria, ; Jeannot, Emmanuel, ; Salis, Antonio, ; Schifanella, Claudio, ; Manumachu, Ravi Reddy, ; Schwamborn, Dieter, ; Ricci, Laura, ; Sangyoon, Oh, ; Gruber, Thomas, ; Antonelli, Laura, ; Scott, Stephen L., . - 1 ed. . - [s.l.] : Springer, 2020 . - XVII, 763 p. 304 ilustraciones, 192 ilustraciones en color.
ISBN : 978-3-030-48340-1
Libro disponible en la plataforma SpringerLink. Descarga y lectura en formatos PDF, HTML y ePub. Descarga completa o por capítulos.
Idioma : Inglés (eng)
Palabras clave: IngenierÃa Informática Red de computadoras IngenierÃa de software Microprogramación diseño lógico IngenierÃa Informática y Redes Redes de comunicación informática Estructuras de control y microprogramación. Clasificación: 621.39 Ciencia de los computadores (Ingenieria de computadores) Resumen: Este libro constituye una selección revisada de artÃculos de los talleres celebrados en la 25.ª Conferencia Internacional sobre Computación Paralela y Distribuida, Euro-Par 2019, que tuvo lugar en Göttingen, Alemania, en agosto de 2019. Los 53 artÃculos completos y 10 artÃculos tipo póster presentados en este volumen fueron cuidadosamente revisado y seleccionado entre 77 presentaciones. Euro-Par es una conferencia internacional anual en Europa que cubre todos los aspectos del procesamiento paralelo y distribuido. Estos van desde la teorÃa a la práctica, desde los sistemas e infraestructuras paralelos y distribuidos más pequeños hasta los más grandes, desde problemas computacionales fundamentales hasta aplicaciones completas, desde arquitectura, compilador, diseño e implementación de lenguajes e interfaces hasta herramientas, infraestructuras de soporte y aspectos de rendimiento de las aplicaciones. . El capÃtulo "Visualización in situ de datos relacionados con el rendimiento en aplicaciones CFD paralelas" está disponible en acceso abierto bajo una licencia internacional Creative Commons Attribution4.0 a través de link.springer.com. Nota de contenido: Auto-DASP - Workshop on Autonomic Solutions for Parallel and Distributed Data Stream Processing -- COLOC - Workshop on Data Locality -- F2C-DP - Workshop on Fog-to-Cloud Distributed Processing -- FPDAPP - International Workshop on Future Perspectives of Decentralized Applications -- HeteroPar - Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms -- HPCN - Workshop on High Performance Computing and Networking in Aerospace -- LSDVE - Seventh Workshop on Large Scale Distributed Virtual Environments -- ParaMo - Workshop on Parallel Programming Models in HP Cloud -- PCDLifeS - Workshop on Parallel and Distributed Computing for Life Sciences: Algorithms, Methodologies and Tools -- PMACS - Workshop on Performance Monitoring and Analysis of Cluster Systems -- Resilience - Twelfth Workshop on Resiliency in High Performance Computing in Clouds, Grids, and Clusters -- Poster Papers. Tipo de medio : Computadora Summary : This book constitutes revised selected papers from the workshops held at 25th International Conference on Parallel and Distributed Computing, Euro-Par 2019, which took place in Göttingen, Germany, in August 2019. The 53 full papers and 10 poster papers presented in this volume were carefully reviewed and selected from 77 submissions. Euro-Par is an annual, international conference in Europe, covering all aspects of parallel and distributed processing. These range from theory to practice, from small to the largest parallel and distributed systems and infrastructures, from fundamental computational problems to full-edged applications, from architecture, compiler, language and interface design and implementation to tools, support infrastructures, and application performance aspects. Chapter "In Situ Visualization of Performance-Related Data in Parallel CFD Applications" is available open access under a Creative Commons Attribution4.0 International License via link.springer.com. Enlace de acceso : https://link-springer-com.biblioproxy.umanizales.edu.co/referencework/10.1007/97 [...]
Permalink
